Application of acoustic Doppler current profiler combined with a scientific echo sounder for krill Euphausia pacifica density estimation

ABSTRACT:   An application of the acoustic Doppler current profiler (ADCP, 153.6 kHz) in combination with a scientific echo sounder (EK60, 38 and 200 kHz) was investigated to estimate the density of krill Euphausia pacifica . The acoustic backscattering strength from sound scattering layers was compared with biomass estimates from midwater trawls. Euphausia pacifica was targeted among mixed species populations in the sound scattering layer in the offshore Funka Bay area of Hokkaido, Japan. The frequency characteristics of acoustic backscattering by krill were calculated using a distorted wave Born approximation scattering model at three frequencies. Krill aggregations identified from the EK60 data were extracted as the mean volume backscattering strength difference between two frequencies. They were then used to identify similar aggregations in the ADCP data by matching observation times and depths for the two methods, which were applied simultaneously. Results from the comparison of the mean volume backscattering strength and the density calculated from the ADCP and EK60 showed that ADCP can be used to measure density and spatial–temporal distribution of krill aggregations. Current speed and direction at the study site were found to be 16.1 cm/s and 187.0°, respectively, and krill speed and direction (including the current component) were found to be 19.8 cm/s and 172.2°, respectively. Based on the ADCP data, the net speed and direction of the krill aggregations were found to be 5.9 cm/s and 128.0°, respectively.     

Dyeability of Chemically Treated Wood and its Discoloration by UV-ray Irradiation

INTRODUCTION Wood is far from a stable material. One of the biggest challenges for woodworking is learning to work within the constraints of wood properties. Discoloration of wood directly influences the decorative performance of wood products. Therefore, the degree of color change is a critical factor that determines the utilization area of dyed wood (Sakuragawa Satoshi, 1996). Discoloration has occurred because the wood components and dye molecules are degraded by UV-ray (Kaneko Shin…     

In Vitro Suppression of Mycelial Growth of Fusarium oxysporum by Extracellular Chitosanase of Sphingobacterium multivorum and Cloning of the Chitosanase Gene csnSM1

A chitosan-degrading bacterium, isolated from field soil that had been amended with chitin, was identified as Sphingobacterium multivorum KST-009 on the basis of its bacteriological characteristics. The extracellular chitosanase (SM1) secreted by KST-009 was a 34-kDa protein and could be purified through ammonium sulfate precipitation, gel permeation column chromatography and SDS polyacrylamide gel electrophoresis. A chitosanase gene (csnSM1) was isolated from genomic DNA of the bacteria, and the entire nucleotide sequence of the gene and the partial N-terminal amino acid sequence of the purified SM1 were determined. The csnSM1 gene was found to encode 383 amino acids, 72 N-terminal amino acid residues were processed to produce the mature enzyme during the secretion process. Germinated microconidia of four formae speciales (lycopersici, radicis-lycopersici, melonis, and fragariae ) of Fusarium oxysporum were treated with SM1. Chitosanase treatment caused morphological changes, such as swelling of hyphal cells or indistinctness of hyphal cell tips and cessation or reduction of mycelial elongation. Received 2 May 2001/ Accepted in revised form 21 June 2001     

Viscoelastic properties of wood from Chinese-fir and poplar plantations

Elastic and strength properties(proportional-limit stress(σ prop ),Young's modulus(E),breaking stress(σ max )in static bending parallel to grain in a longitudinal direction),as well as stress relaxation in air-dried condition and water-saturated conditions at seven different constant temperatures and increasing and decreasing temperatures were investigated for wood from Chinese-fir and poplar plantations.The results show that hygrothermal conditions considerably affect these mechanical properties.The higher the moisture content(MC)or temperature,the lower the strength of wood.Further investigation of the effects of constant temperature on stress relaxation indicates that high temperature specimens have low relaxation moduli and high fluidity.In the case of increasing temperature the range of the modulus of relaxation is larger than in the case of a reduction in temperature,while the residual moduli do not show large differences.This is because the modulus at high temperatures decreases more than that at low temperatures.The fluidity of specimens in a state of water desorption increases slowly at the beginning,increases quickly until the MC reaches an equilibrium moisture content(EMC)and then becomes stable,which is quite different from that in a water-saturated state.Fluidity in a desorption state is much higher than in a water-saturated state.This is probably due to the fact that the former is in an unstable state which can be interpreted as a state with internal strain and has therefore a greater potential to release strain.     

Characterization of ISPsy2 and ISPsy3, Newly Identified Insertion Sequences in Pseudomonas syringae pv. eriobotryae

Two new active insertion sequences, ISPsy2 and ISPsy3, were isolated from Pseudomonas syringae pv. eriobotryae, the causal agent of stem cankers of loquat trees. ISPsy2 is 1194-bp long, has 16-bp imperfect terminal inverted repeats, and generates a 4-bp target site duplication upon insertion into the selective cartridge of the entrap vector pSHI1063. The nucleotide sequence of ISPsy2 is completely identical with that of the previously identified IS-like element located adjacent to the virulence gene psvA of Pseudomonas syringae pv. eriobotryae NAE6. The single open reading frame of ISPsy2 encodes a 323-amino-acid protein that has similarity to the transposase of the IS5 subgroup of the IS5 family. The ISPsy3 belonging to the IS91 family is 1507 bp in length, does not duplicate its target sequence, GAAC, and presents an 81% sequence homology with IS801 in P. s. pv. phaseolicola. The transposase of ISPsy3 possesses the conserved amino acid motifs found in the rolling-circle replication protein. Southern blot analysis indicated that multiple copies of ISPsy2 and ISPsy3 are present in the genomes of P. s. pv. eriobotryae and some of the other P. s. pathovars tested. Received 16 August 2001/ Accepted in revised form 19 October 2001     

Target strength estimation of black porgy Acanthopagrus schlegeli using acoustic measurements and a scattering model

ABSTRACT:   Black porgy are hatched and released in marine ranching areas in Japan, Korea and Taiwan to maintain fisheries resources in coastal areas. If acoustic methods are used for field surveys, target strength ( TS ) information on the species is needed to convert acoustic data to biomass density. Target strength of black porgy ( Acanthopagrus schlegeli ) 15.5–32.9 cm fork length (nine individuals) was measured at 38 and 120 kHz (split beam) by ex situ measurements (cage and fishhook methods) of living fish, a tethered method with shock-frozen fish, and an acoustic scattering model, the Kirchhoff ray mode (KRM) model based on fish morphology. The ex situ TS -to-fork length ( FL , cm) relationships were TS _38kHz = 20log₁₀ FL  − 64.6 ( r  = 0.77) and TS _120kHz = 20log₁₀ FL  − 65.2 ( r  = 0.70). The values for the KRM model were TS _38kHz = 20log₁₀ FL  − 64.8 ( r  = 0.88) and TS _120kHz = 20log₁₀ FL  − 65.4 ( r  = 0.80). The agreement between the ex situ measurements and the KRM model for the mean TS was very good. In contrast, the results for the tethered method ( TS _38kHz = 20log₁₀ FL  − 69.3 [ r  = 0.42]) differed markedly from the other two methods, perhaps because of the effects of the shock-freezing procedure in air. The results of the ex situ measurements and scattering model provide basic information for studying TS and conducting acoustic surveys of black porgy, even though the tethered method must be modified.