景谷县森林蓄积量遥感估测及其动态变化分析

以云南省景谷县为研究区,基于Landsat5和Landsat8遥感数据,利用2012年和2017年两期全国森林资源连续清查实地调查数据,建立多元逐步回归和随机森林模型对景谷县森林蓄积量进行遥感估测对比研究。结果显示:综合建模精度来看,随机森林法在相同样地数量条件下具有更好的估测效果;从估测结果与林地保护利用规划和林地变更数据结果相比较,随机森林法估测值接近真实值,估测精度较高。     

基于GF-1和Sentinel-2时序数据的茶园识别

由于茶园大多分布在地形复杂的山区,地块破碎,分布零散,形状差异大、植被混杂且茶园所处环境长期受到云雨的影响,增加了茶园遥感识别的难度与不确定性,针对这一问题,该研究提出了利用高分1号(GF-1)和哨兵2号(Sentinel-2)时序数据提取茶园的方法,以浙江省武义县王宅镇为研究区,采用GF-1号为主要数据源,并利用MODIS地表反射率产品和Sentinel-2反射率数据,基于时空融合算法得到时间分辨率5 d的10 m Sentinel-2完整的时序数据。综合利用GF-1在空间细节方面的优势和重建的Sentinel-2高观测频率时序数据在反映茶树生长过程方面的优势,分别基于GF-1的光谱和纹理特征及GF-1的光谱、纹理特征和Sentinel-2时序特征两种特征组合方式,采用随机森林算法提取茶园。结果表明,GF-1光谱、纹理信息结合Sentinel-2时序信息分类结果的准确率、错误率、精确率、召回率和F1分数分别为96.91%、3.09%、89.00%、83.09%和0.86,仅基于GF-1光谱和纹理信息的分类准确率、错误率、精确率、召回率和F1分数分别为94.72%、5.28%、73.09%、84.61%和0.78,添加时序信息分类结果总体优于未添加时序信息的分类结果。表明高空间分辨率结合高频率时序遥感数据是提高茶园分类精度的有效手段。     

棉田土壤养分分析与土壤墒情监测系统应用

【目的】研究土壤养分的空间变异程度及分布规律,为该区域科学施肥提供依据。【方法】以新疆生产建设兵团第八师石河子总场六分场数字农业示范田为研究区域,应用土壤墒情监测系统、GIS与地统计学的方法,对棉田土壤含水量与温度进行实时采集、分析并存储在服务器里面,分析石河子总场土壤含水量和温度变化规律、棉田土壤养分空间分布特点及变异规律。【结果】(1)根据监测数据分析,随着灌水量增加和棉花生育期推进,上层0~30 cm比下层40~60 cm的土壤含水量变化趋势明显。0~20 cm土层土壤补偿水比较充分,各个监测点土壤含水量基本维持在比较适宜的范围内。土壤各层温度受大气温度影响并随着土层深度的加深而减弱,随着土层深度的逐渐加深滞后时间相对延长;受棉株逐渐长高变大以后遮阴等造成的影响,7月以后各土层温度逐渐持平,波动不大。(2)土壤全氮、速效磷和速效钾均呈现出中等程度变异;(3)土壤速效钾的块金值在25%~75%(块金值为0.497)表现为中等空间自相关性外,土壤全氮、速效磷指标的块金系数小于25%表现为强烈的空间自相关性。【结论】应用土壤墒情实时监测系统指导棉田灌溉,较往年没有任何减产减质的情况下,棉花灌溉在全生育期内比以往灌溉次数下降了1~3次,节约水资源约20%左右。研究区域内土壤全氮、速效磷和速效钾变异呈现中等程度变异特征,全氮、速效磷表现为极强空间自相关性,速效钾表现为中等强度的空间相关性。     

毛竹销（钉）的高速旋转摩擦焊接性能研究

选取毛竹销钉替代木榫在1 500 r/min的情况下与榉木基材进行旋转摩擦焊接，对其抗拉强度和焊接机理进行研究。重点研究不同形状的预钻孔和不同榫径与孔径比值下的竹销钉焊接抗拉拔强度，并将其与木榫焊接和PVAc胶接的抗拉强度进行对比。结果表明:1）当采用恒定直径孔10/9、10/8、10/7、10/6 4种榫径/孔径比的焊接强度均高于PVAc胶接强度，但低于木荷榫和榉木榫的焊接强度，其中10/8的榫径/孔径比的焊接强度相对最高，达到了5.54 MPa；2）当采用渐变直径孔，竹销钉的焊接强度得到明显提高。其中10/8-6的榫径/渐变孔径比值取得了最高的焊接强度，达到6.42 MPa，比10/8比值的强度提高了15.6%，超过了木荷榫的焊接强度，但不及榉木榫的焊接强度；通过对竹销钉的焊接界面温度进行监测，发现焊接界面能在2 s内达到300℃以上的峰值高温，且维持了一定的高温时间（通常约2～3 s），随后随着竹销停止旋转摩擦，温度逐步下降；不同的榫径与孔径比值下，焊接界面的升温速率、峰值温度和高温持续的时间不同，它们是产生强度差异的主要原因；SEM观察结果显示，竹销旋转摩擦焊接界面由竹销或基材中的胞间层物质软化、熔化和流动并与作为增强材料的竹纤维包裹，形成了犹如“钢筋水泥土”结构般的致密、连续和坚固的焊接界面；FTIR分析结果表明，摩擦产生的高温会导致竹销中半纤维素发生一定程度的降解，纤维素的降级十分有限，木质素发生一定程度的缩合反应，木质素的含量相对提高。试验结果表明，将竹销钉代替木榫用于木材的旋转摩擦焊接是可行的。     

