植物生长调节剂对忍冬科植物生根的影响

【目的】为提高忍冬科(Lonicera)植物在兰州地区的扦插成活率,缩短其生根时间和育苗周期.【方法】以3种忍冬科植物为材料,研究不同质量浓度(50、100 mg/L)下3种植物生长调节剂吲哚乙酸(IAA)、吲哚丁酸(IBA)和萘乙酸(NAA)在不同处理时间(30、60min)对其扦插生根的影响.【结果】IAA和IBA对天目琼花生根率的影响最大,对金叶接骨木生根数量的促进作用最大,对天目琼花和蓝叶忍冬根的伸长具有抑制作用.NAA对金叶接骨木、天目琼花、蓝叶忍冬的生根率的促进作用不显著(P0.05),对金叶接骨木和蓝叶忍冬根伸长的促进作用不显著(P0.05),但对天目琼花根的伸长具有显著的促进作用(P0.05).在进行苗木扦插繁殖时,为获得较理想的扦插效果,要根据所采集母条的生长特性在特定的时间采集半木质化的嫩枝,同时选用适当的植物生长调节剂和质量浓度,以提高扦插的成活率.【结论】3种植物生长调节剂对3种忍冬科植物的生根率、生根数量及根长的影响存在差异.     

插条粗度和萌芽度对降香黄檀扦插成活率的影响

在江门市林科所苗圃选择不同粗细度、不同萌芽度的降香黄檀插条进行扦插繁殖试验,每10 d进行1次成活率调查。结果表明:插条的萌芽度和粗细度均极显著影响扦插的成活率,萌芽度和粗细度的交互作用对扦插的成活率也有极显著影响;未萌芽插条扦插成活率明极显高于已萌芽插条的扦插成活率;3种粗细度的枝条中以粗细度为0.7~1.2 cm的插条扦插成活率最高;在枝条萌芽度及粗细度交互作用下,粗细度为0.7~1.2 cm的未萌芽插条扦插成活率最高,粗细度小于0.7 cm的已萌芽插条扦插成活率最低。     

Prevention and Controlling Effect of Intercropping on Pests and Diseases and Its Risk Control in Cotton Fields

Cotton is one of the major field crops which are seriously threatened by pests and diseases. In recent years, the ecological management of cotton pests and diseases with intercropping has become to be an interesting approach. Intercropping possibly increases the population of natural enemies and finally reduces the population density of pests as a result of changes in ecological structure and environmental conditions of farmland. Intercropping thus has been considered an important alternative in controlling pests and diseases. However, cotton field intercropping also has some limitations in controlling pests and diseases. Unreasonable intercropping system has many risks such as increasing labor input, increasing the difficulty of pests’ control, and aggravating pests and diseases. In this paper, the effects and the underlying mechanisms of cotton intercropping on cotton pests and diseases were reviewed. The possible risks and countermeasures used for ecological control of intercropping were also put forward, and the future and application of ecological management of cotton pests and diseases with intercropping were prospected.     

液态有机肥对滴灌棉花光合特性及产量形成规律的影响

为优化滴灌棉花的施肥技术,探究液态有机肥对滴灌棉花生长发育的影响,笔者采取单因子随机区组试验设计,研究在滴灌棉花不同生育时期施用液态有机肥对棉花光和特性、干物质积累及产量的影响。结果表明:(1)施用液态有机肥能够促进植株生长发育,增大光合速率增加棉花产量,且随着液态有机肥施用量的增大,各处理叶面积指数、SPAD值均呈现先增后减的趋势,均于铃期达最大值,其中苗期与蕾期施液态肥的C处理最大值分别为3.25和62.63;(2)叶片净光合速率(Pn)、蒸腾速率(Tr)、气孔导度(Gs)均以C处理最高,并于8月5日花铃期达到极值,而胞间二氧化碳浓度(Ci)表现为C处理最低,为188.67μmol/mol;(3)整个生育期内单株干物质积累量、伏前桃、伏桃、单株铃数及品质均以C处理最好,与其他处理达显著差异水平(P0.05),且增产幅度为27.01%~42.97%。研究表明,液态有机肥适宜的施用时期不仅可提高叶面积指数、叶绿素含量及光合速率,同时为后期干物质积累及产量的形成奠定基础。     

