Evaluation of Intestinal Absorption of Dietary Halocynthiaxanthin,a Carotenoid from the Sea Squirt Halocynthia roretzi

Halocynthiaxanthin is an acetylenic carotenoid mainly found in Halocynthia roretzi. To date, several bioactivities of halocynthiaxanthin have been reported, but its mechanism of digestion and absorption in mammals has not been studied yet. In this study, we evaluated the intestinal absorption of halocynthiaxanthin in mice. The halocynthiaxanthin-rich fraction was prepared from the tunicate Halocynthia roretzi. Mice were orally administered the fraction at a dose of 5 mg/kg body weight. The halocynthiaxanthin levels in the plasma, liver, and small intestine, were quantified using HPLC-PDA, 1, 3, 6, and 9 h after ingestion. The halocynthiaxanthin-rich fraction mainly consisted of the all-trans form and a small amount of cis forms. These three isomers were detected in the plasma of mice 3 h after ingestion. Time-course changes after the ingestion of this fraction were found, with cis isomers being more abundant than the all-trans isomer in the mouse plasma and liver. In the small intestine, however, the all-trans isomer was primarily detected. The possibility that cis isomers might be absorbed rapidly from the small intestine cannot be denied, but our results suggest that dietary all-trans-halocynthiaxanthin might be isomerized to the cis isomer after intestinal absorption.     

Mathematical Simulation of Small Log Ripped by Slasher Saw

Withthesmallsawlogwidespreadused,theuncut-boardsandslabsarecutbythemulti-bitrippingedgerinthejhoberindustw.AfersawingripPed,theunedgedboedaccuratelyvolumeisfAnotherparametCrsaredefinitebyadrawing,theaPProimatevolumeforn1ulateofunedgedboardistx,y,~inatC,x'…     

High-speed steel tool wear during wood cutting in the presence of high-temperature corrosion and mineral contamination

Dulling of high-speed steel (HSS) cutting tools after milling five wood species has been analyzed. The wood investigated varied in mineral contamination, high-temperature corrosivity (HTC) and density (D). Experiments performed proved that up to date methods for evaluation of mineral contamination in wood should be improved. A new pipe-like form of mineral contamination particles was evidenced. The correlation between the presence of 3D aggregates of silica in wood and high content of K and Ca in the ash was established. Employing multivariable theoretical simulation method, the combined effect of mineral contamination, HTC and wood density on the tool dullness appeared to be a reasonable explanation of the results obtained.     

Automatic detection of washboarding in bandsaws

This paper presents an on-line method for detecting washboarding generated in bandsaws. It uses a parameter based on the shape of sawing force amplitude distributions. The curve of the probability density function of the parallel sawing force amplitude obeyed a normal distribution for the normal sawn surface, but it changed to an M-shaped distribution when washboarding appeared on the sawn surface of the workpiece. The curve of probability density function of the normal sawing force amplitude obeyed the normal distribution for any sawn surface investigated. The workpiece including a knot did not influence use of the parameter for detecting the appearance of washboarding.     

Locating and identifying sound knots and dead knots on sugi by the rule-based color vision system

Knowledge of the occurrence of sound and dead knots on the surface of sugi is important for the classification and application of the material. This study examined a color vision system for detecting sound and dead knots on sugi. The system can be conceptually divided into three components: a CCD-camera scanning system, an image-segmenting module, and a rule-based defect identifying module. The results showed that the potential defect regions could be located by Otsus threshold algorithm in conjunction with t-test analysis. The accuracies of locating sound knots and dead knots were 92.6% and 97.1%, respectively. The rule-based approach was used to identify sound and dead knots and the identifying accuracies for sound knots and dead knots were 92.0% and 94.1%, respectively. The overall detection accuracy of the system was 87.6%. The results indicated that the rule-based color vision system is an efficient means of detecting sound knots and dead knots on sugi.     

