湖南省生姜资源主要农艺性状鉴定评价

研究旨在对湖南省47份生姜种质资源的15个数量性状和10个质量性状进行分析,以期探索湖南省各地生姜资源间的亲缘关系及变异特性,为湖南省生姜种质评价与新品种创制提供理论依据。用Excel及SPSS等对调查收集的农艺性状进行分析,结果表明,湖南省生姜资源具有丰富的遗传多样性,变异系数范围为13.22%~40.13%;聚类分析中,47份生姜资源分为2类4个亚组,其中第I类群的41份资源为密苗型资源,第II类群的6份资源为疏苗型资源,亚组I和亚组IV近似纺锤状;亚组II和亚组III近似灯泡状;主成分分析中,提取出的3个主成分累计贡献率达83.078%,分别命名为高产型形态因子、低产型形态因子和产量的叶部因子;相关性分析中,根状茎、株形、地上茎、子姜、叶部等形态因子与根状茎质量呈极显著正相关,分枝数和主茎叶数与根状茎质量呈极显著负相关,表明植株高大,分枝少,地上茎粗壮,根状茎、子姜粗长的品种单株根状茎质量相对更高;通径分析中,主茎叶数、分枝数对根状茎质量的直接通径系数为负,而根状茎、地上茎粗、子姜长、株高等对根状茎质量的直接通径系数为正,表明在一定范围内,生姜植株高大、地上茎秆粗壮、分枝少、叶片较少,根状茎粗长、子姜长的生姜品种具有高产潜力。该试验解析了湖南省生姜资源各主要农艺性状对根状茎质量形成的贡献大小,为更好地指导湖南省生姜生产提供了理论依据。     

不同坡位条件对毛乌素沙地长柄扁桃林地土壤水分的影响

[目的]揭示半干旱区固定沙丘不同坡位条件下土壤水分空间变化规律,为固定沙丘土壤水分合理利用提供决策依据。[方法]在毛乌素沙漠东南缘陕西省神木市生态协会毛乌素治沙造林基地,以固定沙丘12 a龄人工长柄扁桃林地为研究对象,建立土壤水分定位观测小区,使用CNC503DR型中子仪对2018年7—10月0—300 cm土层土壤水分进行测定,并分析不同坡位条件下长柄扁桃林地生长季土壤水分时空变化特征。[结果](1)坡顶与坡上0—300 cm土壤剖面含水量随土层深度的增加呈先增加后减小,之后趋于稳定的变化趋势,而坡中(上、下)与坡底表现为类似S形的变化规律,土壤含水量表现为:坡底坡中(上)坡上≥坡顶坡中(下);(2)坡底土壤含水量表现出强变异性,其他4种坡位条件下为中等变异;(3)不同坡位条件下蒸散发表现为:坡底坡顶坡中(下)坡上坡中(上),坡上属强变异,而坡底则表现出中等变异且变异系数最小。[结论]不同坡位条件对固定沙丘土壤水分及蒸散耗水具有重要影响,坡底土壤含水量及蒸散发量均最大,且具有较强的不稳定性。     

杉木老龄林群落的种-多度关系研究

以杉木老龄林群落为研究对象,结合对数级数和对数正态分布模型,建立3 600 m2的大样地分析杉木老龄林群落的种-多度关系。结果表明:样方的平均物种数和个体数分别为6.86种和35.75株,各样方的物种数及个体数存在极显著正相关关系,说明杉木老龄林群落中生境空间对物种个体的承载能力,还未限制其物种数量。个体数-种序(p>0.05)和频度-种序(p>0.05)的分布曲线均符合对数级数分布;对数正态分布模型则能够较好拟合个体数-种序(p>0.05)的分布曲线,但频度-种序(p<0.05)的分布曲线则不适合用该模型来解释。随着尺度的增加,物种数和个体数的变异系数、二者间的相关性及物种数的方差逐步下降,个体数的方差却呈上升的趋势。     

1958—2018年广西早稻高温热害时空变化规律

为了掌握广西水稻高温热害的变化规律特征,为水稻生产制定防灾减灾对策提供决策依据,本研究利用广西89个气象观测站1958—2018年观测资料及地理信息数据,采用GIS技术、M-K突变分析和Morlet小波周期分析等方法,探究广西早稻高温热害发生的时间变化规律和空间分布等特征。结果表明：（1）1958—2018年广西早稻高温热害呈增长趋势,20世纪90年代为发生低谷期,21世纪10年代为高发期;（2）高温热害发生次数在2009年发生增多突变,除重度高温热害外,轻、中度高温热害次数变化均有突变发生;（3）高温热害发生频次存在18、32年左右的显著周期变化,预计2018年之后广西早稻高温热害仍处于高发期;（4）高温热害高发区位于左、右江河谷,桂中盆地和西江—浔江—郁江等流域区域,沿海地区发生频次少于内陆。以上研究结论对实现水稻丰产稳产优产具有重要的现实意义。     

