A molecular technique for selection of self-compatible varieties of Japanese pear (Pyrus pyrifolia Nakai)

The pear cultivar ‘Osa-Nijisseiki’ (S₂S^sm ₄; sm = stylar-part mutant) has been used as a parent to breed self-compatible cultivars that produce excellent fruits. However, determination of the self-compatibility of ‘Osa-Nijisseiki’ offspring requires a lot of time, 6 years or more, by conventional cross breeding. We have designed a rapid reliable method for the identification of self-compatible varieties of ‘Osa-Nijisseiki’ offspring based on the polymerase chain reaction (PCR) and restriction fragment length polymorphism (RFLP) with S-allele specific restriction endonucleases. By using this method, 8 self-compatible varieties were selected among 16 selections resulting from a cross between the self-compatible cultivar ‘Osa-Nijisseiki’ (S₂S^sm ₄) and the self-incompatible cultivars ‘Niitaka’ (S₃S₉), ‘Whasan’ (S₃S₅), ‘Chuwhangbae’ (S₄S₆). The S-genotypes of 16 ‘Osa-Nijisseiki’ offsprings were also determined. This revised version was published online in August 2006 with corrections to the Cover Date.     

Hardness distribution on wood surface

For better understanding wood hardness, we developed a new hand-operated hardness tester that works with Brinell's method. With this tester we investigated the hardness distribution of wood minutely using a 2mm diameter ball tip. The following results were obtained: (1) On preliminary examination with medium-density fiberboard, we found that the value of Brinell's hardness decreased with the increase in the tip ball's diameter but that it was almost constant with the indenting velocity. (2) By using a small diameter tip, the difference of the hardness became clearer between earlywood and latewood. (3) With radial and tangential sections, we obtained hardness distribution patterns similar to those of wood grain. It seems that the hardness distribution reflects the distribution of density on wood surfaces.     

Effects of management, environment and landscape conditions on establishment of hardwood seedlings and saplings in central Japanese coniferous plantations

There is an increasing need to restore natural hardwood forests in landscapes dominated by monocultural conifer plantations. A convenient restoration approach is to exploit natural regeneration processes. Natural regeneration, however, is affected by diverse interacting factors, for which better understanding is required, in order to optimize restoration programs. To identify optimal management practices for improving natural regeneration of hardwood trees in coniferous plantations, we examined the effects of multiple factors on the abundance of seedlings, small saplings and large saplings (height <0.3, 0.3-1.3 and ?1.3 m, respectively) of hardwood tree and shrub species in both line thinned (LT) and unthinned (UT) plantations of sugi (Cryptomeria japonica) and hardwood forests (HF) in central Japan. The effects of management practices (number of the times of weeding and cleaning, thinning method, years after thinning and forest age), environment (slope position, slope angle and canopy openness), and landscape conditions (distance from nearest hardwood forest, altitude and landuse before planting) on the number of hardwood individuals were examined by using the data obtained from the LT plantations. We also compared hardwood density between LT and UT plantations to examine the effect of line thinning. Finally, we examined species composition of LT plantations and HF to identify hardwood forest components in the thinned plantations. The effects on hardwood regeneration of environmental conditions, landscape factors and management practices applied in the plantations varied, depending on the size class and life form of the regenerating species. The abundance of large saplings of tall tree species was affected by several management factors, especially number of the times of weeding. Landscape conditions (distance from the nearest hardwood forest and altitude) affected the abundance of small saplings and seedlings of tall tree species, but not the other classes. Seedlings and small saplings of many tall tree species that contribute to hardwood forest canopies were less abundant in the LT plantations. The results show that numerous factors affect the establishment and abundance of naturally regenerating hardwood tree species, and suggest that successful establishment during early plantation stages can have long-lasting effects on natural regeneration of tall tree species.     

Characteristics of Raindrop Acidification by Co-Washout of SO2(G)-H2O2(G)-HNO3(G)

In order to investigate the acid rain formation under the coexistence of SO₂(g), H₂O₂(g), and HNO₃(g) in the air, a mathematical model has been built and some numerical simulations have been carried out with use of the model. The simulation reveals that SO₂(g) absorbed into a raindrop is released and then re-absorbed as the fall distance increases. The desorption and re-absorption processes of SO₂(g) are caused by: (1) the fact that the equilibrium concentration of H₂O₂(aq) and HNO₃(aq) in raindrops are much higher than that of SO₂(aq), and (2) the fact that the oxidation reaction rate of HSO₃ ^? with H₂O₂(aq) increases with H⁺ concentration in raindrops. The degree of acidification of the rainwater has been estimated by introducing a raindrop size distribution. The acidification is mainly caused by the adsorption of SO₂(g) in the usual case where the atmospheric concentration of SO₂(g) is much higher than that of HNO₃(g). With the increase in the atmospheric concentration of HNO₃(g), the concentration of H⁺ generated from SO₂(g) decreases and the contribution of HNO₃(g) to the generation of H⁺ becomes dominant.

