碎甘薯秧离散元仿真参数测量与标定*

针对甘薯秧蔓机械化回收过程中离散元仿真研究缺乏准确参数值的问题,采用直接测量和虚拟标定相结合的方法对碎甘薯茎秆和叶片离散元仿真参数进行研究。采用物理试验法获得碎甘薯秧的本征参数、碰撞恢复系数等参数值及碎甘薯秧颗粒的静摩擦系数参数范围,并为离散元法仿真设计了不同的参数组合。通过堆积角优化仿真试验确定甘薯叶片本征参数及其他不易直接测量的离散元仿真参数。Plackett-Burman试验表明,甘薯茎秆—甘薯茎秆和甘薯茎秆—45钢的静摩擦系数、甘薯茎秆—甘薯茎秆和甘薯茎秆—甘薯叶的滚动摩擦系数均显著影响堆积角。运用最陡爬坡试验和Box-Behnken优化试验标定了对碎甘薯秧堆积角有显著影响的参数值,以得到的参数进行颗粒堆积仿真试验,测得堆积角平均值为40.51°,与实测值相对误差为0.972%,说明物理试验加优化仿真试验来标定离散元参数是可行的,标定所得的参数可作为甘薯秧茎叶离散元仿真参数。     

基于有限元的汽车扭臂热锻工艺研究

文章以汽车扭杆力臂为研究对象,通过DEFORM-3D有限元分析对汽车扭杆力臂热锻工艺过程进行模拟试验,分析了成形过程中的上模载荷情况、应力应变场分布情况和温度场的变化规律。以提高产品质量和降低载荷为主要目的,给出合理的热加工参数,分析结果能为类似锻件的热模锻工艺和模具设计提供依据。     

全豆豆浆与传统豆浆感官品质和营养成分对比

以大豆为原料,通过感官评定对胶体磨技术自制的全豆豆浆和一般机械磨加工的传统豆浆中的永和豆浆和普通豆浆的感官品质进行了比较,通过营养成分检测对全豆豆浆和永和豆浆的营养成分进行了比较,同时将检测的全豆豆浆营养成分与中国食物成分表中的普通豆浆的营养成分进行比较。结果表明:全豆豆浆口感浓厚,细腻爽滑,豆香味浓郁,无豆腥味,感官评价总得分高于传统豆浆中的永和豆浆和普通豆浆,差异有统计学意义(P0.01);全豆豆浆中蛋白质、脂肪、总膳食纤维、维生素B1、维生素B2、钙、磷脂及大豆异黄酮等营养成分含量均高于永和豆浆,更高于普通豆浆。全豆豆浆的普及不仅可以提高豆浆的营养价值,还可以减少资源的浪费,具有一定的社会和经济效益。     

Detect unique molecular structure associated with physiochemical properties in CDC varieties of oat grain with unique nutrient traits [Feed Type vs. Milling Type] in comparison with barley grain using advanced molecular spectroscopy as a non-destructive biological tool

The objective of this study was to determinate grain unique protein inherent molecular structure that are related physiochemical and nutrient profiles in CDC developed oat varieties [CDC Nasser (Feed Type) and CDC Seabiscuit (Milling Type)] grown in cool climate condition in western Canada in comparison with conventional barley variety of CDC Meredith as a control using advanced molecular spectroscopy. Multivariate analyses, including an agglomerative hierarchical cluster analysis (CLA) and principal component analysis (PCA), were performed to identify protein molecular structural differences among the grains. The results revealed that CDC Seabiscuit contained greater (P < 0.05) protein structural Amide I and II than CDC Nasser and CDC Meredith, while the greater (P < 0.005) structural Amide I to II area and height ratios was detected in CDC Meredith. New oat grains had greater (P < 0.05) β-sheet height than barley grains, however, there was no difference in α-helix to β-sheet ratio values among the varieties. In conclusion, CDC Nasser and CDC Meredith had no difference in protein molecular structural features, while CDC Seabiscuit contains different protein structural characteristics as compared to CDC Meredith grain. The molecular structure features are highly associated with physiochemical and nutrient profiles in grains, which indicate that it also affect nutrient utilization and availability.     

心尖锚的力学分析

设计了一种六齿镍钛合金锚钩用于封堵器等二尖瓣、三尖瓣返流修复系统的心尖固定,并对其力学特性进行研究.通过分析心脏结构及解剖数据,确定锚钩形状和可控尺寸设计变量,利用Solidworks建立锚钩3D模型,运用Abaqus软件对23个不同尺寸锚钩模型的入鞘过程进行有限元计算,分析锚钩入鞘过程中的最大入鞘力、最大冯米塞斯应变和入鞘轨迹的影响因素.制作了一种规格锚钩实物,与计算结果进行对比分析.结果表明:鞘部长度、鞘部角度及齿宽对应力、应变的影响最大,可以通过减小鞘部长度、鞘部角度及齿宽,有效降低最大应力、应变值;厚度、曲率半径及齿宽对入鞘力起到决定性作用,而根长和角度对入鞘力的影响很小;轴向刺入深度主要通过控制鞘部长度及鞘部角度来定义,径向刺入深度则由曲率半径的大小所决定.研究可为需心尖固定的心脏介入产品设计提供一定的借鉴意义.     

