Development and testing of a surface roughness measurement device based on aerial ultrasonic reflections

Paddy and Water Environment - Repairs of concrete irrigation channels in Japan are guided to a large extent by the degree to which their walls have degraded over decades of use. Current methods of...     

Sodium bicarbonate protects uranium-induced acute nephrotoxicity through uranium-decorporation by urinary alkalinization in rats

To evaluate the effectiveness of sodium bicarbonate (SB) in removing uranium and protecting animals from uranium toxicity, we intramuscularly administered 1 mg/kg of uranyl nitrate to 8-wk-old male SD rats, and 20 min after administration of uranyl nitrate, the animals were given a single oral administration of SB at 0.1, 0.3 or 1 g/kg. The SB treatment at a dose of 0.3 g/kg or more raised the pH of the rats’ urine until 4 h after treatment, and it significantly reduced the uranium amounts in the kidneys at 1 day after treatment. In another experiment, rats were intramuscularly administered 1 mg/kg of uranyl nitrate, and 20 min later, the animals were treated with sodium bicarbonate (0.1 or 1 g/kg). The rats were autopsied at 1, 3 and 7 days after uranium treatment. High-dose SB resulted in a significant increase in urinary uranium excretion in the first 24 h and a reduction of uranium deposition in the kidneys and femurs, and it also significantly suppressed uranium-induced renal toxicity, as shown by both histopathology and clinical chemistry at 3 days after uranium treatment. Low-dose SB did not show such marked effects. Our findings demonstrated that the uranium decorporation effect of sodium bicarbonate was observed at the dosage showing urine alkalinization in rats and that decorporation effect of sodium bicarbonate might be beneficial if it is administered immediately after incorporation of soluble uranium.     

Investigation of relationships between cell and pulp properties in Eucalyptus by examination of within-tree property variations

 Relationships between cell and pulp properties were investigated by examining the within-tree property variations in Eucalyptus camaldulensis and Eucalyptus globulus. Properties investigated included proportions of ray and axial parenchyma, thickness of cell walls and cell wall percentages. The characteristics of the ray and axial parenchyma (their proportions and wall thickness) were found to have a significant influence on all measured pulp properties, including paper strength properties. Multiple regression of pulp properties in relation to cell properties revealed that nearly all measured pulp properties were explained by cell properties at the 1% significance level. It was concluded, therefore, that all cell types are important for predicting pulp properties, and it is strongly recommended that tree breeding programs for Eucalyptus include the measurement of all cell types. Received 6 July 1999     

Effect of shoot size and phenological variation of host plants on the spatial patterns of cynipid galls

The effects of shoot size and differences in budburst phenology ofQuercus serrata trees on the spatial patterns of galls were investigated for two cynipid species: the sexual generation ofAndricus moriokae and the agamic generation ofAphelonyx glanduliferae. There were marked differences in budburst phenology, but these did not affect the gall density on the tree. The galls of both cynipids showed a contagious distribution in their respective trees, but different abundance patterns under high gall density. The mean number of galls ofA. glanduliferae over a shoot size range was positively correlated with shoot size. More galls ofA. moriokae appeared on larger shoots on trees on which many buds had started growing before oviposition by the agamic adults. In the case of a tree on which a few buds had burst by the time of oviposition, the mean numbers ofA. moriokae galls on shoots of particular size ranges depended on the frequency of shoots in the size class. These results suggest that, although these cynipids prefer to attack larger shoots within a host tree, they may exhibit plasticity in their preference in response to changes in budburst phenology of the host plant relative to the time of oviposition.     

