草鱼TAB1蛋白的原核重组表达及其抗体制备

为了制备草鱼重组TAB1蛋白(rCiTAB1)及其特异性抗体,首先以草鱼头肾组织c DNA为模板,PCR扩增Ci TAB1基因全长序列,并依次构建重组克隆质粒p MD19-T-Ci TAB1与重组表达质粒pET-32a-Ci TAB1。该重组表达质粒经0.5 mmol·L~(-1) IPTG,37℃诱导表达12 h后获得以包涵体形式表达的重组CiTAB1蛋白(rCiTAB1)。然后,采用3种不同方法对包涵体蛋白进行变性,发现与高浓度尿素直接变性法和洗涤后尿素变性法相比,洗涤后梯度尿素变性法处理后的蛋白纯度最好,经透析复性后得到浓度为2 mg·mL~(-1)的r Ci TAB1。最后,将rCiTAB1蛋白与白油佐剂及免疫增强剂混合,室温下混合1.5h乳化成免疫原,3次免疫新西兰大白兔制备兔抗CiTAB1抗体,经间接ELISA方法和免疫琼脂双向扩散试验测得免疫后第33天血清中特异性抗体的效价分别为1∶1 048 576和1∶16。Western blot检测到一条分子量约为72 kDa的特异性条带,表明该抗体能特异性识别r Ci TAB1蛋白。研究结果为后续深入研究CiTAB1蛋白功能提供了物质基础。     

On-site remediation of chromium-contaminated sediments by combination of sediment washing and stabilization with magnesium oxide/limestone mixtures

Goal, Scope and Background  The remediation of heavy-metalcontaminated soils and sediments is of significant value to industrial areas around the world. The spread of such pollutants can result in a potential risk of entering the groundwater system and being transported to potential receptors. Leaching techniques can be an effective treatment option for the metal removal from soils and sediments. This approach consists of washing or leaching the contaminated soil with an appropriate reagent and the subsequent treatment of the leaching in an above-ground installation (on-site treatment) where metals can be removed and concentrated into a smaller volume. Among the heavy metals, chromium is a commonly identified soil contaminant, particularly in sites with intensive economic activities including agriculture, industrial, mining and mineral,processing. Objective  The objective of this work was the evaluation and development of a leaching process for the remediation of soils and sediments polluted with chromium at laboratory scale. Chromium soil pollution was generated after the breakdown of a channel containing chromium wastes from a tannery plant. The pollution extension has been estimated to be on the order of thousands of tonnes of soil to be treated, with chromium contents ranging from 500 to 17,000 mg kg^-1 soil. Methods  The whole process investigated in this study integrates three stages; a) chromium leaching from a sediment using a diluted sulphuric acid solution, b) treatment of the leaching effluents with a magnesium oxide/limestone mixture for the precipitation of chromium hydroxide after acidity neutralisation, and c) polishing step to remove the eventual remaining chromium by adsorption onto natural zeolite. The amount of contaminated sediment treated ranged from 0.5 to 2 kg with chromium contents of between 2000 and 17,000 mg kg^-1. Results and Discussion  The paper describes results on the performance of the process and the optimisation of steps including influence of acid sulphuric concentration, chromium removal efficiency as well as alkaline reactive mixture proportions. Effluents from the leaching cells showed a significant decay on the chromium concentration with the increase of leaching runs and a high content of acidity (pH values close to 0.5). The treatment of these effluents in a second cell containing magnesium oxide/ limestone mixtures resulted in a high efficiency in neutralisation of acidity (pH values around 7) and chromium removal (concentrations below 5 mg 1^-1). The passage through a third compartment containing zeolite as an adsorbent decreased the chromium concentration below 0.5 mg 1^-1, Conclusions  From the results obtained on the chromium leaching and immobilisation with magnesium oxide/limestone mixture at a laboratory scale, it could be pointed out that: (a) diluted sulphuric acid solutions (3%) demonstrated a high efficiency on chromium removal from sandy polluted soils on the kilogram scale, (b) mixtures of magnesium oxide/limestone demonstrated a high capacity to neutralise the residual high acidity present on the effluents and to remove chromium by precipitation and (c) between the limestone and caustic magnesia mixtures, those containing more than 60% of caustic magnesia provide the higher efficiency. Recommendation and Outlook  Future work would be directed to the evaluation of the integrated process of leaching and chromium precipitation on column at a scale of 100 to 1000 kg.     

