TCD燃烧系统对柴油机燃烧和排放性能改善效果的试验研究

为探究道依茨TCD2015柴油机上配备的导流燃烧系统(简称TCD燃烧系统,T表示涡轮增压器,Turbocharger,C表示进气中冷,Charge air cooling,D为柴油颗粒捕集器,Diesel particle filter)对改善柴油机燃烧性能和降低污染物排放的效果,采用单缸机试验对TCD燃烧系统在不同转速、负荷和过量空气系数下的燃烧和排放性能进行研究。试验结果表明不同工况下TCD燃烧系统燃油消耗率和Soot排放量均低于传统ω燃烧系统,燃油消耗率最大降幅为7.01%,Soot排放量最大降幅为86.67%,且低过量空气系数(1.2～1.6)下TCD燃烧系统仍具有较好的性能。为揭示TCD燃烧系统改善油气混合促进燃烧的机理,采用AVL Fire软件建立了柴油机性能仿真模型。计算结果表明,TCD燃烧系统的环状凸起结构将燃油导向内外两室,从而促进了缸内燃油发展过程,燃油当量比大于4的浓混合气区域燃油质量比例相比ω燃烧系统降幅最大为9.75%,活塞下移时TCD燃烧系统内油束撞击浅盘侧壁形成撞壁射流扩大了燃油扩散面积,从而改善了缸内油气混合质量,燃油当量比小于1的均匀混合气区域燃油质量比例相比ω燃烧系统降幅最大为7.45%,因此TCD燃烧系统能够有效改善柴油机的燃烧和排放性能,可应用于柴油机高负荷和低过量空气系数工况综合性能提升。研究结果可为柴油机燃烧系统开发和改进提供参考。     

不同种植密度对机采辣椒品种性状和产量的影响

为明确不同种植密度对机采辣椒品种性状、产量的影响,以适宜机采的辣椒‘辣研102’为研究对象,设置4个种植密度（P0:38 480株/hm²、P1:51 307株/hm²、P2:76 961株/hm²、P3:102 615株/hm²）,分别于贵阳、遵义两地开展田间小区试验。结果表明,随着种植密度的增加,辣椒株高呈增加趋势,茎粗呈下降趋势。辣椒根部、地上部生物量均在高密植条件下（P3）时达到最小。辣椒的发病率与病情指数均随种植密度的增加而显著提高,高密植处理条件下（P3）达到最大,发病率分别为41.67%（贵阳）、43.33%（遵义）,病情指数分别为31.05%（贵阳）、29.86%（遵义）。过高的种植密度导致单株辣椒光合作用大幅下降:P1、P2、P3处理条件下光合速率分别较P0处理显著降低13.94%、24.73%、29.66%（遵义）;P1、P2、P3处理条件下辣椒叶片蒸腾速率较P0降低10.02%、19.81%、42.12%（贵阳）。辣椒总产量随种植密度增加而显著提高,而商品果产量随种植密度的增加呈先增加后降低的趋势。商品果产量在P1条件下获得最大值,相对于P0、P2、P3贵阳辣椒商品果产量显著提高了16.43%、32.81%、41.67%,遵义提高了20.25%、26.67%、61.02%。综合辣椒生长与商品果产量,贵州机采辣椒‘辣研102’最佳种植密度为51307株/hm²。     

黑胫病菌（Leptosphaeria biglobosa）在油菜叶片和茎中的侵染过程观察

为明确黑胫病菌（Leptosphaeria biglobosa）在甘蓝型油菜叶片和茎中的侵染及扩展过程，利用绿色荧光蛋 白（GFP）标记的黑胫病菌株接菌油菜叶片，利用激光共聚焦显微镜观察菌株在油菜叶片和茎中的侵染过程。结果 表明，接种油菜叶片7 h后，分生孢子萌发并长出芽管；17 h后，芽管侵入气孔；24 h后，分生孢子全部萌发；36 h后萌 发的芽管形成菌丝；120 h后，菌丝在叶片表皮细胞间隙蔓延，并侵入叶肉细胞。13 d后，菌丝侵入茎部皮层组织； 15 d后，菌丝在皮层细胞间隙蔓延，并侵染至茎表皮；21 d后，菌丝侵染至维管组织；23 d后，菌丝侵染至茎韧皮部； 25 d后，茎导管被侵染，并向木质部扩展。本研究发现的L. biglobosa 在油菜叶片和茎中的侵染过程，可为油菜与黑 胫病菌互作的研究、黑胫病致病机理及防治提供参考。     

Effects of three methionine sources in diets on temporal B0AT1 and ASCT2 mRNA expression in different intestinal segments of cobia,Rachycentron canadum

A 4‐week feeding trial was conducted using five groups of hybrid grouper (61.15 ± 0.15 g) to explore the potential effects of three methionine (Met) sources. Five isonitrogenous and isolipidic diets were formulated that included a fishmeal (FM) diet; nonsupplemented (NS) diet; or NS diets with the addition of the L‐methionine (L‐Met), DL‐methionine (DL‐Met), or coated Met (Co‐Met) to obtain the same Met level as the FM diet. Fish were randomly distributed into sea cages (30 fish per cage). Weight gain and specific growth rate in the DL‐Met group and FM group were significantly higher than those in all other groups (p < .05). In the proximal and distal intestines, of the 20 gene and time combinations (10 per gene), there were 14 combinations (70%) in which there were no significant differences in gene expression levels between the FM and DL‐Met groups (p > .05). The main reason for the same growth effect between the DL‐Met and FM groups may be attributed to the synchronized absorption at most time points after feeding, which had similar expression patterns of B⁰AT1 and ASCT2 of the proximal and distal intestines between two groups.     

