Crototropone, a new tropone derivative from Croton zehntneri

Crototropone (3-hydroxy-5,6-dimethoxy-2-methylcyclohepta-2,4,6-trien-1-one) was isolated from roots of Croton zehntneri. The structure was established by spectroscopic methods.     

Wood modification with alkoxysilanes

Wood was treated with three different alkoxysilanes which are able to undergo a sol–gel process: tetraethoxysilane (TEOS), methyl triethoxysilane (MTES) and propyl triethoxysilane (PTEO). Two types of treatments were compared: impregnation of fibre saturated wood with monomeric silane solutions, and impregnation with pre-hydrolysed partly oligomeric silanes. Wood properties such as cell wall bulking, anti-swelling efficiency (ASE), moisture uptake and durability were more significantly improved in samples treated with monomeric silanes than in samples treated with oligomeric silanes. SEM-EDX mapping showed that this treatment resulted in a higher degree of silicon incorporation into the cell wall, although the weight percent gain (WPG) was lower compared to the treatment with pre-hydrolysed partly oligomeric silanes. The resistance against soil micro-organisms was enhanced in the initial phase of incubation especially in those samples treated with organo-functional-alkoxysilanes. In miniaturised block tests with the white-rot basidiomycete Trametes versicolor, an improved durability was observed within the test period. During an air conditioning step, a weight loss of the treated samples occurred which was accompanied by a reduction in bulking and ASE. The initial reduction of moisture uptake observed after treatment diminished almost completely. This effect was explained by an ageing of the gels in the wood cell wall which is a consequence of uncompleted hydrolysis and condensation of the silanes during the treatment.     

Combined effect of wood moisture content,drill bit rotational speed and feed rate on drilling resistance measurements in Norway spruce (Picea abies (L.) Karst.)

ABSTRACT

An IML-RESI PD 400 drilling tool and a standard spade drill bit (IML System GmbH, Wiesloch, Germany) were used to study the combined effect of wood moisture content (MC), drill bit rotational speed and feed rate on drilling resistance (DR) and feeding force (FF). Tests were made with Norway spruce (Picea abies (L.) Karst.) conditioned in a normal climate (20°C/65% RH), at 20°C/95% RH, vacuum-pressure impregnated in water, and oven-dried. Rotational speeds and feed rates had an impact on feed rate per cutting edge for the major cutting edge of the drill bit which was used for correlation with DR and FF for various MC. Impact of MC on DR and FF depended on rotational speeds and feed rates of the drill bit. For feed rates per cutting edge less than 0.09?mm, DR was higher for water saturated (WS) specimens. Negligible differences between DR for various MC were found for feed rates per cutting edge between 0.09 and 0.15?mm. DR was higher at low MC for feed rates per cutting edge which were higher than 0.15?mm. FF extremely increased in conditioned (20°C/95% RH) and WS specimens at feed rates per cutting edge less than 0.1?mm.     

Critical discussion of perpendicular to grain tension testing of structural timber – case study on the European hardwoods ash,beech and maple

ABSTRACT

Knowledge about perpendicular to grain tension behavior of wood is essential, since in construction tension stresses perpendicular to grain cannot be avoided completely. Especially for hardwoods, the data basis is scarce. EN 338 design values are with 0.6 N/mm² characteristic strength set very low. The US-American National Design Specifications even set this value to zero and make local reinforcements mandatory. This paper compares strength and stiffness values attained with newly-designed, little, prismatic specimens and EN 408 structural timber specimens to evaluate the current European design values. Little specimen’s characteristic strength values range from 7.2 to 10.6?N/mm² and are assumed to be real material properties. EN 408 specimen values are with approximately 4.0?N/mm² lower. These lower values are mainly due to stress peaks introduced by the force introduction. Strength values attained for the medium-dense European hardwoods beech, ash and maple exceed EN 338 design values by a factor of six to seven. Adaptation of the EN 338 design value is not recommended, though. The abundance of influencing factors makes clear that the design value and the ensuing design code have to be synchronized carefully by tedious testing in order to make use of the perpendicular to grain tension strength potential of the selected hardwoods.     

