Effect of tapping activity on the dynamics of radial growth of Hevea brasiliensis trees

Rubber tree (Hevea brasiliensis Müll. Arg.) radial growth dynamics were monitored with displacement sensors, together with latex production, to investigate three aspects of the dual production of latex and wood: (1) the usefulness of fine-scale dendrometric measurements as a physiological tool to detect water shortage through radial growth; (2) the dynamic aspects, both at the seasonal and at the multi-year scale, of the competition between latex and wood production; and (3) the spatial distribution of radial growth rates around the tapping cut. Radial growth of untapped control trees started with the onset of the rainy season and lasted until the onset of the dry season, ceasing completely during the driest period. Displacement sensors provided a sensitive means of detecting water shortage, with a clear correlation between diameter variations and changes in water availability (both daily evapotranspiration and monthly rainfall) over the whole annual cycle. However, the correlation was significantly disturbed in tapped trees. After resumption of tapping, the radial growth rate dropped sharply within two weeks and the effect persisted throughout the whole season, so that the cumulative growth of tapped trees was about half that of untapped trees, with the cumulative growth deficit reaching 80% for the period from mid-June to November. This long-known negative impact of tapping on growth was much stronger in the second year of tapping than in the first, whereas latex production increased significantly between the first and second year of tapping. The increased latex production, which could not be ascribed to climatic conditions, shows that the establishment of an artificial latex sink is a progressive, long-term process likely involving many aspects of metabolism. As expected, ethylene significantly increased latex production in both years; however, ethylene had no effect on the growth rates of tapped trees. Radial growth was differentially affected at different locations around the tapping cut, with growth rates significantly lower in the tapped panel than in the untapped panel, and higher above the cut than below the cut. Thus, caution is needed when deriving whole stem wood production from girth measurements at one location on the stem, especially from girth measurements made close to the tapping cut. This also provides new evidence for the location of the latex regeneration area in the tapped panel, below the cut.     

Advanced solid phase extraction using molecularly imprinted polymers for the determination of quercetin in red wine

Solid phase extraction (SPE) based on molecularly imprinted polymers (MIPs) is a novel approach for sample preparation and preconcentration, gaining increased interest in the fields of environmental, clinical, and food analysis. The first application combining MIPs with SPE for advanced beverage analysis is reported. MIPs for the flavonoid quercetin have been generated, using quercetin as a template molecule in a self-assembly approach and yielding imprinting of 1% of the used template. The MIP achieved a capacity of 0.4 g quercetin per gram polymer and a recovery rate of 98.2%. The application of these synthetic receptors as SPE material for the selective extraction and preconcentration of quercetin from synthetic and red wine samples was investigated. Red wine samples from a French Merlot were directly applied onto the SPE cartridge. The collected fractions were analyzed by high-pressure liquid chromatography. For verification of the obtained results, a similarly prepared nonimprinted polymer and a classical octadecyl silane reversed-phase cartridge were applied as the SPE matrix during control experiments. The MIP enabled the selective extraction of quercetin from a complex matrix, such as red wine, spiked with 8.8 mg per liter quercetin, demonstrating the potential of molecularly imprinted solid phase extraction for rapid, selective, and cost-effective sample pretreatment.     

Reproductive ability of second generation ornamental (koi) carp (Cyprinus carpio L.) × goldfish (Carassius auratus L.) hybrids and characteristics of their offspring

The purpose of this study was to investigate the reproductive ability of second generation (F₂) koi (Cyprinus carpio L.) × goldfish (Carassius auratus L.) hybrids. Only diploid F₂ males and females were fertile and used in crosses. A significant increase was recorded in male fertility in F₂ versus F₁. In contrast with an earlier study in which only one fertile F₁ male was found, about 20% of F₂ males produced sperm. The observed reproductive ability of F₂ hybrids was similar to that demonstrated by the only fertile F₁ male and F₁ females. F₂ males produced diploid spermatozoa and generated triploids when crossed with koi females. All triploid fish in these progenies were males indicating that F₂ males had a sex chromosome constitution of XY. F₂ females produced diploid eggs and generated mostly triploids when crossed with koi males. In progenies obtained by crosses of F₂ males with F₁ and F₂ females, most of the surviving juveniles (63%–100%) were diploid; a minority of juveniles were aneuploid (ploidy ranged from 2.1n to 3.6n). Diploid fish in these progenies were presumably the result of spontaneous androgenesis and gynogenesis, by the same mechanisms observed earlier in progenies obtained by crossing the F₁ male with F₁ females.     

