基于网络嵌入性的我国东北国有林区知识转移机理

文中从社会网络视角分析我国东北国有林区职工、家庭及林业企业知识转移的过程和影响因素，以期通过社会关系和网络结构促进林业企业转型。应用知识转移基本理论构建东北国有林区多层次知识转移理论模型，在此基础上从社会网络视角分析林区职工、家庭和林业企业3个层面的知识转移机理。研究表明:增强林区知识转移个体与利益相关者的联系程度、占据更多的结构洞位置以及提高个体网络中心度和凝聚程度有利于知识获取和内化；林区待岗职工与利益相关者的弱联系有利于其获得更多就业机会；国有森工企业由于过度嵌入社会网络，知识内化和创新动力不足。     

贮运条件对草莓主要色素成分稳定性的影响

草莓在贮藏和运输期间会产生褪色现象,花青素含量逐渐减少。为研究光照时间、温度、pH、金属离子对草莓花青素的影响,探索合适的加工与贮运条件,在花青素含量保持一致的情况下设置4种反应条件,探讨光照时间、温度、pH、金属离子对草莓花青素的影响。草莓花青素在自然光下照射8 h,吸光度值下降25%,温度高于60℃后,吸光度值下降67%。当pH>7时,吸光度值下降85%,添加Na⁺、Mg²⁺后的色素提取液反应2 h后所测吸光度值分别保持在0.070和0.050左右,而添加Fe³⁺后测得的吸光度值下降87%。实验结果表明,草莓在贮运过程中应避光、低温、保持酸性条件,且避免与铁制品接触。     

花生壳黄酮的提取纯化工艺

本文采用酶法预处理结合超声波辅助提取的方式，最大程度地提高了花生壳总黄酮的得率，并优化大孔树脂纯化工艺，提高了有效成分的纯度。花生壳黄酮的最佳提取工艺为：花生壳粉与水混合，半纤维素酶与木聚糖酶按1:1（m/m）复配，用量0.25‰，50℃酶解30 min后，按料液比1:20（m/V）加入乙醇至终浓度60%，于功率1000 W，55℃超声波辅助提取60 min，花生壳总黄酮的得率约为2.5%。选用D101型大孔树脂，上样缓冲液为pH 5.0的60%乙醇溶液，洗脱液为pH 10.0的70% 乙醇溶液，上样与洗脱流速为0.75 BV/h和1.5 BV/h。纯化后的花生壳总黄酮和木犀草素的纯度分别为10.54%和5.85%，提高了90%和120%。     

大白菜TPS基因家族鉴定及其在高温胁迫下的表达分析

为明确大白菜TPS(BrTPS)家族成员信息及对高温胁迫信号的响应,本研究利用生物信息学方法,在大白菜基因组数据库中鉴定了BrTPS基因家族成员,并对其理化性质、进化特征、蛋白结构及在高温胁迫下的表达模式进行分析。结果表明,大白菜全基因组含有15个TPS基因家族成员,分布于8条染色体上。除BrTPS14和BrTPS15外,其余成员各含有1个TPS和1个TPP结构域,并且所含motif的排列顺序也完全一致。理化性质分析发现,15个成员的氨基酸长度介于129~1459 aa之间,分子量大小在14.73~165.83 kD之间,大部分BrTPS蛋白为酸性蛋白和亲水蛋白,以无规则卷曲作为二级结构主要构成元件。进化分析表明,大白菜TPS基因家族成员可分为2类,其中ClassⅠ包含5个成员,ClassⅡ包含10个成员。本研究对高温胁迫前后不同组织和持续高温胁迫下叶片中的表达分析,发现大部分的BrTPS基因可对高温胁迫产生响应,但在表达规律上存在差异。这些研究结果为后续研究大白菜TPS基因提供一定参考。     

纵条纹炭角菌的研究进展

纵条纹炭角菌具有镇静、催眠等药用价值,已实现工厂化、规模化栽培。为探究纵条纹炭角菌的研究进展,对其分类学地位、生物学特性、人工培养、化学成分和生理活性等方面的文献进行综述,并提出未来研究的方向和应用前景。     

