毛竹笋,材加工剩余物的饲用价值

对毛竹笋、材加工剩余物作为反刍动物饲料的营养价值进行研究表明，竹笋加工剩余物营养价值较高，可直接或经适当处理后用作饲料，竹材加工剩余物因蛋白质含量低，木质素含量高，直接作为饲料的营养价值不及作物秸秆。由于竹材加工剩余物中含有３／４的碳水化合物，故具有作为反刍动物饲料的潜在价值。对竹材加工剩余物进行氨化处理，可明显提高粗蛋白含量，并使质地变得松软，而竹材加工过程中的高温蒸煮、切削加工和烘干处理等，可破坏其细胞壁，使碎料膨松柔软，降低了粗纤维含量，作为食物纤维素定量的ＮＤＦ、ＡＤＦ和木质素值均有不同程度下降。     

以酶解渣为碳源制备木聚糖酶的研究

以里氏木霉（Tichoderma reesei)Rut C-30为产酶菌，低聚木糖制备过程中酶解渣为碳源可透导产生含低纤维素酶活（0.106IU/mL)的木聚糖酶（154.67IU/mL)，两种酶活的比值达1459，与粗木聚糖为碳源产木聚糖酶相比，木聚糖酶活提高了1.67倍，而纤维素酶活没有增加。此酶在50℃条件下酶解粗木聚糖和酶解渣时，pH值5时酶解效率最高，酶解产物通过HPLC分析，主要是木糖。该酶系的组成主要是外切-β-木糖苷酶。     

Pyrolytic characteristics of burning residue of fire-retardant wood

In order to investigate the pyrolytic characteristics of the burning residue of fire-retardant wood, a multifunctional fire-resistance test oven aimed at simulating the course of a fire was used to burn fire-retardant wood and untreated wood. Samples at different distances from the combustion surface were obtained and a thermogravimetric analysis (TG) was applied to test the prrolytic process of the burning residue in an atmosphere of nitrogen. The results showed that: 1) there was little difference between fire-retardant wood and its residue in the initial temperature of thermal degradation. The initial temperature of thermal degradation of the combustion layer in untreated wood was higher than that in the no burning wood sample; 2) the temperature of the flame retardant in fire-retardant wood was 200°C in the differential thermogravimetry (DTG). The peak belonging to the flame retardant tended to dissipate during the time of burning; 3) for the burning residue of fire-retardant wood, the peak belonging to hemicellulose near 230°C in the DTG disappeared and there was a gentle shoulder from 210 to 240°C; 4) the temperature of the main peaks of the fire-retardant wood and its burning residue in DTG was 100°C lower than that of the untreated wood and its burning residue. The rate of weight loss also decreased sharply; 5) the residual weight of fire-retardant wood at 600°C clearly increased compared with that of untreated wood. Residual weight of the burning residue increased markedly as the heating temperature increased when burning; 6) there was a considerable difference with respect to the thermal degradation temperature of the no burning sample and the burning residue between fire-retardant wood and untreated wood. __________ Translated from Journal of Beijing Forestry University, 2006, 28(3): 133–138 [译自: 北京林业大学学报]     

Liquefaction and product identification of main chemical compositions of wood in phenol

To clarify liquefaction ratios and their construction variations of the main chemical compositions of wood in phenol using phosphoric acid as a catalyst, the chemical ingredients of wood such as holocellulose, cellulose and lignin, were measured and extracted according to GB methods. With Fourier transform infrared （FTIR）, the product identification of reactant before and after liquefaction in phenol was investigated. The molecular weights and their distributions of the liquefaction results （acetone soluble parts） were studied by gel permeation chromatography （GPC）. Results show that the molecular weights and their distributions of poplar and Chinese fir are almost the same. In poplar, the distribution of cellulose is the largest, and that ofholocellulose the smallest after liquefaction. For Chinese fir, the distribution of holocellulose is the largest, and that of cellulose the smallest. After liquefaction of poplar cellulose, the change bands of FTIR spectrum observed below 1 600 cm^-1, can be attributed to new substitute groups. The same is true for poplar lignin. For Chinese fir, the spectra of liquefaction results of all chemical compositions differ from that of wood meal. This reveals the more activity groups were produced because of the reactions between Chinese fir and phenol. The research shows that the liquefaction ratios of poplar decrease in the following order： holocellulose 〉 lignin 〉 cellulose, and those of Chinese fir in the order： lignin 〉 cellulose 〉 holocellulose.     

Carbon and nitrogen dynamics under windrowed residues during the establishment phase of a second-rotation hoop pine plantation in subtropical Australia

The dynamics of carbon (C) and nitrogen (N), derived from the decomposition of windrowed harvest residues, was examined in the establishment phase of a second rotation (2R) hoop pine (Araucaria cunninghamii Aiton ex A. Cunn) plantation in subtropical Queensland, Australia. Following harvesting and site preparation, when residues were formed into windrows, in situ N mineralisation was measured in positions along the three tree-planting rows formed between the windrows. The position above the windrow had a higher nitrification rate than the other positions, averaging about 18 kg N ha⁻¹/month compared with 12 and 9 Kg N ha⁻¹ for the positions between and below the windrow positions, respectively. This position also had consistently greater soil moisture.

