Plant species identification using fecal DNAs from red-eared slider and Reeves’ pond turtle in agricultural canals for rural ecosystem conservation

Fecal DNA samples from the red-eared slider and Reeves’ pond turtle, suspected pests of lotus root paddies, were used to identify the plant species eaten by these turtles in order to develop a strategy for rural ecosystem conservation. The fecal samples were obtained from young and adult individuals (mostly female) of both species living in agricultural canals surrounding lotus root paddies in Tokushima Prefecture, Japan. The samples were screened for the presence or absence of DNA from nine plant species using PCR and plant species-specific primers for the rbcL gene of chloroplast DNA. In the red-eared slider, our analysis identified seven plant species in the fecal DNA samples of adults and three plant species in those of young individuals. In Reeves’ pond turtle, our analysis identified two plant species from adult fecal samples and one species from those of young individuals. Thus, adult red-eared sliders consume a greater range of plants than young red-eared sliders or Reeves’ pond turtles. Both turtle species, independently of age, consumed lotus plants and were likely to cause feeding damage to lotus roots. Considering the plant species detected in adult red-eared sliders and these plant habitats, we suggest that this adult turtle is likely to travel between the agricultural canals and the lotus root paddies. These findings will help the development of strategies for preventing damage to lotus roots by these turtles; furthermore, they indicate that fecal DNA analysis will be applicable to investigation of the feeding habits of other animal species.     

Evaluation of Intestinal Absorption of Dietary Halocynthiaxanthin,a Carotenoid from the Sea Squirt Halocynthia roretzi

Halocynthiaxanthin is an acetylenic carotenoid mainly found in Halocynthia roretzi. To date, several bioactivities of halocynthiaxanthin have been reported, but its mechanism of digestion and absorption in mammals has not been studied yet. In this study, we evaluated the intestinal absorption of halocynthiaxanthin in mice. The halocynthiaxanthin-rich fraction was prepared from the tunicate Halocynthia roretzi. Mice were orally administered the fraction at a dose of 5 mg/kg body weight. The halocynthiaxanthin levels in the plasma, liver, and small intestine, were quantified using HPLC-PDA, 1, 3, 6, and 9 h after ingestion. The halocynthiaxanthin-rich fraction mainly consisted of the all-trans form and a small amount of cis forms. These three isomers were detected in the plasma of mice 3 h after ingestion. Time-course changes after the ingestion of this fraction were found, with cis isomers being more abundant than the all-trans isomer in the mouse plasma and liver. In the small intestine, however, the all-trans isomer was primarily detected. The possibility that cis isomers might be absorbed rapidly from the small intestine cannot be denied, but our results suggest that dietary all-trans-halocynthiaxanthin might be isomerized to the cis isomer after intestinal absorption.     

Plywood frame corner joints with glued-in hardwood dowels

This paper presents research on plywood frame corners jointed to glulam beams and columns by means of glued-in hardwood dowels. The frame corner was made of a solid block of ordinary plywood of the same width as the glulam beams and with plies parallel to the plane of the frame to avoid splitting due to stress perpendicular to the grain. Hardwood dowels with a diameter of 12mm and a maximum glued-in length of 120mm were glued into drilled holes in the plywood corner and glulam beam ends parallel to the grain direction of the beams to form a momentresisting joint. Static bending tests were conducted of frame corners with 100 X 200mm² and 120 X 420mm² beam cross sections. Bending capacities of the joints corresponding to a modulus of rupture of the jointed glulam beams of about 30MPa were obtained for both closing and opening moments for the small cross sections, and about 22MPa was obtained for the large cross sections. Simple design models for calculation of joint strength and rotational stiffness are also presented.     

Automatic detection of washboarding in bandsaws

This paper presents an on-line method for detecting washboarding generated in bandsaws. It uses a parameter based on the shape of sawing force amplitude distributions. The curve of the probability density function of the parallel sawing force amplitude obeyed a normal distribution for the normal sawn surface, but it changed to an M-shaped distribution when washboarding appeared on the sawn surface of the workpiece. The curve of probability density function of the normal sawing force amplitude obeyed the normal distribution for any sawn surface investigated. The workpiece including a knot did not influence use of the parameter for detecting the appearance of washboarding.     

High-speed steel tool wear during wood cutting in the presence of high-temperature corrosion and mineral contamination

Dulling of high-speed steel (HSS) cutting tools after milling five wood species has been analyzed. The wood investigated varied in mineral contamination, high-temperature corrosivity (HTC) and density (D). Experiments performed proved that up to date methods for evaluation of mineral contamination in wood should be improved. A new pipe-like form of mineral contamination particles was evidenced. The correlation between the presence of 3D aggregates of silica in wood and high content of K and Ca in the ash was established. Employing multivariable theoretical simulation method, the combined effect of mineral contamination, HTC and wood density on the tool dullness appeared to be a reasonable explanation of the results obtained.     