Impact of climate change on maize yield in China from 1979 to 2016

Climate change severely impacts agricultural production, which jeopardizes food security. China is the second largest maize producer in the world and also the largest consumer of maize. Analyzing the impact of climate change on maize yields can provide effective guidance to national and international economics and politics. Panel models are unable to determine the group-wise heteroscedasticity, cross-sectional correlation and autocorrelation of datasets, therefore we adopted the feasible generalized least square(FGLS) model to evaluate the impact of climate change on maize yields in China from 1979–2016 and got the following results:(1) During the 1979–2016 period, increases in temperature negatively impacted the maize yield of China. For every 1°C increase in temperature, the maize yield was reduced by 5.19 kg 667 m–2(1.7%). Precipitation increased only marginally during this time, and therefore its impact on the maize yield was negligible. For every 1 mm increase in precipitation, the maize yield increased by an insignificant amount of 0.043 kg 667 m–2(0.014%).(2) The impacts of climate change on maize yield differ spatially, with more significant impacts experienced in southern China. In this region, a 1°C increase in temperature resulted in a 7.49 kg 667 m–2 decrease in the maize yield, while the impact of temperature on the maize yield in northern China was insignificant. For every 1 mm increase in precipitation, the maize yield increased by 0.013 kg 667 m–2 in southern China and 0.066 kg 667 m–2 in northern China.(3) The resilience of the maize crop to climate change is strong. The marginal effect of temperature in both southern and northern China during the 1990–2016 period was smaller than that for the 1979–2016 period.     

漾濞县核桃古树资源开发利用现状

对漾濞核桃古树资源现状、资源特点、存在的问题及开发利用现状进行研究,并提出古树核桃开发利用建议,以期提升漾濞核桃古树资源的附加值,从而通过开发核桃古树资源带动核桃产业健康持续发展.     

"三团一队"定点扶贫模式的绩效、困境与优化路径 ——基于西北农林科技大学帮扶合阳县的考察

高校不仅担负教书育人的根本任务,其作为重要的社会力量,也承担着定点扶贫的责任与使命.高校在定点扶贫过程中,可以充分发挥科技、人才以及智力等独特优势.经过多年的不断探索,已有许多高校探索出定点扶贫的经典模式.基于西北农林科技大学"三团一队"定点扶贫模式在帮扶合阳县所取得的成效以及"三团一队"保障机制不健全、扶贫工作主要发力点不突出、多主体共同参与程度不够以及社会力量吸引不足的困境,探索优化路径,以此来完善"三团一队"定点扶贫模式.     

小麦4B染色体上LOX基因的等位变异及其区域分布

为了解中国不同麦区小麦种质资源籽粒脂肪氧化酶（lipoxygenase,LOX）活性相关基因TaLox-B1的差异和分布,利用小麦4B染色体上的功能标记LOX16和LOX18对7个麦区的436份种质资源进行分子检测。结果表明：在供试材料中共检测到3种TaLox-B1基因等位变异类型,分别为TaLox-B1a（与高LOX活性相关)、TaLox-B1b（与低LOX活性相关）和杂合型,其频率分别为19.0％、70.4％和10.6％。小麦LOX活性基因不同变异类型在各生态区的分布存在明显差异：基因型TaLox-B1a在黄淮冬麦区、北部冬麦区和长江中下游冬麦区分布较多,其比例分别为21.1%、19.8%和17.6%;基因型TaLox-B1b在西南冬麦区和长江中下游冬麦区分布较多,比例分别为87.9%、72.5%;杂合型仅存在于北部冬麦区、黄淮冬麦区与长江中下游冬麦区,比例分别为14.2%、12.4%和9.8%。利用标记LOX16和LOX18对53个自选高代品系进行分子检测,发现自选品系仅有TaLox-B1b与杂合型两种基因型,其中基因型TaLox-B1ab有32个,比例为60.4%。采用分子标记辅助选择,有利于快速鉴定小麦籽粒LOX活性,加速LOX的遗传改良和新品种选育。     

河南油田注聚井聚合物堵塞机理及防治技术

为解决河南油田聚合物驱油注聚井堵塞导致采收率严重下降的问题,采用物理模型试验及扫描电镜(SEM)的方法对堵塞位置、堵塞因素进行研究.聚合物注入性试验结果表明,注入阻力越大,注入压力就越高,确定堵塞位置为近井地带,结果与实际矿场结果相符;扫描电镜结果表明,高渗岩心以吸附堵塞为主,低渗岩心以机械捕集为主;静态吸附试验显示防吸附剂质量分数、聚合物相对分子质量、矿化度、温度均对聚合物吸附有不同程度影响,为此研制出一种使砂岩表面润湿反转以减少吸附的防吸附剂(代号5807),并对注入参数进行优化:防吸附剂最优注入质量分数为0.5％;该防吸附剂耐盐性较好,不同矿化度(1500～10000mg/L)对该防吸附剂体系的防吸附率影响不大;防吸附剂注入体积数越大,聚合物防吸附率越高,最佳注入体积为0.6PV;防吸附剂处理地层的时间越长,聚合物防吸附率越高,处理时间在12h以上防吸附率大于70％;防吸附剂的最佳注入方式为:顶替液+0.6 PV防吸附剂段塞+1PV清洗剂.该研究对油田后续现场施工及动态调整具有重要指导意义,同时也可为河南油田提高聚合物驱技术应用效果提供理论支持.