柠檬酸强化低浓度EDTA对成都平原农田土壤铅和镉的淋洗效率

为了寻找绿色高效的土壤重金属修复技术,研究了柠檬酸与低浓度EDTA不同组合方式对成都平原两类污染农田土壤中Pb和Cd的淋洗率,并测定了淋洗前后土壤中有机质和基础养分含量。结果表明,EDTA单独淋洗时对水稻土Pb、Cd的最高淋洗率为44.94%和88.32%,对紫色土Pb、Cd的最高淋洗率为48.48%和71.85%。柠檬酸单独淋洗时对水稻土Pb、Cd的最高淋洗率为24.71%和69.38%,对紫色土Pb、Cd的最高淋洗率为33.54%和59.77%。柠檬酸与低浓度EDTA复合淋洗效果均优于单独淋洗,其中先EDTA再柠檬酸淋洗组合效果最好。相较于EDTA单独淋洗,该组合方式将水稻土中Pb、Cd的淋洗率分别提高了6.07%和9.67%,将紫色土中Pb、Cd的淋洗率均提高了10.33%和14.73%。同时,复合淋洗还能减少10%以上的土壤有机质与基础养分的流失。综合淋洗效率和土壤有机质及养分的变化,先用EDTA淋洗再用柠檬酸淋洗是最佳淋洗组合。     

IWF诱导小麦悬浮细胞产生NO及其与Ca2+的关系

 【目的】以感染叶锈菌的小麦叶片细胞间隙液IWF-260作为激发子,刺激小麦洛夫林10悬浮细胞,探讨悬浮细胞受激发子刺激引发的NO变化情况及其产生的可能分子机制。【方法】采用Greiss试剂法及荧光分子探针DAF-2DA标记法检测胞内NO的动态变化,同时借助药物学试验探讨Ca2+和NO的关系。【结果】IWF-260能诱导小麦悬浮细胞产生NO,NO在IWF-260刺激诱发的细胞死亡过程中发挥重要作用。药物学抑制剂试验证明NOS和NR及胞外钙离子内流均与IWF-260刺激小麦悬浮细胞产生的NO有密切关系,且在NO的产生途径中,NR途径为主要途径。【结论】IWF-260能够诱导小麦悬浮细胞产生NO,NOS、NR及胞外Ca2+内流参与了此过程。     

4种植物水浸提液对铅镉污染土壤的淋洗效果

为探讨植物水浸提液淋洗去除土壤中重金属的可行性,选用驳骨丹（Buddleja asiatica）、茵陈蒿（Artemisia capillaries）、假酸浆（Nicandra physaloides）和紫茎泽兰（Eupatorium adenophora）4种植物材料的水浸提液作为淋洗剂,分析不同淋洗剂浓度、pH和淋洗时间对去除土壤中重金属铅（Pb）和镉（Cd）的影响。结果表明,4种植物淋洗剂对2种土壤中Pb和Cd均具有一定的去除作用。随着淋洗剂浓度的增加,其对土壤中Pb和Cd的淋洗效率总体呈上升趋势;随淋洗剂pH的增大,淋洗率总体呈降低趋势;而随淋洗时间的增加,4种植物的Pb和Cd淋洗率呈总体增加、先增后减和无显著变化等3种趋势。驳骨丹对土壤A中Cd（72.45%）和Pb（13.27%）的去除率最高,对土壤B中Pb（17.27%）去除率最高;紫茎泽兰对土壤B中Cd（59.81%）的去除率最高。研究表明,驳骨丹和紫茎泽兰具有较好的治理重金属污染土壤的潜力。     