Effects of light and microsite conditions on tree size of 6-year-old Cryptomeria japonica planted in a group selection opening

We examined the extent to which direct and indirect measures of light and microsite conditions could explain variation in tree height and diameter at the base of 6-year-old Cryptomeria japonica trees planted in a group selection opening of about 0.32 ha on a steep slope at Shiiba, Miyazaki Prefecture, southern Japan. We first used the gap light index (GLI) and soil thickness (ST) as directly measured indices. For an indirect measure of light, we used a between-cohort competition index (BCI) estimated from the position and total height of residual trees. For indirect measures of microsite, we examined topographic indices (slope, plan and profile curvature, average slope gradient, and relative elevation) derived from digital elevation models (DEMs) with different resolutions ranging from 2 to 10 m. The multiple linear regression using GLI and ST explained about 45% of variation in tree size, while simple regression using only GLI explained about 35%. The contribution of ST was about half of GLI. The multiple regressions using BCI and the topographic indices did not explain any more variation than using BCI alone (R ² of about 0.26). We conclude that microsite conditions with shallower soil and steeper slope have negative effects on tree growth in group selection openings, although the relative importance is smaller than light conditions. More comprehensive studies considering several openings with more heterogeneous topography including different species are needed to generalize our growth prediction using the indirect measures, which are useful for practical forest management.     

Heat budget and statistical analysis of the relationship between stream temperature and riparian forest in the Toikanbetsu River basin, northern Japan

Riparian forests greatly influence aquatic ecosystems by providing shade cover, which controls water temperature and limits primary production. We examined the relationship between forest cover and summer stream temperature in northernmost Japan. Heat budget and statistical analyses were employed and the results were compared. Heat budget analysis revealed that the water temperature would decrease almost linearly from 29°C to 25°C with an increase in forested reaches along a 3.2 km stretch of the river. Multiple regression analysis by the stepwise method chose only open channel length as a variable to explain the variation in maximum stream temperature. A sharp increase in stream temperature was noted when riparian forest cover was removed in short lengths, of up to 1.0km; this increasing trend gradually flattened as the length of open stretch increased. Thus, even small openings in the riparian canopy resulted in drastic rises in summer stream temperature. The maximum summer temperatures estimated by the two methods were coincided, and can therefore be accurately estimated by regression analysis. Retrospective analysis based on the regression equation showed that the maximum summer temperature in 1947 was 6°C lower than at present, and that a sharp increase occurred from 1947 to 1960, a period of rapid expansion of agricultural land development in the watershed.     

Fundamental studies on wood/cellulose-plastic composites: effects of composition and cellulose dimension on the properties of cellulose/PP composite

Although wood/cellulose-plastic composites (WPC) of low wood/cellulose content have been more accepted worldwide and are promoted as low-maintenance, high-durability building products, composites containing high wood/cellulose content are not yet developed on an industrial scale. In this study, flow properties, mechanical properties, and water absorption properties of the compounds of cellulose microfiber/polypropylene (PP) and maleic anhydride-grafted polypropylene (MAPP) were investigated to understand effects of the high cellulose content and the dimensions of the cellulose microfiber. The molding processes studied included compression, injection, and extrusion. It was found that fluidity is not only dependent on resin content but also on the dimension of the filler; fluidity of the compound declined with increased fiber length with the same resin content. Dispersion of the composite was monitored by charge-coupled device (CCD) microscope. Increasing the plastic content in the cellulose-plastic formulation improved the strength of mold in addition to the bond development between resin and filler, and the tangle of fibers. The processing mode affected the physicomechanical properties of the cellulosic plastic. Compression-molded samples exhibited the lowest modulus of rupture (MOR) and modulus of elasticity (MOE) and the highest water absorption, while samples that were injection-molded exhibited the highest MOR (70 MPa) and MOE (7 GPa) and low water absorption (2%).     

A broad spectrum,one-step RT-PCR to detect <Emphasis Type="Italic">Satsuma dwarf virus</Emphasis> variants using universal primers targeting both segmented RNAs 1 and 2

Universal primers to detect Satsuma dwarf virus (SDV), including distantly related strains Citrus mosaic virus (CiMV), Navel orange infectious mottling virus (NIMV), and Hyuganatsu virus (HV), were tested in a convenient one-step RT-PCR assay. SDV was the most broadly detected using uSDVup/uSDVdo primers that specifically targeted a nucleotide sequence in the 3′-noncoding region that is conserved in both segmented RNAs 1 and 2 of SDV among the tested primers. Nucleotide sequence analysis confirmed that the amplified RT-PCR products could be derived from RNAs 1 or 2 of SDV variants, some of which had interesting genetic diversity.