‘哈伯’南天竹组织培养和快速繁殖

为建立‘哈伯’南天竹组织培养和种苗繁育技术体系,以半木质化带芽茎段为外植体材料开展植株再生研究。通过观察对比试验法、L₉(3⁴)正交试验设计完全随机法、极差分析、显著性检验、LSD多重比较,探讨了‘哈伯’南天竹组培的最适培养基配方。试验结果表明：最佳诱导培养基为MS + 6-BA 2.0 mg/L + IBA 0.1 mg/L +蔗糖30 g/L,诱导萌动率71.77%,成活率85.51%;最佳增殖培养基为WPM +6-BA 1.5 mg/L + IBA 0.01 mg/L + 蔗糖30 g/L,增殖系数6.3;最佳生根培养基为1/2 MS+ IBA 0.5 mg/L + NAA 1.0 mg/L + 蔗糖20 g/L + AC 0.2 g/L,生根率97.63%;试管苗移入泥炭土:珍珠岩=3:2(V/V)混合基质中,移栽成活率96.67%。该试验建立了高效稳定的组培快繁技术体系,得到的组培苗后代能够稳定的保持母本优良性状,为工厂化育苗提供了技术支撑。     

丛生竹林下竹荪富硒菌棒覆土栽培技术

在丛生竹林下对不同基质配方和硒浓度菌棒进行埋棒栽培以及覆土方式栽培试验，结果表明，菌棒不同基质配方对竹荪产量及其营养成分有显著影响，而且三列浅沟形和双列龟背形2种覆土方式有利于提高竹荪产量。改良基质配方菌棒竹荪产量比常规配方提高约50%；在添加外源硒质量分数为0~2.0 mg/kg的浓度范围内，竹荪子实体产量先随着硒浓度的增加而逐渐增加后再有所降低，基质中添加1.5 mg/kg硒肥比不添加产量提高了195.30%。基质中添加硒质量分数为1.0~2.0 mg/kg的硒肥可以较显著地提高竹荪花的硒含量，其干物质中硒含量平均值从约2.50 mg/kg提高到8.05~13.30 mg/kg，外源硒肥利用率达到9.70%~15.36%。菌棒不同基质配方对竹荪子实体的粗蛋白及粗多糖含量有明显影响，改良配方竹荪蛋与竹荪花的粗蛋白含量是常规配方的1.21和1.29倍，其粗多糖含量是常规配方的4.81和1.35倍；基质中添加硒肥与不添加硒肥相比，竹荪蛋与竹荪花中粗蛋白含量分别增加了40.90%和14.30%。在硒质量分数为1.0 mg/kg的竹荪菌棒林下覆土栽培试验中，三列浅沟形覆土方式单位面积鲜竹荪蛋产量最高，为10.27 kg/m²；双列龟背形覆土方式单个菌棒的鲜竹荪蛋产量最高，达1.40 kg。三列浅沟形和双列龟背形2种覆土方式基质生物转化率分别为93.00%和94.14%，达到了较高水平。     

财税激励政策助推食用菌企业转型升级

针对食用菌产业中出现的菌种选取不精,产量过剩,加工发展缓慢和环境污染以及技术创新力度不足等问题,政府相关部门应出台一系列的财税激励政策,重点推进食用菌产业全面的转型升级,切实提高食用菌产业的经济效益。通过分析食用菌产业发展的市场状况,总结食用菌产业转型升级的限制因素,为加快企业转型升级提出相应的财税激励政策建议,以推动食用菌产业的创新发展。     

滴灌下生物质改良材料对盐渍土水盐氮运移的调控效应

为探究生物质改良材料对滴灌盐渍土水、盐、肥运移过程的调控效应，采用土箱模拟试验，研究了水肥一体化滴灌条件下，生物炭和腐殖酸两种改良材料对盐渍土水、盐、氮运移和再分布过程及其时空分布特征的影响规律。结果表明：在滴灌条件下，盐渍土壤水盐的时空动态变化表现出明显的水分入渗驱动的盐分运移过程和蒸发扩散驱动的水盐再分布过程；铵态氮含量在时间上表现出先增大、后减小的变化趋势，在空间上的运移再分布特征较弱；硝态氮含量初始时空分布表现出与水盐相似的运移特征，受铵态氮硝化作用的多重影响，后期空间分布与铵态氮空间分布相似；生物炭通过提高土壤饱和导水率，增大了入渗阶段土壤水、盐、氮的运移速率和分布范围；腐殖酸通过提高土壤田间持水率增大了再分布过程土壤水、盐、氮的分布范围和强度，同时其对尿素的水解和硝化过程表现出更强的抑制效果。应用生物质改良材料在改变土壤物理性状进而调控滴灌土壤水盐运移的同时，还影响土壤氮素转化运移过程及其分布，这为水肥一体化滴灌盐渍农田的节水、控盐、减肥治理提供了理论基础。     

白云国家森林公园适老性评价及优化分析

指出了人口老龄化是社会发展的必然趋势,也是当前中国面临的重要社会问题之一,国家和地方各级政府出台了一系列政策,切实保障老年人的权益。森林公园除保护其范围内自然环境和自然资源外,为人们的游憩、疗养、避暑和文化娱乐等提供了良好的环境,逐渐成为老年人休闲娱乐生活的选择。选取浙江丽水白云国家森林公园为研究对象,通过实地踏查、问卷调查和随机访谈等方法,深入调查了老年人个人基本资料及背景、活动状况和使用情况,对3类典型空间和4类景观元素进行了详细地分析,针对不足之处提出了相应的优化建议,以期为相关公园绿地的适老性规划设计提供建设思路。     