Mathematical Simulation of Small Log Ripped by Slasher Saw

Withthesmallsawlogwidespreadused,theuncut-boardsandslabsarecutbythemulti-bitrippingedgerinthejhoberindustw.AfersawingripPed,theunedgedboedaccuratelyvolumeisfAnotherparametCrsaredefinitebyadrawing,theaPProimatevolumeforn1ulateofunedgedboardistx,y,~inatC,x'…     

Compressive and tensile properties of a butt-jointed lamination model

A study was undertaken to evaluate the effect of glue application and placement of butt-joints on the compressive and tensile properties in a butt-jointed lamination. The aim was to provide background information for producing butt-jointed, glued, laminated timber. Three butt-jointed lamination models were prepared from spruce-pine-fir (S-P-F) dimension lumber with glued and nonglued butt joints, with different placements of the butt joints in the models. The axial stiffness and strength properties were assessed using both compressive and tensile tests. The results of the study indicated that for the compressive lamination model the application of glue at the butt joint gave more stiffness than the nonglued butt joint. Neither glue application nor placement of the joint had a statistically significant effect on the compressive strength. There were no significant differences between the glued and nonglued butt joint for either tensile strength or stiffness.     

Effect of tool angles on the chips generated during milling of wood by straight router-bits

 The effect of tool angles on the shapes of chips generated by parallel-to-grain and end-grain milling was explored for China fir and maple under fixed spindle and feed speeds and cutting depth. The milling path was up-milling by straight router-bits with a diameter of 12 mm. The chip shapes could be distinguished as five types: spiral, splinter, flow, thin, and granules or powder. The flow and thin chips were generated most often (on a weight percentage basis) for all tool angles investigated for parallel-to-grain and end-grain milling of China fir and maple. More granule chips were produced with parallel-to-grain milling than with end-grain milling for both woods. The measured chip thickness (t′) was thicker than the calculated thickness (t _max). Thicker and longer maple chips were produced by end-grain milling than by parallel-to-grain milling. The tool geometries of 40°/15° (sharpness of the angle–rake angle), 50°/15°, and 60°/15° for China fir and 40°/25°, 50°/5°, and 60°/5° for maple produced relatively more flow chips with parallel-to-grain milling. Furthermore, the tool geometries of 40°/5°, 50°/15° and 60°/25° produced more flow chips (weight percentage) by end-grain milling of China fir and maple. Received: May 23, 2001 / Accepted: June 28, 2002 Acknowledgment This study was supported by a grant from the National Council of Science, Taiwan (NSC89-2313-B-415-011).     

Locating and identifying sound knots and dead knots on sugi by the rule-based color vision system

Knowledge of the occurrence of sound and dead knots on the surface of sugi is important for the classification and application of the material. This study examined a color vision system for detecting sound and dead knots on sugi. The system can be conceptually divided into three components: a CCD-camera scanning system, an image-segmenting module, and a rule-based defect identifying module. The results showed that the potential defect regions could be located by Otsus threshold algorithm in conjunction with t-test analysis. The accuracies of locating sound knots and dead knots were 92.6% and 97.1%, respectively. The rule-based approach was used to identify sound and dead knots and the identifying accuracies for sound knots and dead knots were 92.0% and 94.1%, respectively. The overall detection accuracy of the system was 87.6%. The results indicated that the rule-based color vision system is an efficient means of detecting sound knots and dead knots on sugi.     

Nondestructive measurement of cross-sectional shape of a tree trunk

To evaluate windthrow resistance with respect to stem breakage, a nondestructive method for determining the shape of trunk cross sections was developed. In this method, the coordinates of multiple gauge points set on the perimeter of a trunk are calculated by measuring the distances between them. The shape between the gauge points is generated with the use of a profile gauge placed between them. Measurement tests were conducted using profile gauges with lengths of 300 and 900 mm on model specimens with four shape patterns and four different diameters. The accuracy of the estimation was verified by comparing the section modulus calculated for the generated image and for the photograph. The average ratio of section modulus (generated/photo) for all specimens was 0.994, which indicates that the proposed method is highly accurate. The section moduli of hollow trunks can be evaluated using the profile method together with the drill resistance technique on the condition that 26% of the trunk diameter could be drilled without skew.