乳粉喷流性及影响因素的探讨

通过对乳粉颗粒观察及对其喷流性的研究,测定代表流动性的自然坡度角（θr）、压缩率（Cp）、凝集度（Ch）、代表喷流性的崩溃角（θf）、差角（θd）、分散度（Ds）,讨论各种性能对乳粉的影响因素.     

人工林杨木表面密实化技术研究现状及发展趋势

资源的转变以及供需矛盾的紧张,使得人工林杨木表面强化技术成为重要的研究课题.本文介绍了国内外杨木表面强化技术的研究现状、发展趋势及取得的成果,指出了表面强化技术存在的问题,并从资源的可行性和市场前景等方面,对表面强化技术的应用进行了探讨,为人工林杨木表面密实化的进一步研究提供借鉴.     

全自动纸浆模塑餐具生产线气动系统设计

介绍了全自动纸浆模塑生产线的生产工艺过程，采用信号一动作状态线图法对气动系统进行设计，并描述了纸浆模塑生产线气动系统的工作过程及系统组成。     

人工林软质木材表面密实化新技术

采用一种新型木材改性处理剂，分别以改性异氰酸酯浓度5％、10％、15％、20％，对美国人工林火炬松（Pinus taeda）进行表面密实化处理。结果表明，随着树脂浓度的增加，无论是冷水浸泡还是煮沸，木材的吸水厚度膨胀率和压缩变形恢复率明显降低。表面密实化后，火炬松处理材的MOR和MOE值分别比素材提高43．9％和30．1％；水浸24h和煮沸2h后的湿状抗弯性能比素材略低，干状抗弯性能明显比素材高，MOR分别高28．0％和25．76％；MOE分别高22．55％和27．79％。改性异氰酸酯浸渍处理后的表面密实化木材，具有一定的阻燃效果；表面耐磨耗性能和表面硬度亦明显改善。     

Initial shapes of stress-strain curve of wood specimen subjected to repeated combined compression and vibration stresses and the piezoelectric behavior

This study investigated the relationship between the initial shape of the stress (σ)-strain (ε) curve of a Chamaecyparis obtusa wood specimen subjected to repeated combined compression and vibration stresses at various angles between the fiber direction and load direction and the piezoelectric behavior. The main findings of the study are: (1) the σ-ε curve became convex initially, and then the stress was proportional to the strain. The σ-ε curve had almost the same shape during both loading and unloading. (2) The σ-piezoelectric voltage (P) curve was nonlinear, with a maximal point or cusp on the curve, which had almost the same shape during both loading and unloading, as was also observed for the σ-ε curve. (3) The plot of the first derivative of the stress [dσ/dε (= σ′)] against ε was nonlinear. The σ′-ε and P-ε curves at various angles were fairly similar. (4) The stress at the maximal point (or cusp) of the σ-P curve decreased with an increase in the angle between the fiber direction and load direction. The tendency of the stresses was very similar to that of Young’s modulus and compression strength calculated from Hook’s law and Hankinson’s law, respectively.     

竹材横纹压缩的应力松弛

以毛竹(Phyllostachs pubescens)为对象,对竹材应力松弛规律进行了实验研究,分析了不同温度及不同含水率对竹材横纹压缩的应力松弛特性的影响,建立了描述竹材横纹压缩应力松弛模型。实验表明,竹材横纹压缩应力松弛与含水率、温度、应变水平密切相关,随着温度的升高和含水率的增加,竹材的应力松弛速率增大,应力松弛时间缩短。     

Fundamental studies on wood/cellulose-plastic composites: effects of composition and cellulose dimension on the properties of cellulose/PP composite

Although wood/cellulose-plastic composites (WPC) of low wood/cellulose content have been more accepted worldwide and are promoted as low-maintenance, high-durability building products, composites containing high wood/cellulose content are not yet developed on an industrial scale. In this study, flow properties, mechanical properties, and water absorption properties of the compounds of cellulose microfiber/polypropylene (PP) and maleic anhydride-grafted polypropylene (MAPP) were investigated to understand effects of the high cellulose content and the dimensions of the cellulose microfiber. The molding processes studied included compression, injection, and extrusion. It was found that fluidity is not only dependent on resin content but also on the dimension of the filler; fluidity of the compound declined with increased fiber length with the same resin content. Dispersion of the composite was monitored by charge-coupled device (CCD) microscope. Increasing the plastic content in the cellulose-plastic formulation improved the strength of mold in addition to the bond development between resin and filler, and the tangle of fibers. The processing mode affected the physicomechanical properties of the cellulosic plastic. Compression-molded samples exhibited the lowest modulus of rupture (MOR) and modulus of elasticity (MOE) and the highest water absorption, while samples that were injection-molded exhibited the highest MOR (70 MPa) and MOE (7 GPa) and low water absorption (2%).     

Crystallity Change of Compressed Poplar Wood Treated by PF Resin

INTRODUCTIONWith the implementing of the Natural ForestryProtection policies in China, the plantation forestry willplay a much larger part in meeting the demand for wood.But the plantation wood, especially Poplar and Fir, havecommon properties of soft structure, low density andpoor processing. Generally speaking, these propertiescan be evidently improved by compressing. MasafumiInoue et al. (1991a, 1991b, 1990) had studied thesurface compression of coniferous wood. Their studiesshowed …     

掺钢渣的石灰粉煤灰稳定碎石抗压强度的研究

以马鞍山钢铁集团钢渣公司的钢渣为研究对象，分析研究了在半刚性基层材料石灰粉煤灰稳定碎石中掺入细钢渣，用细钢渣部分取代粉煤灰后，混合料无侧限抗压强度的变化情况。试验结果表明，随着细钢渣掺量的增加，石灰粉煤灰稳定碎石混合料的无侧限抗压强度呈先增大后减小的趋势。这说明当细钢渣掺量适当时（钢渣：粉煤灰=1：2），能明显提高石灰粉煤灰稳定碎石混合料的抗压强度，其抗压强度可提高30％，所以从其增强效果来看是比较显著的。