Comparison of chitosans with different molecular weights as possible wood preservatives

Fungi cause serious problems in wood utilization, and environmentally benign wood protection is required as an alternative to traditional chemicals. Chitosan has shown promising antimicrobial properties against several microorganisms. In this study, we present the characterization of and antifungal properties of a commercial chitosan formulation developed for impregnation of wood. A broad range of chemical and mycological methods were used to evaluate the uptake, fixation, and antifungal properties of chitosan for wood preservation. The results show that the higher the uptake of chitosan the lower the relative recovery of chitosan in wood after leaching, and the higher the molecular weight of chitosan the higher the recovery. Chitosan with high molecular weight proved to be more efficient against decay fungi than chitosan with low molecular weight. The fungi tested on chitosan-amended nutrient agar medium were totally inhibited at 1% (w/v) concentration. In decay studies using small wood blocks, 4.8% (w/v) chitosan concentration gave the best protection against brown rot fungi.     

Five Years of Continuous Thaumetopoea processionea Monitoring: Tracing Population Dynamics in an Arable Landscape of South-Western Germany

Within this paper we summarize the results of the Thaumetopoea processionea monitoring at two observation sites and try to interpret population dynamics from 2006 to 2010 considering meteorological data. Furthermore, observations on the behaviour of neonates associated with oak budburst are presented and discussed. In 2007 large larval colonies occurred and population densities peaked. Massive defoliation and larval migration due to food shortage were observed regularly leading to reduced female moth fecundity. Unfavourable weather conditions probably abetted OPM population decline in spring 2008. Additionally oak budburst was delayed remarkably. More detailed observations on the hatching process and the behaviour of single colonies revealed increasing mortality after two and a half weeks of starvation. The 2009 results indicated another increase of population densities, but exceeded cool and humid weather conditions in May 2010 presumably prevented a new OPM outbreak. In accordance with previous studies egg parasitisation seems to play a minor role in OPM population dynamics.     

Using the soil gas radon as an indicator for ground contamination by non-aqueous phase-liquids

1 The Problem  One of the major problems facing risk assessment at polluted industrial sites and military bases is subsurface contamination by non-aqueous phase-liquids (NAPLs), since tracing the extent of a NAPL plume using conventional methods (drive point profiling) is usually associated with difficulties. In an effort to trace subsurface contamination as precisely as possible, monitoring points are placed in the area that might be affected by contaminants, and groundwater and soil samples are taken to the laboratory for analysis. However, the final number of monitoring points is hardly ever sufficient for distinctive contamination mapping, and this may ultimately result in an unsuitable remediation action being taken. 2 Objectives  To obtain a more detailed image of a subsurface NAPL plume and, hence, to facilitate remediation measures that are best suited for the site in question, a denser network of monitoring points is desirable. The aim of the investigation described in this paper was therefore to develop a new detection method for subsurface NAPL contamination, which is based on an easily accessibleindicator for NAPLs rather than on the analysis of soil and groundwater samples taken at the site. Based on the good solubility of radon in NAPLs, the idea was put forward that subsurface NAPL contamination should have an influence on the natural radon concentration of the soil gas. Provided this effect is significant, it would be possible to carry out a straightforward radon survey on an appropriate sampling grid covering the suspected site and thus enabling the NAPL contamination to be detected by the localization of anomalous low radon concentrations in the soil. The overall aim of the investigation was to assess the general suitability of the soil-gas radon concentration as an indirect tracer for NAPL contamination in the ground. 3 Methods  The partitioning coefficient K_NAPL/air is one of the most influential parameters governing the decrease of the radon concentration in the soil gas in the presence of a subsurface NAPL contamination. Since NAPL mixtures such as gasoline, diesel fuel and paraffin are among the most important NAPLs regarding remediation activities, laboratory experiments were performed to determine the radon-partitioning coefficient for these three NAPL mixtures. Field experiments were carried out as well. The aim of the field experiments was to test the use of the soil-gas radon concentration as a tracer for NAPL contamination on-site. For the field experiments, each site was covered with a suitable grid of soil gas sampling points. Finally, the lateral radon distribution pattern achieved on each of the sites was compared to the respective findings of the earlier research performed by conventional means. 4 Results and Discussion  The results of the laboratory experiments clearly show a very strong affinity of radon to the NAPL mixtures examined. The partitioning coefficients achieved correspond to those published for pure NAPLs (Clever 1979) and are thus in the expected range. The results of the field experiments showed that the minimum radon concentrations detected match the respective NAPL plumes traced previously. 5 Conclusions  Both the results of the lab experiments and the on-site findings demonstrate that the soil-gas radon concentration can be used as an indicator for subsurface NAPL contamination. The investigation showed that NAPL-contaminated soil volumes give rise to anomalous low soil-gas radon concentrations in the close vicinity of the contamination. The reason for this decrease in the soil-gas radon concentration is the good solubility of radon in NAPLs, which enables the NAPLs to accumulate and ‘trap’ part of the radon available in the soil pores. 6 Recommendations and Outlook  Further research is required into contamination with rather volatile NAPLs such as BTEX. Further research is also needed to examine whether it is possible to not only localize a NAPL plume, but also to obtain some quantitative information about the subsurface NAPL contamination. The authors also believe that additional investigations should be carried out to study the ability of the method to not just localize a NAPL contamination, but also to monitor on-site, clean-up measures.     