Effect of tool angles on the chips generated during milling of wood by straight router-bits

 The effect of tool angles on the shapes of chips generated by parallel-to-grain and end-grain milling was explored for China fir and maple under fixed spindle and feed speeds and cutting depth. The milling path was up-milling by straight router-bits with a diameter of 12 mm. The chip shapes could be distinguished as five types: spiral, splinter, flow, thin, and granules or powder. The flow and thin chips were generated most often (on a weight percentage basis) for all tool angles investigated for parallel-to-grain and end-grain milling of China fir and maple. More granule chips were produced with parallel-to-grain milling than with end-grain milling for both woods. The measured chip thickness (t′) was thicker than the calculated thickness (t _max). Thicker and longer maple chips were produced by end-grain milling than by parallel-to-grain milling. The tool geometries of 40°/15° (sharpness of the angle–rake angle), 50°/15°, and 60°/15° for China fir and 40°/25°, 50°/5°, and 60°/5° for maple produced relatively more flow chips with parallel-to-grain milling. Furthermore, the tool geometries of 40°/5°, 50°/15° and 60°/25° produced more flow chips (weight percentage) by end-grain milling of China fir and maple. Received: May 23, 2001 / Accepted: June 28, 2002 Acknowledgment This study was supported by a grant from the National Council of Science, Taiwan (NSC89-2313-B-415-011).     

Antiallergic tea catechin, (-)-epigallocatechin-3-O-(3-O-methyl)-gallate,suppresses FcepsilonRI expression in human basophilic KU812 cells

We previously found that the O-methylated derivative of (-)-epigallocatechin-3-O-gallate (EGCg), (-)-epigallocatechin-3-O-(3-O-methyl)-gallate (EGCG' '3Me), has potent antiallergic activity. The high-affinity IgE receptor, FcepsilonRI, is found at high levels on basophils and mast cells and plays a key role in a series of acute and chronic human allergic reactions. To understand the mechanism of action for the antiallergic EGCG' '3Me, the effect of EGCG' '3Me on the cell surface expression of FcepsilonRI in human basophilic KU812 cells was examined. Flow cytometric analysis showed that EGCG' '3Me was able to decrease the cell surface expression of FcepsilonRI. Moreover, immunoblot analysis revealed that total cellular expression of the FcepsilonRI alpha chain decreased upon treatment with EGCG' '3Me. FcepsilonRI is a tetrameric structure comprising one alpha chain, one beta chain, and two gamma chains. The level of mRNA production of each subunit in KU812 cells was investigated. EGCG' '3Me reduced FcepsilonRI alpha and gamma mRNA levels. The cross-linkage of FcepsilonRI causes the activation of basophils, which leads to the secretion of inflammatory mediators including histamine. EGCG' '3Me treatment inhibited the FcepsilonRI cross-linking-induced histamine release. These results suggested that EGCG' '3Me can negatively regulate basophil activation through the suppression of FcepsilonRI expression.     

Radiocesium transfer from Andosols to brown rice in the northern and northwest areas of Tochigi Prefecture,in the first 3 years following the 2011 Fukushima Daiichi nuclear power plant accident

ABSTRACT

Following the Fukushima Daiichi Nuclear Power Plant accident of 2011, the potential for radiocesium transfer from contaminated soils, such as Andosols, to agricultural crops became a significant concern. Andosols account for up to 70％ of paddy soils in the northern and northwest areas of Tochigi Prefecture, where the radiocesium concentration is 1000 Bq kg^?1 or greater in the soil of some fields. The present study was carried out in order to determine the phytoavailability of radiocesium in Andosols by comparing it with that of gray lowland soils in the first 3 years following the accident. The transfer factor (TF) tended to be higher in Andosols than in gray lowland soils, leading to higher radiocesium concentrations in brown rice grown in Andosols. The exchangeable potassium (Ex-K₂O) in Andosols was highly and negatively correlated with TF, followed by clay. The Ex-K₂O value was positively correlated with the clay/total carbon (T-C) value, suggesting that a high T–C ratio could weaken K₂O adsorption on clay mineral sites; hence, the low clay/T-C values can partially explain the relatively large TF values of Andosols. Samples with Ex-K₂O contents less than 200 mg kg^?1 and with low clay/T-C values showed striking decreases in TF values from 2011 to 2012. However, the decrease from 2012 to 2013 was quite small; radiocesium in these samples was potentially available for rice uptake for a long time, likely due to the reversible adsorption and fixation characteristics of allophane. Most gray lowland soil samples showed very low TF values over the 3 years of the study, except for those with TF values greater than 0.1 due to low Ex-K₂O and clay contents; the geometric mean (GM) value of TF was below 0.01 in 2012. The extraction of exchangeable radiocesium (Ex-Cs) with a 1 mol L^?1 ammonium acetate solution may not be an appropriate method for explaining the variability in radiocesium TF in Andosols. This is because the Ex-Cs value was significantly correlated with Ex-K₂O in Andosols, but not in gray lowland soils, indicating that Ex-K₂O explained this variability in relation to Ex-Cs.