Glacier mass balance in High Mountain Asia inferred from a GRACE release-6 gravity solution for the period 2002–2016

We provide estimates of glacier mass changes in the High Mountain Asia (HMA) area from April2002 to August 2016 by employing a new version of gravity solutions of the Gravity Recovery and ClimateExperiment (GRACE) twin-satellite mission. We find a total mass loss trend of the HMA glaciers at a rateof –22.17 (±1.96) Gt/a. The largest mass loss rates of –7.02 (±0.94) and –6.73 (±0.78) Gt/a are found forthe glaciers in Nyainqentanglha Mountains and Eastern Himalayas, respectively. Although most glaciers inthe HMA area show a mass loss, we find a small glacier mass gain of 1.19 (±0.55) and 0.77 (±0.37) Gt/a inKarakoram Mountains and Western Kunlun Mountains, respectively. There is also a nearly zero massbalance in Pamirs. Our estimates of glacier mass change trends confirm previous results from the analysisof altimetry data of the ICESat (ICE, Cloud and Land Elevation Satellite) and ASTER (AdvancedSpaceborne Thermal Emission and Reflection Radiometer) DEM (Digital Elevation Model) satellites inmost of the selected glacier areas. However, they largely differ to previous GRACE-based studies which weattribute to our different post-processing techniques of the newer GRACE data. In addition, we explicitlyshow regional mass change features for both the interannual glacier mass changes and the 14-a averagedseasonal glacier mass changes. These changes can be explained in parts by total net precipitation (netsnowfall and net rainfall) and net snowfall, but mostly by total net radiation energy when compared to datafrom the ERA5-Land meteorological reanalysis. Moreover, nearly all the non-trend interannual masschanges and most seasonal mass changes can be explained by the total net radiation energy data. The massloss trends could be partly related to a heat effect due to increased net rainfall in Tianshan Mountains, QilianMountains, Nyainqentanglha Mountains and Eastern Himalayas. Our new results for the glacier mass changein this study could help improve the understanding of glacier variation in the HMA area and contribute tothe study of global change. They could also serve the utilization of water resources there and in neighboringareas.     

不同合成树脂工艺对改性材性能影响研究

为研究树脂对改性材性能的影响，采用2种不同工艺合成三聚氰胺-脲醛树脂（MUF），测试了树脂的相关性能。结果表明，不同合成工艺路线下制备的 MUF 树脂在固体含量、粘度、固化时间、游离甲醛含量间存在显著差异。最终树脂的分子结构类型相似性极高，但相同结构组分在不同树脂中所占比例各有差异。羟甲基基团在MUF2中所占比例高，而亚甲基桥键及醚键在MUF1中含量高。MUF1改性材的增重率（weight percent gain，WPG）值更大，但MUF2改性材的抗溶胀性（anti-swelling efficiency，ASE）和体积膨胀率（bulking rates，B）更高，MUF2改性材的尺寸稳定性更好。     

Assessing the utility of topographic variables in predicting structural complexity of tree stands in a reforested urban landscape

The transformation of natural landscapes into impervious built-up surfaces through urbanization is known to significantly interfere with the ecological integrity of urban landscapes and accelerate climate change and associated impacts. Although urban reforestation is widely recognised as an ideal mitigation practice against these impacts, it often has to compete with other lucrative land uses within an urban area. The often limited urban space provided for reforestation therefore necessitates the optimization of the ecological benefits, which demands spatially explicit information. The recent proliferation of tree stands structural complexity (SSC) and topographic data offer great potential for determining the ecological performance of reforested areas across an urban landscape. This study explores the potential of using topographic datasets to predict SSC in a reforested urban landscape and ranks the value of these topographic variables in determining SSC. Tree structural data from a reforested urban area was collected and fed into a tree stand structural complexity index, which was used to indicate ecological performance. Topographic variables (Topographic Wetness Index, slope, Area Solar Radiation and elevation)- were derived from a Digital Elevation Model (DEM) and used to predict SSC using the Partial Least Squares (PLS) regression technique. Results show that SSC varied significantly between the topographic variables. Results also show that the topographic variables could be used to reliably predict SSC. As expected, the Topographic Wetness Index and slope were the most important topographic determinants of SSC while elevation was the least valuable. These results provide valuable spatially explicit information about the ecological performance of the reforested areas within an urban landscape. Specifically, the study demonstrates the value of topographic data as aids to urban reforestation planning.     

