CTM系列汽车拖拉机综合测试仪在汽车滑行阻力系数测定中的应用

介绍了汽车滑行阻力系数的测定方法,理论分析和试验结果均表明:应用CTM系列汽车拖拉机综合测试仪,在测定汽车滑行距离的同时,测定汽车滑行阻力系数的方法简便、可靠。     

贵州省农业产业结构研究

运用产业结构相似系数、产业结构变化系数和描述产业结构稳定性的熵来对贵州省农业产业结构现状进行分析与评价,其研究成果对确定贵州省农业产业结构调整方向和发展贵州省农业农村经济有一定的参考价值。     

Feeding selectivity of the marine ascidian Styela clava

The sessile suspension feeding ascidian, Styela clava , plays an important role in the functioning of estuarine systems. The feeding selectivity of S. clava was examined using standard physiological techniques in terms of particle sizes and diet concentrations. Styela clava increased its retention efficiency (the proportion of available particles retained in ascidian) with increasing particle size at a lower diet concentration [expressed as particulate organic matter (POM)] from 2.11 to 10.06 mg POM L⁻¹, and the highest retention was reached for 5–20 μm particles. With increasing diet concentration to 20.12 mg POM L⁻¹, S. clava retained small particles (<3.5 μm) more efficiently and large ones (>15 μm) less efficiently. The selectivity of ascidian with different sizes was similar at the same concentration. At every diet concentration, larger ascidians retained more 5–20 μm cells than the smaller ones. All these results indicate that S. clava possesses a particle selection mechanism that may affect the zooplankton communities to a certain degree.     

一种改进的基于混沌吸引子的径流降尺度分析

基于混沌理论，研究水文科学的尺度问题，将混沌分析方法应用于径流的降尺度计算。通过分析大时间尺度的年径流量分解到小时间尺度的月径流量的分解系数的混沌特征量，论证了分解系数具有混沌特性。在此基础上，对分解系数的预测方法提出改进意见并给出具体算法。然后根据预测结果进行月径流量的降尺度计算。实例研究表明，改进的算法用于径流量的降尺度分析具有明显的优点。     

微米木纤维模压制品握钉结合部载荷分布系数的确定方法

微米木纤维模压制品是通过细胞纵向劈裂而成的微米木纤维模压成型的新型高强度人造木基材料制品.以人造木基材料为主要材料的各种握钉力的计算均以栽荷沿轴向分布的积分方程为基础,而有关其栽荷分布系数的精确计算尤为重要.为此本文首先建立了握钉结合部裁荷分布的力学模型,然后给出了螺纹牙受力变形协调条件,推导出了轴向载荷分布强度与螺纹牙侧面上比压的关系式,分析了微米木纤维铺装纹理方向对其模压制品弹性模量的影响,从而详细地推导出了微米木纤维模压制品握钉结合部载荷分布系数的计算公式.     

Characterization, reference ranges and the influence of gender on morphological parameters of the endangered Catalonian donkey breed

This study characterizes morphometrically a limitedsizepopulation in danger of extinction; the Catalonian donkey breed (Spain). Sixty-nine adult individuals of both genders, forty-four jennies and 25 stallions, were characterized and analyzed for twenty-six morphological measurements and twelve corporal indices by a univariate procedure. The population showed little sexual dimorphism, since only eight of twenty-six measures and one of twelve indices showed statistically significant differences for gender effect. The analysis of correlations between measures and obtained dendrograms allowed the identification of interactions between and within the different corporal regions (head, trunk and extremities). The important morphological variability degree (coefficients of variation) shown by individuals of the Catalonian donkey breed will be of great interest to further improve the population.     

林用装卸桥设计荷载取值的研究

分析目前贮木场装卸桥出现的技术事故，对传统的设计荷载的依据提出了质疑。经过对工作过程的分析，应用了力学Ｌａｇｒａｎｇｅ原理，建立了货物提升和下降运动的二自由度振动方程，并求解方程的特征植，得出了最大动荷载的计算与下降速度有关。它产生于货物下降时制动的瞬间而不是货物提升离地的初瞬间。     

灰色关联分析在草坪草引选评价上的应用

根据灰色理论和应用数列间的相似程度来判断两个系统或系统中的两个因素之间关联程度的原理，在对引进的３个草坪草种（１４个品种）多种性状观测及分析的基础上，计算求得各性状的关联系数ε１（ｋ）及关联度γｉ，综合评价各引选品种，由定性评价转为定量评价。结果表明，在贺兰山东麓地区，表现较好的草坪草种有：草地早熟禾类的瓦巴斯、菲尔京、纳苏、爱肯尼４个品种：紫羊茅中的巴可紫羊茅、高羊茅中的梯坡，巴法７８５１两个品     

Analysis of Genetic Diversity in Barley Cultivars Reveals Incongruence Between S-SAP,SNP and Pedigree Data

Accurate assessment of genetic similarity is important for plant breeding, germplasm enhancement and conservation of plant genetic resources. A comparative analysis of genome diversity among a group of six-rowed spring barley (Hordeum vulgare L.) cultivars was carried out using sequence-specific amplified polymorphism (S-SAP) and single nucleotide polymorphism (SNP), with the results compared to the kinship coefficients derived from the pedigree data. Mean pair-wise GS values were estimated to be 0.0957 ± 0.144 (Kinship), 0.491 ± 0.189 (SNPs), and 0.602 ± 0.098 (S-SAPs). S-SAP and SNP-based genetic similarity (GS) values were normally distributed but kinship values had a non-normal and skewed distribution. Pair-wise correlation of GS values were lowest for the S-SAP and the SNP matrices (r =; 0.040, p<0.230) and highest for the SNP and pedigree matrices (r =; 0.240, p < 0.001). Analysis of molecular variance (AMOVA) attributed about 90.4% of observed variation to the cultivars within each of the malting and feed groups. Variance component between malting and feed groups was 6.6% for both SNP and S-SAP data suggesting lack of a significant genetic differentiation along this agronomic division. The remaining 3% of variation was attributed to genetic diversity within cultivars. Although both DNA-based marker systems were able to differentiate all barley cultivars, significant difference were observed in the pattern of genetic relationships obtained by the two marker systems and the pedigree data.     

油菜抗倒伏测试风洞关键部件仿真与试验

为解决现有油菜抗倒伏品种选育周期长、难度大等问题，依托计算流体力学软件Fluent建立油菜抗倒伏测试风洞模型，对风洞扩散段、稳定段、收缩段等关键部位进行参数设计及仿真试验，分析该模型对风洞流场品质的影响，最终通过正交试验选择最佳设计方案。结果显示，单因素试验中，收缩段长度Lc增加，风洞出口风速变异系数增加，气流品质下降；随稳定段长度Lw增加，风洞出口风速变异系数先减小后增加，稳定段长度1 000 mm时，风速变异系数最低，气流品质最佳；阻尼网距稳定段出口长度增加，风洞出口风速变异系数先降低后增加，阻尼网距稳定段出口0.65Lw时，风速变异系数最小。正交试验结果显示，收缩段长度600 mm、稳定段800 mm、阻尼网距风洞出口0.65Lw时，对应风洞试验区风速平均变异系数为0.139，风速较其他方案更稳定，气流品质最佳。实测验证发现，与仿真结果相比，实测风速大小无明显差别，且实测结果中各截面风速变异系数略优于仿真值，整体仿真结果与实测效果拟合较好。