     

Methane emissions from different vegetation zones in a Qinghai-Tibetan Plateau wetland

We measured methane (CH₄) emissions in the Luanhaizi wetland, a typical alpine wetland on the Qinghai-Tibetan Plateau, China, during the plant growth season (early July to mid-September) in 2002. Our aim was to quantify the spatial and temporal variation of CH₄ flux and to elucidate key factors in this variation. Static chamber measurements of CH₄ flux were made in four vegetation zones along a gradient of water depth. There were three emergent-plant zones (Hippuris-dominated; Scirpus-dominated; and Carex-dominated) and one submerged-plant zone (Potamogeton-dominated). The smallest CH₄ flux (seasonal mean=33.1 mg CH₄ m⁻² d⁻¹) was observed in the Potamogeton-dominated zone, which occupied about 74% of the total area of the wetland. The greatest CH₄ flux (seasonal mean=214 mg CH₄ m⁻² d⁻¹) was observed in the Hippuris-dominated zone, in the second-deepest water area. CH₄ flux from three zones (excluding the Carex-dominated zone) showed a marked diurnal change and decreased dramatically under dark conditions. Light intensity had a major influence on the temporal variation in CH₄ flux, at least in three of the zones. Methane fluxes from all zones increased during the growing season with increasing aboveground biomass. CH₄ flux from the Scirpus-dominated zone was significantly lower than in the other emergent-plant zones despite the large biomass, because the root and rhizome intake ports for CH₄ transport in the dominant species were distributed in shallower and more oxidative soil than occupied in the other zones. Spatial and temporal variation in CH₄ flux from the alpine wetland was determined by the vegetation zone. Among the dominant species in each zone, there were variations in the density and biomass of shoots, gas-transport system, and root-rhizome architecture. The CH₄ flux from a typical alpine wetland on the Qinghai-Tibetan Plateau was as high as those of other boreal and alpine wetlands.     

Airborne laser scanning in forest management: Individual tree identification and laser pulse penetration in a stand with different levels of thinning

This study examined the ability of an airborne laser scanner to identify individual trees in the canopy of a Chamaecyparis obtusa stand and investigated the relationship between the penetration rate of the laser pulses and stand attributes under different canopy conditions caused by different levels of thinning. Individual tree crowns were identified from a digital canopy model (DCM) derived from airborne laser scanner data by the watershed segmentation method. The identification rate of individual trees in blocks with heavy thinning (ratio of the basal area of the felled trees to the total basal area, hereinafter thinning ratio of the basal area, 38.0%), moderate thinning (30.4%), and no thinning was 95.3%, 89.2%, and 60.0%, respectively. Individual tree heights were estimated from the DCM values by local maximum filtering within identified individual crowns. Tree height in the three blocks was estimated with a root-mean-square error of 0.95, 0.65, and 0.68 m, respectively. Tree heights determined in a field survey were regressed against those estimated from the DCM, yielding coefficients of determination (r²) of 0.71, 0.87, and 0.85, respectively, for the blocks with heavy thinning, moderate thinning, and no thinning, respectively, and 0.86 overall. The respective penetration rates of the laser pulses through the canopy to the ground were 50.6%, 43.1%, and 9.2%. Regression of the laser pulse penetration rate against the thinning ratio of the basal area and against the total basal area of the remaining trees in 25 quadrats established in the blocks, yielded r² values of 0.89 and 0.74, respectively.     

Effects of patch cutting on leaf nitrogen nutrition in hinoki cypress (Chamaecyparis obtusa Endlicher) at different elevations along a slope in Japan

Leaf nitrogen nutrition of hinoki cypress (Chamaecyparis obtusa Endlicher) was investigated at three positions along a slope over a period of 3 years. At each slope position, nitrogen properties were compared in patch-cut plots (0.06–0.09 ha) and uncut control plots (0.04 ha). Nitrogen cycling at the lower slope was characterized by a higher rate of soil nitrogen mineralization, and higher nitrogen concentration in fresh leaves and leaf-litter. The soil nitrogen mineralization rate and fresh-leaf nitrogen concentration in the patch-cut plots were higher than those in the control plots. However, leaf-litter nitrogen concentration did not differ between the patch-cut and control plots. The results suggest that slope position strongly affects leaf nitrogen nutrition of hinoki cypress and soil nitrogen availability. By contrast, patch cutting does not affect leaf-litter nitrogen concentration. These findings indicated that hinoki cypress would not enhance forest nitrogen cycling through changes in leaf-litter nitrogen concentration after patch cutting.     

Control of seed-borne pathogens on legumes by microbial and other alternative seed treatments

Greenhouse trials were carried out in order to test the efficacy of different seed treatments as alternatives to chemicals against Colletotrichum lindemuthianum cause of anthracnose on bean and Ascochyta spp. cause of Ascochyta blights on pea, respectively. Resistance inducers, commercially formulated microorganisms, non-formulated selected strains of different microorganisms (fungi, bacteria and yeasts) and plant extracts were applied as dry or liquid seed treatments on naturally infested seeds. Seedling emergence and disease incidence and/or severity were recorded. Almost all seed treatments turned out to be ineffective in controlling the Ascochyta infections, which is in line with the literature stating that these pathogens are difficult to control. The only alternative treatments that gave some control of Ascochyta spp. were thyme oil and a strain of Clonostachys rosea. The resistance inducers tested successfully controlled infections of bean by C. lindemuthianum. Among the formulated microorganisms, Bacillus subtilis-based formulations provided the best protection from anthracnose. Some strains of Pseudomonas putida, a disease-suppressive, saprophytic strain of Fusarium oxysporum and the mustard powder-based product Tillecur also proved to be effective against bean anthracnose. However, among the resistance inducers as well as among the other groups, certain agents caused a significant reduction of plant emergence. Different alternative seed treatments can therefore be used for the control of C. lindemuthianum on bean, while on pea only thyme oil and a strain of Clonostachys rosea showed some effectiveness against Ascochyta spp.