不同土壤有机碳测定方法的比较

对土壤碳的准确定量是研究土壤肥力和农业固碳的前提。本文选择我国不同有机碳和无机碳含量的8个代表性土壤/沉积物样品,比较湿氧化法、酸洗法和间接法三类方法对有机碳含量的测定效果。研究结果表明:对有机碳含量为3.4~11.5 g/kg的土壤和沉积物样品,湿氧化法有较低的平均相对误差(0.32%~4.72%)和变异系数(0.40%~1.22%),间接法的平均相对误差(5.16%~20.46%)和变异系数(0.60%~7.00%)都较高,而酸洗法介于这两个方法之间。说明在保持稳定准确的加热温度情况下,湿氧化法对土壤/沉积物有机碳含量的测定比较稳定和准确,且操作简单。对大部分样品,由于酸对土壤无机碳难以充分溶解,造成酸洗法和间接法的有机碳测定值偏高,且变异系数较大。     

表面活性剂淋洗修复土壤中重金属污染研究进展

随着工业的不断发展,土壤重金属污染问题日益严峻,寻找到一种高效处理重金属污染土壤的方法刻不容缓。土壤淋洗是土壤修复的一种重要方法,其中表面活性剂作为一种相对环保的处理剂被广泛地应用在土壤淋洗之中。文章概括了土壤重金属的修复方法与表面活性剂的种类,阐述了表面活性剂淋洗土壤的机理,总结了不同类型表面活性剂淋洗土壤重金属的应用,最后对表面活性剂淋洗土壤中重金属的应用前景与发展趋势进行了展望。     

纳米磺化石墨烯用于异位洗脱污染土壤多环芳烃工艺的优化

Ex-situ soil washing technology offers advantages such as speed and efficiency of remediation and range of application and has been developed to conform with legal requirements and best management practices in USA and some European countries. In this study,nano-sulfonated graphene(SGE) was used as a washing agent to evaluate different processing(washing) parameters for the ectopic leaching removal of polycyclic aromatic hydrocarbons(PAHs) from a coking plant soil. X-ray photoelectron spectroscopy(XPS) and fourier transform infrared spectroscopy(FTIR) were used to analyze the characteristics of the SGE tested. The results showed that SGE had a strong adsorption capacity for PAHs through the role of π-π, H-π, and anion-π interactions. The washing parameters, an SGE concentration of 2 000 mg L~(-1), a liquid/soil(L/S) ratio of 10:1, and 4 cycles of successive washing, were set to arrive to the optimum condition for achieving more than 80% of PAH removal. Under the optimum condition, the PAH removal rate decreased with increasing ring numbers. After one washing cycle at SGE concentration of 2 000 mg L~(-1) and L/S ratio of 10:1, the PAH removal rate of the SGE tested was much higher than that of Tween 80(TW80) or methyl-β-cyclodextrin(MCD)(P 0.01). Therefore, SGE is a promising material for the nanoremediation of PAH-contaminated soils.     

Sustainable Food Supply Chains

Abstract

The effects of washing on the chemical composition, gel-forming ability and color of Monterey sardine mince were investigated. Recoveries were 41.5, 46.3 and 52.1% for solids and 49.9, 52.7 and 59.9% for protein using washing ratios of 1:20, 1:15 and 1:10, respectively. No differences were detected among the washing treatments except for gel cohesiveness as measured by texture profile analysis. Large variations in muscle composition were observed at different months of harvesting which could preclude the effect of washing on the characteristics of the mince. Results showed that washed mince possesses an excellent gel-forming ability, suggesting that sardine could be used for surimi processing.     

不同方法检测乳品预制塑料容器中微生物的比较研究

研究不同检测方法反应出的容器污染情况,采用发酵法、滤膜法以及涮洗法对乳品塑料预制瓶容器在不同贮存时间和不同污染程度所产生微生物进行检测.结果表明:发酵法不能全面反应出容器的污染情况,涮洗法和滤膜法的采样方式更全面,能更好地反应污染情况.但滤膜法不适用于高污染的环境下的检测.因此,涮洗法更适合在工业化生产中用于批量检测.