Source of mycorrhizal inoculum influences growth of Faidherbia albida seedlings

Poor land use management and practice inhibit the growth and establishment of tree seedlings in dryland areas.We assessed arbuscular mycorrhizal fungi(AM)status of Faidherbia albida(Del.)A.Chev.trees grown on different land uses.We quantified the growth and nutrient uptake of F.albida seedlings inoculated with AM from different sources.These efforts were based on soil and fine root samples from the rhizosphere soils of F.albida trees.AM root colonization was determined using the gridline intersect method.Spores were extracted by the wet sieving and decanting method and identified to genus level.The seedling experiment had a completely randomized onefactorial design with four treatments and five replications.Faidherbida albida seedlings were grown in a greenhouse.All in situ F.albida trees were colonized by AM fungi.AM root colonization of F.albida trees was significantly higher(P<0.0086)in area exclosures than on lands used for grazing or cultivation.Spore abundance was significantly higher(P<0.0014)in area exclosures followed by cultivated land and grazing land.Glomus was the dominant genus in all land-uses.AM-inoculated F.albida seedlings grew better(P<0.05)than non-inoculated controls.Seedlings inoculated with AM from area exclosure had significantly(P<0.05)higher growth and nutrient uptake than those inoculated with AM from grazing and cultivated land.This emphasizes the importance of the native soil AM potential for better establishment of seedlings to achieve optimum plant growth improvement and assist in rehabilitation of degraded arid lands.     

茶园节能型开沟刀设计与试验

针对茶园机械化开沟减阻减耗需要,设计茶园节能型开沟刀,用于减小茶园开沟时的开沟功耗。通过理论分析确定节能型开沟刀侧切刃与正切刃曲线方程,通过离散元仿真方法确定侧切刃螺旋线终点处滑切角与正切刃在侧切刃平面内展开曲线终点处静态滑切角分别为62°、56°。对设计完成的节能型开沟刀进行田间试验,试验结果表明:在开沟深度为15、20、25 cm时,节能型开沟刀的开沟功耗分别为0.093、0.107、0.128 kW,均小于对照组通用开沟刀的开沟功耗,说明设计的节能型开沟刀在各个开沟深度均能够达到降低开沟功耗的目的。此外节能型开沟刀在不同开沟深度的沟深稳定性系数均大于90%,高于国家标准和对照组通用开沟刀试验结果,说明设计的节能型开沟刀在降低作业功耗的同时,可保证开沟质量。     

养分管理对安溪茶园土壤肥力及茶叶品质的影响

安溪是铁观音的主产区,茶园养分管理滞后已成为该地区茶叶生产的瓶颈,本研究旨在为该地区茶园的养分管理提供科学依据。试验于2015年在安溪县采集了50个茶园的茶青与土壤样品,测定了土壤5项主要肥力指标和茶青中9种主要次生代谢物含量;并根据茶农氮肥用量调研数据,初步将茶园养分管理划分为:少量、中量和过度型等三种方式。限制性主坐标轴分析发现,此分类方式可解释34.4%(P0.001)茶园土壤肥力参数的总体差异,说明此分类方式能反映出不同茶园养分管理的总体水平;并且,养分管理对表层土壤有效磷的影响最为显著。进一步分析表明,养分管理对茶青综合品质的影响可解释品质总差异的7.48%(P0.001);大部分茶青次生代谢物在中量型管理下含量最高。说明养分管理影响安溪茶园土壤的肥力状况,施肥量过高或过低均不利于高品质茶叶的生产,该地区的建议施氮量约为200～400 kg·hm~(–2)·a~(–1)。     

竹材展开机框片有限元网格的自动形成

竹材展开机框 设计，采用三角形单元自动形成的程序ＸＳ，只需输入必需最少信息，计算机就能输出原来人工完成的各种数据和图形。既可提高工作效率和计算精度，又可与有限元法计算位移和应力的程序方便地衔接，通用性好。     

施肥对红三叶群落营养元素含量和积累量的影响

本文研究了施肥对红三叶群落地上部和地下部 1 0种营养元素的影响 ,结果如下 :( 1 )从含量看 ,施氮肥后 ,地上部B明显降低 ,地下部B明显升高 ;施磷肥后 ,地上部N、B显著下降 ,地下部K、P、N上升幅度较大。 ( 2 )就积累量而言 ,施氮肥后 ,地上部大多数元素增高 ,地下部多数元素降低或无变化 ;施磷肥后 ,无论地上部还是地下部 ,大多数元素均有所增高