Macroplots were formed extending 5 m above and 10 m below a windrow. Windrowed residues within the macroplots were replaced by ¹⁵N-labelled material comprising hoop pine foliage, branch and stem. Hoop pine trees were planted within each macroplot with foliar samples taken at 12 and 24 months. Differences in foliar ¹⁵N enrichment between positions within macroplots were <1‰. Soil samples were taken from positions along the macroplots at 6-monthly intervals. Samples revealed an initial release of labile C and N but soil δ¹⁵N showed that residue-derived N was largely immobilised within the windrows for the 30-month sampling period. Whilst the use of windrows may act as a barrier to the down-slope movement of water, the residue N within the windrows may not be available to the trees of the following rotation for a considerable period following planting. Trees closest to the windrows may be able to introduce roots under the windrows thereby gaining access to the available N, but trees in the central tree planting row are unlikely to derive any significant benefit from the decomposition of windrowed residues.     

超高效液相色谱法测定吡蚜酮在棉花和土壤中的残留

建立了超高效液相色谱-亲水色谱柱测定吡蚜酮在棉花和土壤中残留量的分析方法。样本在弱碱条件下采用分散固相萃取(QuEChERS)法进行前处理。结果表明:吡蚜酮在棉叶和棉籽中添加水平为0.05~0.50 mg/kg时,其平均回收率分别为76.9%~91.1%和76.4%~93.7%,相对标准偏差(RSD)为7.2%~8.2%和6.2%~9.8%;在土壤中添加水平为0.02~0.5 mg/kg时,平均回收率为83.8%~94.6%,RSD为5.3%~8.0%。在山东和河南两地按推荐剂量(有效成分30 g/hm2)和1.5倍推荐剂量(有效成分45 g/hm2)施用10%吡蚜酮·高效氯氟氰菊酯悬浮剂后4 d,吡蚜酮在土壤和棉叶中的残留量分别低于0.02和0.05 mg/kg;至收获时,其在土壤和棉籽中的最终残留量低于0.02和0.05 mg/kg。     

丙溴磷在稻田中的残留降解行为研究

通过田间试验,研究了丙溴磷在稻田中的残留动态过程,借助气相色谱技术,得到添加回收率为80.1～113.2%,相对标准偏差为2.7～9.4%。丙溴磷在稻田水、土壤及水稻植株中的降解半衰期分别为1.9～2.2d,3.6～4.3d,1.8～2.5d;丙溴磷在稻田水、稻田土壤及水稻植株中的最低检出浓度分别为5.0×10-2mg/L、5×10-2、5.0×10-2mg/kg。     

茶叶中7种有机氯和拟除虫菊酯类农药残留检测技术研究

本文对茶叶中7种有机氯类和拟除虫菊酯类农药残留检测的前处理技术进行了研究,对比了2种不同的提取溶剂对农药回收率、净化效果的影响,建立了丙酮∶正己烷(1∶1,V/V)提取,Florisil固相萃取小柱净化的方法。本方法回收率在82.3～109.8%之间,变异系数3.3～10.22%,最低检出浓度为0.001mg/kg。该种残留分析前处理方法具有操作简便、成本低、回收率高、精密度好的特点。     

Determination of selected antibiotics in farmed fish species using LC‐MS/MS

The aim of the study was to monitor the occurrence of 37 antibiotics from different classes including fluoroquinolone, tetracycline, macrolide, sulphonamide, penicillin, amphenicol and cephalosporin in three different farmed fish species (n = 75; rainbow trout, see bass, gilthead see bream) from five cities in Turkey. A method for LC‐MS/MS was optimized and validated to assess these antibiotics. As a result, 25 samples showed contamination with at least one antibiotic residue. The most detected antibiotics were norfloxacin (NOR) (18.7%), marbofloxacin (MAR) (12%), tetracycline (TC) (10.7), danofloxacin (DAN) (9.3%), oxytetracycline (OTC) (9.3%), tilmicosin (TLM) (8%) and enrofloxacin (ENR) (6.7%). A total of 17.3% of samples examined were found to be contaminated with residues exceeding the maximum residue limits (MRLs). The results indicate that antibiotics are frequently used in aquaculture production without the lack of knowledge. This study also revealed that the consumption of farmed fish could produce a public health concern as the level of residues for some antibiotics was much higher than MRLs.     

中国和欧盟动物源性产品中药物残留限量差异性分析(一)

将中国和欧盟动物源性产品中药物残留标准进行了对比,同时结合TBT/SPS预警数据库,找出二者差异性,并提出了改进建议。