周晓平(宁化县县属国有林场,福建,宁化365400)

近些年来宁化县非常注重高质量、高品位绿色发展要求,保护好绿水青山才能成就金山银山的经营理念不断向纵深推进,人们对乡土树种越来越倍加珍惜,因此急需加快乡土树种栽培与保护。本文从乡土树种林业内涵展开分析,阐述了乡土树种在宁化县生态恢复过程中的作用,主要从乡土树种具有生长快_^[1]、适应性强、病虫害少、用途多、改良土壤性强、森林植物群落多样性丰富、林分生产力强、再生繁衍能力强等方面深入探索,从而证明了乡土树种在树种优选方面的重要作用。     

东亚小花蝽对草地贪夜蛾幼虫的捕食效应

为探明东亚小花蝽Orius sauteri对草地贪夜蛾Spodoptera frugiperda幼虫的控制潜力,开展了不同温度下东亚小花蝽对不同龄期和密度的草地贪夜蛾幼虫的捕食功能反应与干扰作用研究。结果表明:当东亚小花蝽捕食1龄或2龄草地贪夜蛾幼虫时,其捕食功能反应与HollingⅡ模型拟合度较好。东亚小花蝽对草地贪夜蛾1龄幼虫在20℃、25℃和28℃下的瞬时攻击率分别为0.772 4、1.090 0、0.673 6,处理单头幼虫的时间为0.174 9、0.173 7、0.295 5 d,对2龄幼虫,在20℃、25℃和28℃下的瞬时攻击率分别为0.794 5、1.153 8、0.392 2,处理单头幼虫的时间为0.218 9、0.805 6、0.696 0 d;东亚小花蝽对草地贪夜蛾幼虫的捕食量表现出随着猎物密度增加而上升,随自身密度的增加而下降的趋势;同一温度下,东亚小花蝽对1龄幼虫的日均捕食量和寻找效应均高于2龄幼虫,寻找效应与猎物密度成反比;东亚小花蝽对3龄和4龄草地贪夜蛾幼虫的日均捕食量为0;田间自然状态下东亚小花蝽对草地贪夜蛾幼虫的控制率为34.62%。     

Performance of Bangladesh indigenous rice in a weed infested field and separation of allelopathy from resource competition

This study aimed to identify the potential allelopathic indigenous rice (Oryza sativa L. ssp. indica) varieties from Bangladesh using a performance study in a weed‐infested field and to assess the extent of allelopathic interference relative to resource competition in a glasshouse experiment. Six varieties – namely, “Boterswar,” “Goria,” “Biron” and “Kartiksail” as the most allelopathic, “Hashikolmi” as weakly allelopathic and “Holoi” as nonallelopathic – were raised following a nonweed control method. The infestation levels of weed species were calculated using Simpson's Diversity Index (SDI), which ranged from 0.2 to 0.56. However, a significant correlation coefficient (0.87, P < 0.001) was obtained from these field data compared with the root inhibition percentage from the laboratory bioassay, and the “Boterswar” variety was the most allelopathic. The interactions between the allelopathic variety “Boterswar,” weakly allelopathic variety “Hashikolmi” and Echinochloa oryzicola via a target (rice)‐adjacent (E. oryzicola) cogrowth culture were determined in a hydroponic arrangement. The relative competitive intensity (RCI) and the relative neighbor effect (RNE) values showed that the crop–weed interaction was facilitation for “Boterswar” and competition for “Hashikolmi” and E. oryzicola in rice/E. oryzicola cogrowth cultures. The allelopathic effects of “Boterswar” were much higher than the resource competition in rice/E. oryzicola cogrowth cultures. The converse was observed for “Hashikolmi.” Moreover, the mineral content of E. oryzicola was severely affected by “Boterswar”/E. oryzicola cogrowth cultures’ exudate solution. Therefore, the allelopathic potential of “Boterswar” variety might be useful for developing the weed‐suppressing capacity of rice, which will likely have a significant influence on paddy weed control.     

