水流冲击多段滞留气团的三维数值模拟

针对水气两相瞬变现象,充分考虑了水体弹性、气体可压缩性、水-气交界面的动态运动以及多段气团间相互作用,采用三维CFD方法对起伏管道内含多段滞留气团的水气两相作用进行建模和模拟,选择Standard k-ε湍流模型进行模拟研究,将三维计算结果、现有一维模型计算结果与试验结果进行对比分析,并通过水气两相分布图展现动态变化过程.结果表明:与一维模型相比,三维CFD模型能够更为准确地模拟起伏管道内瞬变压力波动,并且能够清楚描述水气掺混、耦合的动态变化.水流冲击初始两段滞留气团压力波动曲线显示,多气团间的瞬变压力并非同步变化,可能呈现多气团峰值压力交替出现的情况,这与初始气团长度密切相关.水气交界面自由变化,阻断水体长度时刻发生变化,当水体运动到管道弯曲处时会产生新的阻断水体,将气团分成若干部分.     

蜗壳式离心泵外特性仿真与实验研究

为探索不同仿真方法的适用性,对ns=157的单级蜗壳离心泵不同工况的扬程和效率进行定常和非定常计算,并分别分析了定常计算时不同叶片夹角及非定常计算时不同时间步长的影响,通过与实验对比,得到的主要结论有:定常计算仅适用于额定工况外特性仿真,其扬程和效率计算误差分别为4.9%和2.9%,而定常多相位的计算误差分别为7.1%和3.2%;非定常仿真计算时,以4°为时间步长,并间隔20°保存一次计算数据,较好地预测出扬程曲线走势,额定工况扬程和效率计算误差约1.1%和1.8%,但小流量和大流量区间扬程计算误差达到10%左右。因此在水力优化设计时,若只关注高效点位置及其扬程和效率,可采用定常计算,若还关注扬程曲线走势,则应采用非定常计算。     

Expression of Anti-Lipopolysaccharide Factor Isoform 3 in Chlamydomonas reinhardtii Showing High Antimicrobial Activity

Antimicrobial peptides are a class of proteins with antibacterial functions. In this study, the anti-lipopolysaccharide factor isoform 3 gene (ALFPm3), encoding an antimicrobial peptide from Penaeus monodon with a super activity was expressed in Chlamydomonas reinhardtii, which would develop a microalga strain that can be used for the antimicrobial peptide production. To construct the expression cluster, namely pH2A-Pm3, the codon optimized ALFPm3 gene was fused with the ble reporter by 2A peptide and inserted into pH124 vector. The glass-bead method was performed to transform pH2A-Pm3 into C. reinhardtii CC-849. In addition to 8 μg/mL zeocin resistance selection, the C. reinhardtii transformants were further confirmed by genomic PCR and RT-PCR. Western blot analysis showed that the C. reinhardtii-derived ALFPm3 (cALFPm3) was successfully expressed in C. reinhardtii transformants and accounted for 0.35% of the total soluble protein (TSP). Furthermore, the results of antibacterial assay revealed that the cALFPm3 could significantly inhibit the growth of a variety of bacteria, including both Gram-negative bacteria and Gram-positive bacteria at a concentration of 0.77 μM. Especially, the inhibition could last longer than 24 h, which performed better than ampicillin. Hence, this study successfully developed a transgenic C. reinhardtii strain, which can produce the active ALFPm3 driven from P. monodon, providing a potential strategy to use C. reinhardtii as the cell factory to produce antimicrobial peptides.     

基于有限元的汽车扭臂热锻工艺研究

文章以汽车扭杆力臂为研究对象,通过DEFORM-3D有限元分析对汽车扭杆力臂热锻工艺过程进行模拟试验,分析了成形过程中的上模载荷情况、应力应变场分布情况和温度场的变化规律。以提高产品质量和降低载荷为主要目的,给出合理的热加工参数,分析结果能为类似锻件的热模锻工艺和模具设计提供依据。     

数值模型结构不确定性对模拟结果的影响分析

以内蒙古鄂托克旗为例,基于GMS中的MODFLOW模块构建了地下水流数值模拟模型,分析了模型结构(含水层厚度、参数分区)与模型参数不确定性因素对模拟结果的影响.研究结果表明:含水层不确定情景(含水层下边界概化为隔水底板平均值870 m)与实际情况水头差值绝对值的累计和最大为701 m,对模拟结果起了主控作用;当含水层下边界概化为910,940 m时,累计和分别增加为1 013,1 593 m;与仅考虑单个不确定性因素相比,同时考虑模型参数与含水层不确定情景累计和最大为738 m,同时考虑参数分区与含水层不确定情景累计和最大为791 m.因此,在构建地下水流数值模拟模型时,应优先考虑含水层空间结构概化的合理程度,同时考虑多个不确定性因素对模拟结果的综合影响,使地下水数值模拟模型能更精确地反映真实的地下水流状况.     

Hybrid breeding for biomass yield in winter triticale: II. Combining ability and hybrid prediction

Accurate hybrid prediction and knowledge about the relative contribution of general (GCA) and specific combining ability (SCA) are of utmost importance for efficient hybrid breeding. We therefore evaluated 91 triticale single-cross hybrids in field trials at seven environments for plant height, heading time, fresh biomass, dry matter content and dry biomass. Fresh and dry biomass showed the highest proportion (23%) of variance due to SCA. Prediction accuracies based on GCA were slightly higher than based on mid-parent values. Utilizing parental kinship information yielded the highest prediction accuracies when both parental lines have been tested in other hybrid combinations, but still moderate-to-low prediction accuracies for two untested parents. Thus, hybrid prediction for biomass traits in triticale is currently promising based on mid-parent values as emphasized by our simulation study, but can be expected to shift to GCA-based prediction with an increasing importance of GCA due to selection in hybrid breeding. Moreover, the performance of potential hybrids between newly developed lines can be predicted with moderate accuracy using genomic relationship information.     

miR-140-3p inhibits viability,invasion and migration of non-small-cell lung cancer A549 cells by targeting PD-L1

AIM: To explore the target relationship between microRNA-140-3p (miR-140-3p) and programmed cell death ligand 1 (PD-L1) and their effect on the viability, migration and invasion of non-small-cell lung cancer A549 cells.METHODS: RT-qPCR was used to detect the miR-140-3p expression in HLF-1, A549 and H1299 cells, and then the A549 cells with the most significant difference were selected as the subsequent research object. TargetScan software and dual-luciferase reporter assay were performed to predict and confirm the target relationship between miR-140-3p and PD-L1. RT-qPCR and Western blot were used to determine the effects of miR-140-3p mimic and inhibitor on PD-L1 expression level. MTT assay was used to detect the viability of A549 cells. Transwell assay was performed to detect the migration and invasion abilities of the A549 cells.RESULTS: miR-140-3p was significantly down-regulated in the A549 cells and H1299 cells (P<0.05). Transfection with miR-140-3p mimic decreased the expression of PD-L1 and inhibited the viability, migration and invasion of the A549 cells. Transfection with pcDNA3.0-PD-L1 reversed the inhibitory effect of miR-140-3p on the viability, migration and invasion of the A549 cells.CONCLUSION: miR-140-3p inhibits the viability, migration and invasion of A549 cells by targeting PD-L1.