超甜玉米子粒果皮柔嫩度的变化规律

为了探讨超甜玉米果皮柔嫩度在子粒发育进程中的变化规律,以10份超甜玉米自交系为材料,采用硬度计法测定子粒发育过程中果皮柔嫩度值,分析果皮柔嫩度在不同环境条件下的变化。结果表明,10份参试材料在果皮柔嫩度上存在梯度差异,其中PE10果皮柔嫩性最好,T105中等,S33205最差;在湖北武汉(2014年春)、海南陵水(2014年冬)两种环境下,在授粉后第12~24天,PE10、T105、S33205的果皮柔嫩度值均呈上升趋势,且各测定时间点的柔嫩度均值由大到小的顺序均为S33205、T105、PE10;随着子粒的发育,相同材料在不同环境条件下果皮柔嫩度差异呈现先增大后缩小最后又趋于一致的规律;2014年湖北武汉春季与海南陵水冬季相比,同一材料最适采收期相差4 d,但最适采收期的果皮柔嫩度值差异不显著,说明环境改变会影响果皮嫩度变化速率,但果皮柔嫩度的好坏本质上仍决定于材料本身。     

水平摘锭式采棉机采摘头传动系统优化与试验

为了提高水平摘锭式采棉机的作业效率,针对国产采棉机在高速作业过程中存在采摘速比系数匹配不当、采摘头传动系统不合理的问题,该研究根据水平摘锭式采棉机采摘头结构与工作原理,对采摘头传动系统、采棉机采摘机理进行分析,根据传动系统传动要求和采棉机采摘条件,建立目标函数与约束条件,运用遗传算法和1stOpt软件对采摘头传动系统进行优化分析。优化结果为:滚筒动力齿轮齿数为72,离合器上齿轮变位系数为-0.14,滚筒动力齿轮变位系数为1.208,齿轮顶隙系数为1.25。结合采棉机作业要求搭建棉花采摘性能试验台,选取采摘滚筒转速113～143 r/min、作业速度5.93～7.20km/h,对优化前后采摘头的作业性能进行验证试验。结果表明:优化后的采摘头作业速度由6.4km/h提升至7.2 km/h,工作效率由4.86 hm~2/h提升至5.47 hm~2/h,提高了12.5%;优化后的采摘头在7.2 km/h的作业速度下,采净率由90.4%提升至93.7%,采净率提高了3.6%,含杂率由10.28%降至9.72%,含杂率降低了5.4%,验证了传动系统优化结果的合理性。该研究可为国产采棉机采摘头的研发提供参考。     

Organic input quality is more important than its quantity: C turnover coefficients in different cropping systems

Annual C input to soil is a major factor affecting soil organic carbon (SOC) dynamics. However different types of C-sources can have different behaviour, in relation to their chemical characteristics and how they interact with soil. Root-derived C, in particular, should be more efficient than other organic materials as a result of the physicochemical and biological characteristics of the surrounding environment, leading to a reduction in the C decomposition rate.To test this hypothesis, we considered a long-term experiment underway in Northern Italy since 1962, comparing permanent meadow and 6 different crop rotations over a wide range of nutrient inputs, in both organic and inorganic forms. C inputs from amendments were measured and those from crops were calculated using allometric functions and crop and residues yields. The time evolution of SOC was studied through a single-pool, first-order kinetic model, allowing the estimation of humification coefficients for residues, roots, farmyard manure and cattle slurries.The highest value of the humification coefficient was estimated for farmyard manure, which confirmed its high efficiency in stabilising SOC content. Root C presented a humification coefficient 1.9 times higher than above-ground plant materials while slurries were intermediate, with a humification coefficient roughly half that of farmyard manure and even lower that of roots.The quality of C input thus seems of fundamental importance for evaluating the sustainability of different cropping systems in terms of SOC dynamics.     

某高铁隧道小口径井抽水试验探讨

指出了在某高铁隧道勘察中采用小口径抽水试验方法,具有操作简单便捷,成本低的优势。通过小口径井抽水试验查明场地的水文地质条件,得出了水文地质原始数据资料,根据单孔稳定流承压水非完整井的水文地质实际情况,选取合适的公式分别计算出了隧道岩层渗透系数及影响半径,为高铁隧道的勘察设计及顺利施工提供参考。     

Reducing crude protein variability and maximizing savings when formulating corn-soybean meal-based feeds

Crude protein in corn and soybean meal have been documented to vary, and such inherent variability can result in under- or over-feeding of CP when feeds are formulated, leading to reduced bird growth, added input costs, and increased environmental pollution. The purpose of this study was to compare 2 grain-handling techniques and 2 feed formulation methods (linear vs. stochastic programming) to reduce CP variability in finished feeds and determine resulting costs or savings. The 2 grain-handling techniques were placing all the random batches of each delivered ingredient in to (1) a single bin (1-bin method) or (2) segregating above- and below-average samples into 2 bins (2-bin method). A fast way of estimating the composition of the ingredients is now available (near-infrared reflectance spectroscopy). Microsoft Excel workbooks were constructed to solve broiler starter feed formulation problems. Formulating feeds by linear and stochastic models based on the 2-bin method reduced CP variability by at least 50% compared with the 1-bin method. Formula cost was reduced by ˜20 cents per ton (averages of August 2012 United States ingredient prices) when the 2-bin method was used with the linear model. Formulating feed with a margin of safety increased formula cost by $3.40 per ton. Stochastic feed formulation increased formula cost to meet the specified CP level in feed at any probability of success, and formula cost was reduced substantially with the 2-bin method (up to $6.47 per ton). The magnitude of savings and reduced feed variability suggested that, regardless of the costs associated with building extra bins, the 2-bin method can be economically efficient in the long run. Therefore, it could be possible to split the batches of feed ingredients at a feed mill into above- or below-average bins before feed formulation to reduce CP variability and to maximize savings.