Die Bestimmung der effektiven Kationenaustauschkapazität von Gesteinen

The determination of the effective cation exchange capacity of rocks The extractable cations (1 N NH₄Cl) of broken, mortared, and ground rocks (Sandstone, Clay schist, Diabase, Alkali-Olivinbasalt) were determined using vibration extraction and percolation. These methods were evaluated by re-exchange experiments. In addition mineralogical components, specific surface and effective porosity of the rocks were determined. Al-silicates which are cation exchangers like Illite and Zeolite minerals were found in these rocks. Mortaring and grinding increased the specific surface and the exchange capacity of the rocks which have a low porosity (Clay schist and Basalt). For example, the CEC of broken Clay schist was 27 μmol_c g^?1 and increased to ≈ 40 μmol_c g^?1 after mortaring. The CEC of the rocks with a high porosity (Diabase and Sandstone) did not depend on the particle size. Therefore we assume, that inner parts of the broken rocks were reached by extraction. The CEC amounts to ≈ 50–80% of the sum of the cations, which could be extracted with NH₄Cl. This difference is probably due to the dissolution of salts. Mortaring and grinding increased the amount of cations derived from dissolving of salts. The results show, that rocks are of signficance not only for silicate weathering, but also for the cation exchange.     

Development and practical test of a weighable groundwater lysimeter for floodplain sites

Presently, the soil water balance of flood‐influenced soils in fluvial plains is insufficiently described. The new development of a weighable groundwater lysimeter is the basis for recording the water‐balance components precipitation, evapotranspiration, groundwater recharge, capillary rise, and interaction with the water course. Soil‐hydrologic measuring setups at two floodplain sites of the Elbe river serve for direct comparability of lysimeter measurements with data obtained on site. A groundwater control was designed for lysimeters that automatically adjusts the current groundwater level at the floodplain measuring setups and quantifies inflow into or outflow from the lysimeter. It turned out that the lysimeter developed is capable of identifying the individual water‐balance quantities at high accuracy. Contrary to previous assumptions, it was possible to prove groundwater recharge for the floodplain sites.     

Improved bondability of wax-treated wood following plasma treatment

In this study, the impact of a plasma treatment using dielectric barrier discharge at atmospheric pressure on wax-treated beech was investigated by surface energy determination and adhesion tests. Measurements of the surface energy revealed a strong increase in surface polarity along with increased surface energy as a result of the plasma treatment, pointing to increased adhesion properties. To evaluate the adhesion properties of a polyvinyl acetate (PVAc) adhesive on beech treated with montan ester wax and synthetic Fischer–Tropsch wax, a special peel test was applied. This peel test provided evidence of increased adhesion of the PVAc after plasma treatment of both materials investigated.