滴灌施肥对幼龄茶树生长和养分吸收的影响

通过田间试验,研究了龙井43、白叶1号品种茶园滴灌施肥对幼龄茶树生长、养分吸收、品质成分等的影响,分析了不同施肥模式下的施肥成本投入情况。结果表明,与常规开沟施肥相比,采用滴灌施肥后,即使在化肥减量25%的情况下,树高、主干直径、树幅都显著增加,修剪物生物量增加明显;茶树对养分的吸收量明显增加,而养分的渗漏损失明显减少,从而提高了养分利用效率。从滴灌施肥的次数上分析,龙井43品种,在试验条件下年施肥次数7次可以达到较好效果,而白叶1号品种,年施14次的效果较好。     

不同类型水稻品种产量和氮素吸收利用对大气CO2浓度升高响应的差异

目的 探明不同类型水稻品种产量和氮素吸收利用对FACE(大气CO₂浓度增高)响应的差异。方法 以常规粳稻、杂交籼稻、常规籼稻共6个品种为供试材料,研究FACE对不同类型水稻产量、氮素吸收利用的影响。结果 1）FACE处理极显著提高了水稻产量,平均增加24.17%, 常规籼稻增幅最大,FACE和对照均以杂交籼稻最高;2）FACE处理显著增加了单位面积穗数,常规粳稻增幅最大,并显著增加了杂交籼稻和常规籼稻每穗粒数;3）FACE处理显著提高了成熟期吸氮量和氮素籽粒生产效率,成熟期吸氮量平均增加21.23%,杂交籼稻增幅最大, FACE和对照均以常规籼稻最高;氮素籽粒生产效率平均增加7.33%,杂交籼稻增幅最大,FACE和对照均以杂交籼稻最高。成熟期吸氮量对产量促进作用略大于成熟期氮素籽粒生产效率;4）FACE处理降低了植株含氮率,成熟期平均下降0.105个百分点,常规粳稻降幅最大。FACE处理极显著提高植株干物质量,成熟期平均增加23.95%,常规籼稻增幅最大;FACE处理显著提高常规籼稻和杂交籼稻成熟期单穗吸氮量,分别增加10.79%、13.93%,但常规粳稻下降了9.60%;FACE处理显著提高了成熟期群体吸氮强度,平均增加22.29%,杂交籼稻增幅最大。FACE处理对水稻全生育期天数无显著影响;FACE处理显著提高茎鞘、叶片、穗各器官吸氮量,叶片增幅最大,平均增加51.86%,杂交籼稻增幅最大;FACE处理显著提高了不同生育阶段吸氮量,抽穗-成熟阶段增幅最大,平均增加108.90%,杂交籼稻增幅最大;5）植株干物质量、单穗吸氮量、吸氮强度、穗吸氮量、抽穗-成熟阶段吸氮量对成熟期总吸氮量的促进作用分别大于植株含氮率、单位面积穗数、生育天数、茎鞘叶吸氮量、移栽-分蘖和分蘖-抽穗阶段吸氮量;6）FACE处理显著提高了氮肥偏生产力,降低了每百千克籽粒需氮量,前者平均增加24.16%,常规籼稻增加最多;后者平均降低4.7%,常规籼稻降幅最大。结论 FACE处理可显著提高水稻产量和氮素吸收利用效率,但品种间差异较大。     