基于距离相关系数和KNN回归模型的森林蓄积量估测研究

【目的】探究Landsat8 OLI数据和KNN算法在森林蓄积量估测中的潜力。【方法】以湖南省湘潭县为研究区,采用Landsat8 OLI数据和同时期的二类调查数据,通过距离相关系数筛选特征,分别采用线性回归模型(MLR)、K-近邻模型(KNN)、距离加权KNN模型(DW-KNN)和优化欧式KNN模型(FW-KNN)对森林蓄积量进行估测。使用十折交叉方法进行精度检验,对检验结果进行对比分析。【结果】3种KNN模型的估测结果均高于传统的线性模型,并且在3种KNN模型中,FW-KNN算法效果最好,决定系数达到0.69,为3种模型中最高;3种KNN模型中,本研究优化欧氏距离KNN模型的估测精度最高,其均方根误差为30.3%,相比于传统KNN模型的均方根误差降低了5.1%,相比于DW-KNN模型降低了3.3%。【结论】采用DW-KNN蓄积量估测结果明显优于其他两种模型,说明通过特征与蓄积量的相关性优化样本间的距离是一种可行的KNN优化方法。     

Age estimation of different tree species using a special kind of an electrically recording resistance drill

The determination of tree age is an important issue for urban green planning, forestry and dendrology; finding non-destructive and quasi-non-destructive methods for this purpose is of great theoretical and practical importance. The resistance drilling method is quasi-non-destructive because the average diameter of an opening that remains after drilling does not exceed 3 mm. Do electrically recording resistance drills allow precise assessment of tree age? The aim of this study is to assess the accuracy of determining the number of tree rings based on an examination of this special kind of drilling resistance profiles for three tree species, the pine Pinus sylvestris L., the oak Quercus robur L., and the birch Betula pendula ROTH. In 2015 and 2016, 15 pine trees, 15 oak trees, and 15 birch trees were randomly selected. For each studied tree, a measurement was conducted using the electrically recording resistance drill IML-Resi E400 with a flat-tipped 1.5/3 mm steel needle (research sample), and an increment core was taken (reference sample). The drill used was not a real Resistograph^®. The analysis of the E400-profiles underestimated the number of tree rings; the mean bias error (MBE) values were –6.5, –2.5, and –6.0 years for pine, oak, and birch, respectively. The proportion of investigated trees with less than five years difference between the research and reference samples varied from 38.4 (birch) to 66.7 (oak) percent. The accuracy of tree age determination was lowest for birch and highest for oak. The binomial generalised linear model (GLM) revealed that the most accurate tree age assessments were obtained from tree rings wider than 2 mm. The measurements clearly showed that the electrically recording resistance drill IML-Resi E400 enables a quick, although approximate, tree age assessment. Future research should concentrate on electronically regulating and recording drills, providing a higher spatial and signal resolution, and a stronger correlation to wood density.     

Replication of neurovirulent equine herpesvirus type 1 (EHV-1) in CD172a+ monocytic cells

Equine herpesvirus type 1 (EHV-1) is responsible for respiratory disorders, abortion and myeloencephalopathy (EHM) in horses. Two pathotypes of EHV-1 strains are circulating in the field: neurovirulent (N) and non-neurovirulent (NN). For both strains, CD172a⁺ monocytic cells are one of the main carrier cells of EHV-1 during primary infection, allowing the virus to invade the horse’s body. Recently, we showed that EHV-1 NN strains showed a restricted and delayed replication in CD172a⁺ cells. Here we characterize the in vitro replication kinetics of two EHV-1 N strains in CD172a⁺ cells and investigate if the replication of these strains is similarly silenced as shown for EHV-1 NN strains. We found that EHV-1 N replication was restricted to 7–8% in CD172a⁺ cells compared to 100% in control RK-13 cells. EHV-1 N replication was not delayed in CD172a⁺ cells but virus production was significant lower (10^3.0 TCID₅₀/10⁵ inoculated cells) than in RK-13 cells (10^8.5 TCID₅₀/10⁵ inoculated cells). Approximately 0.04% of CD172a⁺ cells produced and transmitted infectious EHV-1 to neighbour cells compared to 65% of RK-13 cells. Unlike what we observed for the NN strain, pretreatment of CD172a⁺ cells with histone deacetylases inhibitors (HDACi) did not influence the replication of EHV-1 N strains in these cells. Overall, these results show that the EHV-1 replication of N strains in CD172a⁺ cells differs from that observed for NN strains, which may contribute to their different pathogeneses in vivo.     

菠萝蜜种子淀粉制备香草兰微胶囊的工艺研究

以菠萝蜜种子淀粉为壁材,采用饱和水溶液法制备香草兰精油微胶囊,以包埋产率为指标,采用响应面分析法对微胶囊的包埋条件进行优化探讨。结果表明:5个单因素中,影响最显著的因素为壁芯材比例、包埋温度和包埋时间。响应面优化得到香草兰精油微胶囊的最佳工艺条件为壁芯材比例为7.5∶1;包埋时间72 min;包埋温度54℃,此条件下的包埋产率为(95.46±0.2)%,包埋率为(76.35±0.6)%,载油量为(27.73±0.3)%。试验证明,此条件结果与模型预测值相吻合,此工艺条件可为菠萝蜜种子淀粉包埋香草兰精油微胶囊工艺提供理论依据。