有机物-金属相互作用对重金属负载土柱中粘土矿物吸附剂再生的影响

Natural clay minerals can play an important role in crude remediation of wastewater polluted with the heavy metals (HMs) Cu,Zn and Ni.The presence and timing of addition of natural dissolved organic matter (DOM) have a significant effect on the HM removal by clay mineral sorbents.However,the influence of the presence of DOM on the remediation of the used clay mineral sorbents once saturated with HMs is largely unknown.To resolve this,clay mineral-rich soil column of varying composition,loaded (i) with Cu,Zn and Ni only,(ii) first with DOM followed by Cu,Zn and Ni,or (iii) with DOM,Cu,Zn and Ni simultaneously,was used in a set of desorption experiments.The soil columns were leached with 0.001 mol L-1 CaCl2 dissolved in water as control eluent and 0.001 mol L-1 CaCl2 dissolved in DOM as treatment eluent.During the preceding loading phase of the sorbent,the timing of DOM addition (sequential or concurrent with HMs) was found to have a significant influence on the subsequent removal of the HMs.In particular when the column was loaded with DOM and HMs simultaneously,largely irreversible co-precipitation took place.Our results indicate that the regeneration potential of clay mineral sorbents in wastewater treatment will be significantly reduced when the treated water is rich in DOM.In contrast,in manured agricultural fields (where HMs enter together with DOM),HM mobility will be lower than expected from interaction dynamics of HMs and clay minerals.     

Development of a platform of antibody-presenting liposomes

Antibody-presenting liposomes present high interest as drug delivery systems. The association of antibodies to liposomes is usually realized by covalent coupling of IgGs or their antigen-binding fragments to lipid polar head groups by means of hetero-bifunctional crosslinkers. We present here an original platform of IgG-presenting liposomes which is based on a fusion protein between Annexin-A5 (Anx5) and the IgG-binding ZZ repeat derived from Staphylococcus aureus protein A. The Anx5ZZ fusion protein acts as a bi-functional adaptor that anchors IgGs to liposomes in a non covalent and highly versatile manner. The interactions between IgGs, Anx5ZZ and liposomes were characterized by PAGE, dynamic light scattering and fluorescence quenching assays, establishing that binding of Anx5ZZ to IgGs and of Anx5ZZ-IgG complexes to liposomes is complete with stoichiometric amounts of each species. We found that the sequence of assembly is important and that Anx5ZZ-IgG complexes need to be formed first in solution and then adsorbed to liposomes in order to avoid aggregation. The targeting capacity of Anx5ZZ-IgG-functionalized liposomes was demonstrated by electron microscopy on an ex vivo model system of atherosclerotic plaques. This study shows that the Anx5ZZ adaptor constitutes an efficient platform for functionalizing liposomes with IgGs. This platform may present potential applications in molecular imaging and drug delivery.     

A comparison of alternative modelling approaches to evaluate the European forest carbon fluxes

The European forest carbon balance studied by various methods shows different results. We compared the regional and national net primary production (NPP) estimated by the forest inventory-based model EFISCEN and the climate-based terrestrial ecosystem models (TEMs: BIOME-BGC, ORCHIDEE, and JULES), and single forests NPP derived from the international network of eddy-covariance towers (FLUXNET). In addition, the paper presents the net ecosystem production (NEP) and the net biome production (NBP) calculated with EFISCEN and discusses the influence of forest management onto carbon fluxes. We aimed to better understand the variance between EFISCEN and TEMs NPP estimates, and to improve the assessment of European forest mitigation potential for the year 2005.     

Genetic diversity of apricot revealed by a set of SSR markers from linkage group G1

Eight polymorphic simple sequence repeat (SSR) markers located in the G1 linkage group of apricot (Prunus armeniaca L.) were previously developed and evaluated in a small set of cultivars. Those primers were used for studying variability in 77 apricot cultivars belonging to five different geographical groups, such as Chinese, Asian (Irano-Caucasian and Central Asian), North American, Mediterranean and Western European as well as Middle European cultivars. Six of the markers were polymorphic and revealed a total of 71 alleles ranging from 5 (aprigms11) to 20 (aprigms1) alleles per locus with a mean value of 11.83 alleles per locus. In conclusion, the SSR loci located in the G1 linkage group show a level of polymorphism which is similar to loci dispersed throughout the entire genome. The total number of alleles and the number of unique alleles were the highest in Chinese apricots and the lowest in Middle European cultivars. Heterozygosity also showed a decrease from Asia and China to Middle Europe. No association could have been observed between any SSR markers tested and plum pox virus (PPV) resistant phenotype of cultivars. PPV resistant cultivars did not form a separate clade on the dendrogram obtained by UPGMA cluster analysis. Middle European and Chinese cultivars formed separate clusters while other genotypes formed smaller multiple sub-groups or scattered among different clusters. Our results support previous hypotheses on the origin of PPV resistance in North American apricots. The allele data was also presented in a form that allowed the easy observation of allele frequencies in each geographical group at each locus. Using this data field, differences and similarities between cultivar groups can be easily assessed. The analysis demonstrated the links between the North American and Mediterranean apricot germplasm and confirmed that the Chinese and Eastern European cultivars are distantly related.     

Zur Bekämpfung der SpinnmilbeTetranychus Althaeae v. Haerst. in Gehölzen der Moskauer Anlagen

Ohne Zusammenfassung