基于有限元的汽车扭臂热锻工艺研究

文章以汽车扭杆力臂为研究对象,通过DEFORM-3D有限元分析对汽车扭杆力臂热锻工艺过程进行模拟试验,分析了成形过程中的上模载荷情况、应力应变场分布情况和温度场的变化规律。以提高产品质量和降低载荷为主要目的,给出合理的热加工参数,分析结果能为类似锻件的热模锻工艺和模具设计提供依据。     

不同合成树脂工艺对改性材性能影响研究

为研究树脂对改性材性能的影响，采用2种不同工艺合成三聚氰胺-脲醛树脂（MUF），测试了树脂的相关性能。结果表明，不同合成工艺路线下制备的 MUF 树脂在固体含量、粘度、固化时间、游离甲醛含量间存在显著差异。最终树脂的分子结构类型相似性极高，但相同结构组分在不同树脂中所占比例各有差异。羟甲基基团在MUF2中所占比例高，而亚甲基桥键及醚键在MUF1中含量高。MUF1改性材的增重率（weight percent gain，WPG）值更大，但MUF2改性材的抗溶胀性（anti-swelling efficiency，ASE）和体积膨胀率（bulking rates，B）更高，MUF2改性材的尺寸稳定性更好。     

Intensive organic vegetable production increases soil organic carbon but with a lower carbon conversion efficiency than integrated management

Intensive vegetable production in greenhouses has rapidly expanded in China since the 1990s and increased to 1.3 million ha of farmland by 2016, which is the highest in the world. We conducted an 11‐year greenhouse vegetable production experiment from 2002 to 2013 to observe soil organic carbon (SOC) dynamics under three management systems, i.e., conventional (CON), integrated (ING), and intensive organic (ORG) farming. Soil samples (0–20 and 20–40 cm depth) were collected in 2002 and 2013 and separated into four particle‐size fractions, i.e., coarse sand (> 250 µm), fine sand (250–53 µm), silt (53–2 µm), and clay (< 2 µm). The SOC contents and δ¹³C values of the whole soil and the four particle‐size fractions were analyzed. After 11 years of vegetable farming, ORG and ING significantly increased SOC stocks (0–20 cm) by 4008 ± 36.6 and 2880 ± 365 kg C ha^?1 y^?1, respectively, 8.1‐ and 5.8‐times that of CON (494 ± 42.6 kg C ha^?1 y^?1). The SOC stock increase in ORG at 20–40 cm depth was 245 ± 66.4 kg C ha^?1 y^?1, significantly higher than in ING (66 ± 13.4 kg C ha^?1 y^?1) and CON (109 ± 44.8 kg C ha^?1 y^?1). Analyses of ¹³C revealed a significant increase in newly produced SOC in both soil layers in ORG. However, the carbon conversion efficiency (CE: increased organic carbon in soil divided by organic carbon input) was lower in ORG (14.4%–21.7%) than in ING (18.2%–27.4%). Among the four particle‐sizes in the 0–20 cm layer, the silt fraction exhibited the largest proportion of increase in SOC content (57.8% and 55.4% of the SOC increase in ORG and ING, respectively). A similar trend was detected in the 20–40 cm soil layer. Over all, intensive organic (ORG) vegetable production increases soil organic carbon but with a lower carbon conversion efficiency than integrated (ING) management.     

Effects of apelin-13 on oxidative stress induced by high uric acid in adipocytes

AIM: To study the effects of apelin-13 on oxidative stress induced by high uric acid in 3T3-L1 adipocytes and its underlying mechanisms. METHODS: 3T3-L1 adipocytes were stimulated with uric acid at 10 mg/dL for 48 h. Some of the adipocytes were administered with 1 μmol/L apelin-13 in the presence of uric acid at 10 mg/dL. The adipocytes stimulated with 100 μmol/L H₂O₂ were served as positive controls. The intracellular reactive oxygen species (ROS) concentrations were detected by flow cytometry. The biochemical kits were used to measure the activities of superotide dismutase (SOD), glutathione peroxidase (GSH-Px), catalase (CAT) and NADPH oxidase (NOX) activity, and the content of malondialdehyde (MDA) in the cell lysate and the supernatant. The mRNA levels of renin-angiotensin system (RAS) components, including angiotensinogen (AGT), angiotensin-converting enzyrne1 (ACE1), angiotensin II type 1 receptor (AT1R) and AT2R, as well as angiotensin II receptor -like 1 (APJ) were measured by real-time PCR. The concentrations of angiotensin II (AngⅡ) in the cell lysate and the supernatant were measured by ELISA. RESULTS: Adipocytes stimulated with uric acid at 10 mg/dL had lower activities of antioxidant enzymes (SOD, GSH-PX and CAT) and higher levels of NOX activity and MDA content (P < 0.05). Accordingly, the intracellular ROS levels were found to be dramatically increased. However, apelin-13 administration attenuated uric acid-induced oxidative stress in the 3T3-L1 adipocytes. Uric acid at 10 mg/dL upregulated the mRNA expression of local RAS, enhanced AngⅡ concentrations both in the cell lysate and the supernatant, and down-regulated the mRNA level of APJ in the adipocytes (P < 0.05). Conversely, apelin-13 partially reversed these parameters. CONCLUSION: Apelin-13 attenuates oxidative stress induced by uric acid, may be via down-regulation of local RAS expression in the 3T3-L1 adipocytes.     

