贵州省食用菌产业现状与可持续性发展分析

笔者分析了贵州省食用菌产业特点与产业优势,认为贵州食用菌产业在自然条件、交通条件以及政策条件等方面均具有较大优势;全省食用菌规模逐渐扩大,品牌效应凸显。进一步总结了贵州省食用菌产业存在的问题,即缺乏行业规范,产品结构较为单一,行业人才匮乏。继而提出了贵州省食用菌产业可持续性发展建议,即加大食用菌产业的开发程度,加强科技支撑及专业人才培养,政府统筹,建立行业标准,重视菌渣的综合开发利用,以实现本省食用菌产业的后发赶超和可持续性发展。     

叶轮出口边对双蜗壳泵压力脉动的影响

泵的叶轮扫掠蜗壳隔舌时产生的压力脉动是引起船用泵振动噪声的原因之一.为尽可能弱化这一影响,分别设计了叶片出口边与前后盖板基本面垂直和倾斜的2种不同形式叶轮,将其配置在相同的双蜗壳中,通过数值计算与样机试验相结合的手段,对蜗壳内9个不同位置的压力脉动情况进行对比分析.结果表明:出口边倾斜的叶轮相比于出口边垂直的叶轮可明显改善蜗壳内次脉动的“驼峰”现象,且可以进一步降低隔舌处主波动的压力峰值;对蜗壳内2个隔舌稍前的位置,出口边倾斜的叶轮反而会使得该点的压力系数幅值明显增大,且该点主波动的周期数发生改变;2种叶轮出口边的不同形式对蜗壳出口位置的压力脉动的影响基本相同;采用出口边倾斜叶轮对改善因叶轮与隔舌间的液流压力脉动是可行的.     

减氮条件下密度对望两优361产量的影响

为探索减氮条件下密度对望两优361产量的影响,2018年在马庙镇进行了该试验。试验结果表明：怀宁县单季稻施肥量应为：N:P:K=13.5:5.4:10.8。在此施肥量的基础上： 1.5万穴/667m_²为最佳移栽密度。     

有初始缺陷板件超屈曲强度的半分析法研究

本文应用大挠度理论分析了初始缺陷对板件超屈曲强度的影响,并为板件后屈曲分析提出了一个样条函数半分析计算法.该法对各种载荷及位移边界条件板件均可进行计算,与有限元法等相比较,具有计算量少,精度高等显著特点.数值计算结果为冷弯型钢结构设计提供了较完善的理论依据.     

土壤养分位与广义氧化还原电极电势

 根据广义氧化还原理论,给出了土壤溶液中NH₄⁺,P,Ca等养料成份的广义氧化还原电极电势。与养分位比较,用广义氧化还原电极电势来量度土壤养分有效度具有较多的优越性。     

甲醛捕捉剂在胶合板生产中的应用

普通UF树脂胶中添加甲醛捕捉剂H300或H800后,其固化时间明显延长.采用H300或H800改性的UF醛树脂胶黏剂生产胶合板,在保证胶合强度的前提下,板材的甲醛释放量达到国标E2或E1级要求.     

改善E1级胶合板用UF胶粘剂预压性能的研究

利用氧化淀粉在树脂合成后期、API在调胶时加入分别对脲醛树脂进行改性，探讨改性UF对胶合板预压强度的影响。采用正交实验法对比改性后胶合板的预压性能和改性后胶合板的甲醛释放量的变化。结果表明：随着API量的加大，胶合板的预压性能得以提高；而氧化淀粉改性后则随着量的加大，一定范围内胶合板的预压性能得以提高，加入量继续加大后反而下降。     

Influence of death struggle on the structural changes in chub mackerel muscle during chilled storage

ABSTRACT: Chub mackerel (34–35 cm, approximately 500 g), which were caught by fishing with a rod and line at the Bungo Channel, Oita prefecture, were rested overnight in a fish preserve and either killed by decapitation (control group) or allowed to struggle in air for 30 min (struggled group). Muscle samples were excised every 4 h, and measurements on breaking strength and histological observations were done for both groups. The breaking strength of muscle in the control group was significantly higher than that in the struggled group, whereby a decrease in breaking strength was delayed for 12 h compared to the struggled group. Light microscopy showed space extension among muscle cells in association with a decrease in breaking strength. Especially in the struggled group, the extended area was larger and the difference in area was significant at the time when breaking strength showed a significant difference. Using electron microscopy, the extended area showed cut and/or disappeared collagen fibrils. From these results, it was demonstrated that struggling to death promoted the degradation of collagen fibrils and the weakening of connective tissue and, resultantly, led to the faster softening of muscle of chub mackerel.     

Application of acoustic Doppler current profiler combined with a scientific echo sounder for krill Euphausia pacifica density estimation

ABSTRACT:   An application of the acoustic Doppler current profiler (ADCP, 153.6 kHz) in combination with a scientific echo sounder (EK60, 38 and 200 kHz) was investigated to estimate the density of krill Euphausia pacifica . The acoustic backscattering strength from sound scattering layers was compared with biomass estimates from midwater trawls. Euphausia pacifica was targeted among mixed species populations in the sound scattering layer in the offshore Funka Bay area of Hokkaido, Japan. The frequency characteristics of acoustic backscattering by krill were calculated using a distorted wave Born approximation scattering model at three frequencies. Krill aggregations identified from the EK60 data were extracted as the mean volume backscattering strength difference between two frequencies. They were then used to identify similar aggregations in the ADCP data by matching observation times and depths for the two methods, which were applied simultaneously. Results from the comparison of the mean volume backscattering strength and the density calculated from the ADCP and EK60 showed that ADCP can be used to measure density and spatial–temporal distribution of krill aggregations. Current speed and direction at the study site were found to be 16.1 cm/s and 187.0°, respectively, and krill speed and direction (including the current component) were found to be 19.8 cm/s and 172.2°, respectively. Based on the ADCP data, the net speed and direction of the krill aggregations were found to be 5.9 cm/s and 128.0°, respectively.