广西某食蟹猴规模化养殖场饮用水和青饲料卫生质量监测

为了对广西某规模化食蟹猴养殖场饮用水和青饲料卫生质量情况进行监测,对饮用水和青饲料进行连续抽样监测,按照《生活饮用水卫生标准》《生活饮用水卫生标准检验方法》和《国家禁用和限用的农药名单》进行检测与评价。结果显示:抽取6份饮用水样检测26项理化指标,有3份不合格,超标率达50.0%,超标指标有浑浊度、肉眼可见物;抽取147份饮用水检测微生物指标,有22份超标,超标率达15.0%,超标微生物指标为细菌总数、总大肠菌群、耐热大肠菌群和大肠埃希氏菌;抽取13个品种青饲料48份检测10种禁用农药残留情况,甲胺磷、敌敌畏、乐果、氧化乐果、氰戊菊脂、多菌灵、啶虫脒、吡虫啉、三唑磷、毒死蜱检出率分别为2.1%、0、0、0、0、12.5%、2.1%、12.5%、2.1%、2.1%。说明该规模化食蟹猴养殖场饮用水存在不合格情况,青饲料检出农药残留。     

An acoustic based approach to evaluate the effect of different diet lengths on feeding behavior of Litopenaeus vannamei

Studying shrimp feeding behavior is challenging and, traditionally, studies have been using direct visual observation or video recordings with image analysis under laboratory conditions. Passive acoustics monitoring (PAM) is a non-invasive approach to study feeding behavior of penaeids, as their mandibles emit clicking sounds during feed ingestion. Considering the wide variation available in shrimp diet lengths, our knowledge is still limited about their effects on feeding behavior. The present study was designed to use acoustics to evaluate the feeding behavior of Litopenaeus vannamei fed different diet lengths. A commercial pelleted diet with similar diameter (2.4 mm) and three different lengths was used as treatments “small” (2.35 mm), “medium” (4.26 mm) and “large” (8.42 mm). Three separate trials were performed with fastened shrimp (20 g), using omnidirectional hydrophones and external audio recorders. Our approach started with the characterization of the click acoustic parameters produced by three shrimps when fed the different diet lengths in anechoic chambers (15 L). We then analyze the number of clicks produced per pellet and duration of the clicking activity when shrimp fed a single pellet in individual tanks (1 L). Finally, the acoustic energy of feeding activity and feed consumption, as well as theirs relationship to predict feed intake was evaluated in aquaria (70 L) with five shrimps. The acoustic parameters of isolated clicks were not affected by the different diet lengths, however, doubling the length of the pellet resulted in doubling the number of clicks emitted during feeding activity. The duration of clicking activity per pellet indicated that small pellets are consumed 2.9 and 4.7 times faster than medium and large pellets, respectively. Furthermore, feeding acoustic energy of small pellets decreased rapidly after feed offer, as their faster consumption probably contributed to shrimps achieved satiety earlier than larger diets. Feed consumption was similar among diets length, but significantly correlated with the feeding acoustic energy emitted by L. vannamei, which is a breakthrough in feeding behavioral research. The results highlight the potential and possibilities of an acoustic approach to estimate feed consumption, as well as an alternative to traditional methods in feeding behavioral studies to improve efficiency of feed management.     

基于多反应监测质谱技术的水稻叶片蛋白绝对定量方法

【目的】建立水稻叶片蛋白的多反应监测(MRM)质谱绝对定量方法。【方法】水稻叶片蛋白经含1.0%十二烷基硫酸钠(SDS)的磷酸盐(PBS)缓冲液提取,丙酮沉淀除杂纯化、胰蛋白酶消化,酶解液经液相色谱分离,MRM质谱监测,外标法定量。【结果】向提取缓冲液中加入1.0%SDS可增强水稻叶片中16种靶蛋白和总蛋白质的提取效果;不同有机试剂处理,总蛋白质沉淀量存在显著差异(P<0.05),沉淀能力从强到弱依次为乙腈>丙酮>异丙醇>甲醇>乙醇;对于16种目标蛋白,总体以丙酮沉淀效果最好,其次是异丙醇和乙腈,甲醇和乙醇效果较差。该方法线性范围均达到3个数量级,定量限为0.1~2.5 nmol/L,灌浆期16种水稻叶片蛋白质含量为6.0~2818.1μg/g,相对标准偏差均小于14%。【结论】SDS可显著提高水稻叶片蛋白提取效果,采用丙酮或乙腈可获得较好的蛋白沉淀效果,但不同蛋白质略有差异。结合MRM质谱监测技术可实现水稻叶片蛋白的绝对定量,方法线性范围宽、敏度高、重复性好。     