江汉平原棉花合理施氮量研究

采用田间小区试验研究了江汉平原棉花合理施氮量。结果表明,在施用90 kg/hm~2 P2O5、180 kg/hm~2K2O和3 kg/hm~2持力硼基础上,利用线性+平台模型得到棉花中高产量水平下的合理施氮量为280 kg/hm~2。在不明显减产的条件下,从提高氮肥当季利用率、尽量降低氮肥投入的角度,可以将氮肥用量降低到240kg/hm~2左右,在此施氮水平下仍然可能通过改进田间管理措施获得高产。因此,江汉平原棉花氮肥减量空间为20~60 kg/hm~2。     

不同施磷方式对海岛棉农艺性状及产量的影响

在新疆生态条件下,采用海岛棉新海35号研究同等用量3种施磷方式(犁地前全部撒施、犁地前撒施50%与作种肥施50%和全部作种肥施)对棉花农艺性状及产量的影响。结果表明:施磷方式对棉花生育进程的影响较小,各处理对新海35号棉花的农艺性状没有显著性的影响,P1处理可略为提高棉花花铃期叶面积指数,其中P1处理会略提高棉花后期的干物质积累量,以P1、P2处理的方式施磷肥,棉花的单株结铃数可提高4%~7%皮棉产量可提高12%~14.8%。     

冠县棉花花铃期田间管理技术

阐述了冠县棉花花铃期的生育特点,结合生产实际制定了田间管理关键技术措施,包括重施花铃肥、补施盖顶肥、中耕培土、适时整枝、化学调控、病虫害防治等,以供参考。     

Development and Application of Cotton InDel Markers Based on High Throughput Sequencing

[Objective] Dimorphic InDel markers can be used for cotton variety identification and purity detection, to improve the accuracy and efficiency of cotton seed testing, and to play a role in molecular breeding of cotton. [Method] Based on the whole genome sequencing of 121 cotton varieties from different sources, the InDel markers with high polymorphism were developed according to polymorphism information content(PIC) and were applied in the genetic distance analysis and cluster analysis by using 66 cotton varieties in China. [Result] Totally 10 967 InDel were identified based on the next generation sequencing data of 121 cotton varieties. Among the 85 pairs of InDel primers synthesized, 64 were selected including 35 from At group and 29 from Dt group. The minimum average allelic frequency(MAF) of At and Dt chromosomes were 0.45 and 0.32, respectively, while the PIC were 0.49 and 0.40, respectively. The genetic distances of the 66 cotton varieties ranged from 0.04 to 0.65 centimorgan (cM), with an average of 0.39 cM. The two varieties with the largest genetic distance were Simian 3 and CCRI 36, and the two varieties with the smallest genetic distance were Xumian 18 and Xuza 3. [Conclusion] The 64 cotton dimorphic InDel markers can effectively reveal the relationships among varieties based on the genetic distance, and distinguish cotton varieties from different sources, which has certain theoretical significance and application value.     

丘陵山地用小型自走式青贮机的设计思考

玉米是世界三大主要粮食作物之一，收获是玉米生产的重要环节。设计一款适合偏远山区、丘陵地区等路况复杂、地块小且不规则地使用的青贮机有很好的应用价值。本文通过对设计内容的研究与分析，得出设计流程，为物理样机提供理论依据。     

基于合成法的定位误差的分析与计算

为保证机床夹具设计的可靠性,定位误差的计算是机床夹具设计过程中必不可少的重要环节之一。为此从定位误差的产生机理出发,介绍了定位误差的概念、产生原因,并给出计算公式,有助于快速实现定位误差的求解。