玉米粉淀粉含量近红外模型建立与优化

以230份玉米自交系为样本，采用旋光法与一阶导数及去一条直线的光谱预处理法，构建玉米粉样淀粉含量的近红外分析（NIRS）模型。研究标明，该模型可显著提高子粒淀粉含量预测的准确性。该模型的定标标准偏差（RMSEE）、交叉验证标准偏差（RMSECV）、外部验证标准偏差（RMSEP）、定标相关系数（R_cal²）、交叉验证相关系数（R_cv²）、外部验证相关系数（R_cv²）分别为0.609、0.722、0.738、0.909、0.864和0.854。建立的玉米粉样NIRS模型可将预测值与化学值偏差控制在1.7%内，能够准确定量分析玉米子粒淀粉含量，应用于育种材料早期筛选及群体水平粗淀粉分析。     

不同控释氮肥运筹对粳稻养分吸收与氮素利用的影响

以绥粳18为供试材料,通过盆栽试验,在一次性施入控释氮肥免追肥条件下,设置不同施肥量(高、中、低、无)和施肥深度(5 cm、10 cm),探讨不同氮肥施用方式对粳稻养分吸收和氮素利用的影响。结果表明,在不同氮肥运筹条件下,粳稻各生育期氮、磷、钾的吸收、转运均存在明显的协同效应,施肥深度5 cm组,随着氮肥施用量的增加,粳稻的氮吸收总量增加,同时可促进磷的吸收,但影响幅度较小。钾变化与氮、磷变化有所不同。施肥深度10cm组,施高量氮肥抑制了粳稻对磷的吸收、减少了对氮的吸收,但有利于提高氮素利用率,对钾的吸收无显著影响。施用树脂包膜控释肥,纯氮用量为153 kg/hm^2、施肥深度5 cm、一次性施肥免追肥可获得最优水稻氮素利用效率并显著提高磷钾肥利用效率。     

外源亚精胺对盐胁迫下甜菜生长及养分吸收的影响

为了探究外源亚精胺是否具有缓解甜菜盐害作用,采用霍兰营养液室内水培方法,测定了280mmol/L NaCl胁迫条件下,喷施0.25 mmol/L外源亚精胺后,耐盐‘T510’和盐敏感‘210’甜菜品系幼苗生长、生理及其体内N、P、K养分含量的变化情况。结果发现,盐胁迫下(Na处理),除MDA和P素含量升高外,两品系甜菜幼苗的叶片相对含水量、叶面积、叶绿素含量、幼苗生物量及N、K养分含量指标均明显降低;与Na处理比,喷施亚精胺的盐胁迫处理,除MDA和P素含量降低外,其它指标明显增加,两品系甜菜幼苗生长和养分吸收状况明显改善;外源亚精胺对耐盐‘T510’品系的调节作用大于‘210’品系。因此外源亚精胺能有效缓解盐胁迫对甜菜生长的伤害,对耐盐品系的调节效果更佳。     

深松对春玉米根系分布及氮素积累与利用的影响

2015—2016年以先玉335和郑单958为试验材料，设置深松+旋耕（S+R）和旋耕（R）2个处理，研究了深松对春玉米根系分布及氮素积累与利用的影响。结果表明：深松疏松了土壤，有利于根系的生长，促进根系下扎，深松措施下先玉335和郑单958完熟期总根干重较旋耕处理分别提高了7.35%和9.25%，其中20~40 cm土层分别提高了15.52%和24.07%，30 cm以下土层根条数和根幅明显增加。深松改善根系形态特征，增加了根系与氮素的接触机会，促进了春玉米对氮素的吸收和累积，使单位重量根系氮素吸收量明显提高，吐丝前S+R处理的先玉335和郑单958单位重量根系氮素吸收量较R处理分别提高了11.22%和12.03%，处理间差异达到了显著水平。S+R处理的氮素吸收效率先玉335和郑单958较R处理分别提高6.11~6.40 kg·kg^-1和7.17~7.51 kg·kg^-1，氮肥偏生产力分别提高了3.86~8.00 kg·kg^-1和5.40~9.86 kg·kg^-1，氮素积累量分别提高了33.73~35.66 kg·hm^-1和27.85~36.61 kg·hm^-1。与先玉335相比，郑单958对深松更为敏感。