System for quasi‐continuous simultaneous measurement of oxygen diffusion rate and redox potential in soil

Oxygen diffusion rate (ODR) and redox potential (E_H) are quantitative indices representing oxygen availability and redox status in soils, which is valuable information for better understanding causes and effects of soil aeration. Because these indices are spatially and temporally highly variable, continuous measurements and adequate numbers of repetitions are essential for accurate in situ monitoring. Here, we present a new, fully automated recording system for in situ measurements where ODR and E_H are measured at the same platinum electrode. The conflict between electrode polarization for ODR and the resulting biased E_H readings is solved by reducing the polarization time and introducing a recovery interval between two consecutive measurement cycles. The shorter polarization time ensures accurate E_H readings. It also results in moderately overestimated ODR readings, but this can be corrected before data analysis. The recovery interval restricts temporal resolution of the E_H‐ODR data pairs to 8 h. We illustrate the use of the system with measurements in a field experiment in Zürich, Switzerland. ODR curves at different depths ran roughly parallel to the corresponding curves of O₂ concentration in soil air but ODR was much more sensitive to precipitation. Low ODR was a necessary but not a sufficient condition for declining E_H. E_H ran parallel to O₂ concentration in soil air rather than to ODR. The fully automated system allows for time series of replicate measurements in multifactorial field studies with reasonable labor requirements. It may be particularly suitable for studies examining the effects of soil tillage, compaction, and irrigation, where structure‐related soil properties such as porosity, gas permeability, and soil aeration play a dominant role.     

基于多源遥感数据的河套灌区干旱时空演变特征

利用中国气象局陆面数据同化系统（CLDAS）验证了2015—2016年土壤水分主动-被动微波数据集（SMAP）在河套灌区的适用性，基于土壤水分亏缺指数（SWDI ）和干旱周百分比（PDW）分析了作物生育期内灌区农业干旱时空演变规律，通过两个参考指标检验了SWDI在河套灌区的精度。结果表明：（1）SMAP在河套灌区的适用性较好；区域尺度上，SMAP和CLDAS的相关系数为0.65；栅格尺度上，约有69%的栅格表现良好（R>0.5），且多集中在灌区西南部和东北部。（2）严重干旱主要发生在4月下旬到5月中旬、7月下旬到8月下旬以及9月中旬到10月中旬，主要集中在灌区的西南部、中部和东部；2015—2016年PDW值略有增大，干旱事件的持续时间有所延长。（3）大气水分亏缺量（AWD）表征的气象干旱在时间上显示2 a内灌区干旱月份为5—8月；空间上，除去地形原因，SWDI和AWD的相关性较为显著，且有一半格点通过了显著性水平为0.01的显著检验，表明基于SWDI对河套灌区进行干旱状况分析具有较高的可信度。     

基于无人机与激光测距技术的农田地形测绘

平整地技术是提高作物单产的重要措施，而获取高精度的农田地形测绘数据与农田数字地形模型，是进行精准平整地作业的必要条件。为了解决传统接触式地形测绘效率低、基于航拍摄影技术的遥感地形测绘精度差及作业成本高等问题，该研究提出了一种基于多旋翼无人机与激光测距技术的农田地形测绘方法。在多旋翼无人机测绘平台上搭载激光测距模块与后处理动态差分全球定位系统设备（Post-Processing Kinematic Global Positioning System，PPK-GPS），获取激光测距序列、PPK-GPS三维定位数据以及无人机的飞行姿态数据。首先使用均值滤波器处理原始激光测距序列，并将得到的激光测距序列与PPK-GPS定位数据进行同步处理，使二者建立空间对应关系。根据无人机倾斜状态时的测距激光方向与理论竖直方向的空间几何关系，使用从无人机的飞行控制器中提取的姿态信息校正激光测距序列，消除无人机平台在飞行过程中俯仰与横滚姿态变化对激光测距精度的影响。最后，根据PPK-GPS定位数据的海拔高度分量与激光测距序列计算试验地块内地面测量点的海拔高度，共获取1 417组地面测量点的有效测绘数据。利用手持PPK-GPS设备对地面测量点的海拔高度进行测绘精度检验。验证试验结果表明，本文提出的无人机农田地形测绘系统获取的海拔高度与手持PPK-GPS设备采集的海拔高度的均方根误差为5.2 cm，表明该无人机农田地形测绘系统具有较高的测绘精度。与利用手持GPS设备进行地形测绘作业的方法相比较，本文提出的无人机农田地形测绘系统具有自动化程度高、作业效率高等优点。该研究可为促进精准平整地技术的大规模应用提供数据支持。