七星瓢虫对草地贪夜蛾低龄幼虫的捕食能力评价

为了评估七星瓢虫Coccinella septempunctata对重大入侵害虫草地贪夜蛾Spodoptera frugiperda（J.E.Smith）的防控效果,本试验在室内条件下开展了七星瓢虫对草地贪夜蛾1龄、2龄幼虫的捕食功能反应和种内干扰研究。结果表明：七星瓢虫对草地贪夜蛾幼虫的捕食功能反应均符合HollingⅡ模型,七星瓢虫对草地贪夜蛾1龄幼虫的日最大捕食量、瞬时攻击率和处理时间分别为233.100头、1.204和0.103 h;对草地贪夜蛾2龄幼虫的日最大捕食量、瞬时攻击率和处理时间分别为41.220头、1.075和0.582 h。七星瓢虫的搜寻效应随猎物密度的增加而逐渐降低。七星瓢虫对草地贪夜蛾的捕食作用受到较强的种内干扰。试验证明七星瓢虫对草地贪夜蛾具有较好的控害效果,可用于对草地贪夜蛾的防控实践。     

Breeding for increased grain protein and micronutrient content in wheat: Ten years of the GPC-B1 gene

To provide food and nutrition security for a growing world population, continued improvements in the yield and nutritional quality of agricultural crops will be required. Wheat is an important source of calories, protein and micronutrients and is thus a priority to breed for improvements in these traits. The GRAIN PROTEIN CONTENT-B1 (GPC-B1) gene is a positive regulator of nutrient translocation which increases protein, iron and zinc concentration in the wheat grain. In the ten years since it was cloned, the impacts of GPC-B1 allelic variation on quality and yield traits have been extensively analyzed in diverse genetic backgrounds in field studies spanning forty environments and seven countries. In this review, we compile data from twenty-five studies to summarize the impact of GPC-B1 allelic variation on fifty different traits. Taken together, the results demonstrate that the functional copy of the GPC-B1 gene is associated with consistent positive effects on grain protein, Fe and Zn content with only marginally negative impacts on yield. We conclude that the GPC-B1 gene has the potential to increase nutritional and end use quality in a wide range of modern cultivars and environments and discuss the possibilities for its application in wheat breeding.     

Transgenic sorghum with suppressed synthesis of kafirin subclasses: Effects on flour and dough rheological characteristics

Arising from work showing that conventionally bred high protein digestibility sorghum types have improved flour and dough functionality, the flour and dough properties of transgenic biofortified sorghum lines with increased protein digestibility and high lysine content (TG-HD) resulting from suppressed synthesis of several kafirin subclasses, especially the cysteine-rich γ-kafirin, were studied. TG-HD sorghums had higher flour water solubility at 30 °C (p < 0.05) and much higher paste viscosity (41% higher) than their null controls (NC). TG-HD doughs were twice as strong as their NC and dynamic rheological analysis indicated that the TG doughs were somewhat more elastic up to 90 °C. CLSM of doughs and pastes indicated that TG-HD had a less compact endosperm protein matrix surround the starch compared to their NC. The improved flour and dough functional properties of the TG-HD sorghums seem to be caused by reduced endosperm compactness resulting from suppression of synthesis of several kafirin subclasses which modifies protein body and protein matrix structure, and to improved protein-starch interaction through hydrogen bonding specifically caused by reduction in the level of the hydrophobic γ-kafirin. The improved flour functionality of these transgenic biofortified sorghums can increase their commercial utility by complementing their improved nutritional quality.     

拖拉机回转体零件数控加工技术研究基于CAD和UG建模仿真

为了实现拖拉机回转体复杂零部件的数控加工,提高零部件的建模和工艺设计效率,将CAD建模和UG仿真技术引入到了零部件的数控加工工艺的设计上,通过对加工过程的仿真,实现加工工序的优化设计。在利用UG软件进行数控加工仿真时,可以通过碰撞干涉检查和仿真过程的详细查看确定加工工艺的设计是否存在问题,发现是否存在过切等现象,为数控加工时刀具轨迹的修改提供依据,还可以代替零件的试切或试加工过程,对于提高拖拉机复杂零部件的设计和加工效率具有重要的意义。     

土壤铅和镉溶出伏安法检测中影响因素及其削弱方法研究进展

溶出伏安法具有分析速度快、成本低、灵敏度高等优点被广泛应用于检测土壤重金属含量,但在检测土壤重金属时,溶出伏安检测精度会受到多方面因素的影响。该文在介绍溶出伏安法工作原理的基础上,从伏安参数、试验条件和土壤物质成分三方面阐述溶出伏安法检测土壤Pb2+和Cd2+为的影响因素,解析各因素的影响机理,归纳影响削弱方法的研究进展。研究结论为：方波脉冲阳极溶出伏安法最常用于检测土壤Pb2+和Cd2+,伏安参数包括脉冲幅值、电压增量和脉冲频率,试验条件包括沉积时间、沉积电压和支持电解质种类及其pH值,土壤成分主要干扰因素包括非目标重金属和有机质。针对伏安参数和试验条件的影响可以设计优化试验有效削弱。针对非目标重金属和有机质的干扰影响,目前研究还没有提出有效的削弱方法。最后,展望了溶出伏安法检测土壤重金属的未来发展方向。