大豆RING/U-box蛋白Glyma.13G115900的克隆及其对非生物胁迫的应答

课题组前期对干旱胁迫下大豆转录组的数据分析发现大豆Glyma.13G115900基因编码一个RING/U-box蛋白,其表达水平受干旱胁迫影响显著。本研究以垦丰16大豆为试验材料,克隆Glyma.13G115900基因。氨基酸多重序列比对表明其编码的蛋白与其它物种都具有高度保守的RING/U-box结构域。构建原核表达载体pET-29b-Glyma.13G115900转化到大肠杆菌中,Glyma.13G115900蛋白在大肠杆菌中能够表达。荧光定量PCR分析表明Glyma.13G115900基因的表达量受PEG、NaCl和ABA的影响显著,但基本不受冷胁迫的诱导。经PEG和NaCl处理后,该基因表达量与CK相比呈现出显著下降的趋势,PEG处理的表达量变化比NaCl下调的更明显;在ABA诱导下与CK相比该基因的mRNA丰度呈现出先上升后下降的趋势,在4 h表达量出现峰值,推测该基因可能通过依赖于ABA途径参与非生物胁迫应答。以上结果为进一步深入研究该基因的调控途径奠定基础。     

民勤4种主要灌木植物δ13C季节变化及与气象因子的关系

对民勤4种主要灌木植物叶片/同化枝δ¹³C测定，研究不同荒漠灌木植物叶片/同化枝δ¹³C差异及其季节变化，并探讨植物叶片/同化枝δ¹³C与气象因子之间的关系。结果表明:1）4种灌木植物叶片/同化枝δ¹³C值不同月份之间存在极显著差异（P＜0.01），除梭梭外，其他3种植物δ¹³C值生长初期（5月）>生长中后期（6-10月）。4 种灌木植物叶片/同化枝δ¹³C值种间差异在5-10月都达到极显著水平（P＜0.01），沙拐枣＞梭梭＞柠条锦鸡儿＞白刺。2）4种主要灌木植物叶片/同化枝δ¹³C值受到物种、月份、物种×月份的影响，均达到极显著水平(P＜0.01)，但受物种的影响最大。3）4种灌木植物叶片/同化枝δ¹³C值与气象因子的关系因其物种而异；影响梭梭、沙拐枣、白刺、柠条锦鸡儿叶片/同化枝δ¹³C值的主要气象因子分别是平均气温、相对湿度、蒸发量。     

增密减氮对弱筋小麦‘宁麦13’产量和品质的影响

为实现弱筋小麦优质稳产,解决当前弱筋小麦存在品质稳定性差的问题。本试验以弱筋小麦‘宁麦13’为试材,结合方差分析等方法研究增密减氮对弱筋小麦的产量、群体质量指标以及籽粒品质的影响。结果表明,在240 kg/hm²施氮水平条件下,随着密度的增加,小麦LAI、干物质积累量均呈先增加后下降的趋势,密度超过240×10⁴/hm²会导致LAI、干物质积累量、产量下降。在240×10⁴/hm²密度条件下,施氮量超过240 kg/hm²会导致小麦叶面积指数、SPAD值、花后干物质积累量和产量下降。适当的增密减氮有利于提高弱筋小麦的优质稳产,而过量增密减氮则会导致小麦产量下降,品质不稳定。为实现产量和品质的最优化,生产上推荐采用种植密度为240×10⁴/hm²,施氮量为180 kg/hm²,氮肥运筹为7:1:2:0的栽培模式。     

兽药二维码印刷及识读效率的研究

从国家兽药产品追溯系统中兽药二维码着手,针对兽药二维码印刷及识读效率方面的问题,对兽药二维码印刷方式、规格以及编码方式进行了分析与研究,提出了编码规则选择的依据、印刷规格的建议及其与识读效率间的关系,以期为兽药生产企业在实际应用中提高兽药二维码识读效率提供参考。