大豆PHD家族蛋白的全基因组鉴定及表达特征分析

PHD（Plant Homeodomain Finger）基因家族编码一类锌指转录因子,广泛参与植物的生长发育和逆境应答过程。通过全基因组鉴定获得了95个大豆PHD家族蛋白。通过共线性分析、进化树构建、基因结构和功能结构域鉴定、GO注释分析、不同组织间和非生物胁迫下表达分析等,获得了大豆PHD家族基因复制、家族进化、保守结构域及基因表达等信息。结果表明,大豆PHD基因在家族进化、基因结构和保守结构域上存在较大变异,可能参与Zn ²⁺结合、DNA结合及表观遗传调控等分子过程,参与调控植物生长发育和逆境应答。这些结果为进一步研究大豆PHD家族在生长发育和逆境应答中的生物学功能提供重要线索。     

采后UV-C处理对树莓贮藏保鲜效果的影响

以"September"树莓果实为材料,采用0.43、2.15、4.3和6.45 kJ/m2的UV-C进行辐照处理,并在4℃下贮藏,通过测定贮藏期间果实腐烂指数、失重率、可溶性固形物含量、总酚含量和抗氧化能力,研究UV-C处理对树莓果实保鲜效果的影响。结果表明,UV-C处理能够显著抑制果实腐烂指数、失重率的上升,减缓果实可溶性固形物含量、总酚含量的下降,增强果实的抗氧化能力,维持果实较好的品质。在4个UV-C处理剂量中,4.3 kJ/m2UV-C处理组果实的腐烂指数、失重率最低,可溶性固形物含量和总酚含量最高,抗氧化能力最强。适宜剂量的UV-C处理(4.3 kJ/m2)能维持树莓果实采后品质,增强抗性,延缓衰老。     

Impact of weather variables and season on sporulation of Phytophthora pluvialis and Phytophthora kernoviae

Phytophthora pluvialis and Phytophthora kernoviae are the causal agents of important needle diseases on Pinus radiata in New Zealand. Little is known about the epidemiology of the diseases, making the development of control strategies challenging. To investigate the seasonality and climatic drivers of sporulation, inoculum traps, consisting of pine fascicles floating on water in plastic containers, were exchanged fortnightly at five sites in P. radiata plantations between February 2012 and December 2014. Sections of needle baits were plated onto selective media and growth of Phytophthora pluvialis and P. kernoviae recorded. To explore the generalizability of these data, they were compared to detection data for both pathogens from the New Zealand Forest Health Database (NZFHDB). Further, equivalent analyses on infection of Rhododendron ponticum by P. kernoviae in Cornwall, UK allowed the comparison of the epidemiology of P. kernoviae across different host systems and environments. In New Zealand, inoculum of P. pluvialis and P. kernoviae was detected between January–December and March–November, respectively. Inoculum of both species peaked in abundance in late winter. The probability of detecting P. pluvialis and P. kernoviae was greater at lower temperatures, while the probability of detecting P. pluvialis also increased during periods of wet weather. Similar patterns were observed in NZFHDB data. However, the seasonal pattern of infection by P. kernoviae in the UK was the opposite of that seen for sporulation in New Zealand. Phytophthora kernoviae was likely limited by warmer and drier summers in New Zealand, but by colder winter weather in the UK. These results emphasize the importance of considering both environmental drivers and thresholds in improving our understanding of pathogen epidemiology.     

Innovating in less developed regions: What drives patenting in the lagging regions of Europe and North America

Not all economically disadvantaged—“less developed” or “lagging”—regions are the same. They are, however, often bundled together for the purposes of innovation policy design and implementation. This paper attempts to determine whether such bundling is warranted by conducting a regional level investigation for Canada, the United States, on the one hand, and Europe, on the other, to (a) identify the structural and socioeconomic factors that drive patenting in the less developed regions of North America and Europe, respectively; and (b) explore how these factors differ between the two contexts. The empirical analysis, estimated using a mixed‐model approach, reveals that, while there are similarities between the drivers of innovation in North America's and Europe's lagging regions, a number of important differences between the two continents prevail. The analysis also indicates that the territorial processes of innovation in North America's and Europe's less developed regions are more similar to those of their more developed counterparts than to one another.     

Backshoring and nearshoring: An overview

Increasingly, economies that have traditionally benefited from offshoring are losing some of their strategical advantages, with a consequent increase in backshoring by developed economies. This paper describes the phenomenon and tries to shed light on the current challenges, trends, and debates in the area, and on the main determinants of backshoring. A new phenomenon known as nearshoring is also analysed—this consists of relocating some previously offshored manufacturing activities so that they are now close to previous core locations, but not so close as to suffer from disagglomeration effects. This combines the advantages of offshoring and backshoring.