Response of Wheat Plants to Zinc,Iron, and Manganese Applications and Uptake and Concentration of Zinc,Iron, and Manganese in Wheat Grains

This experiment was conducted at Zahak Agricultural Research Station in the Sistan region in southeast Iran. A factorial design with three replications was used to determine the effects of zinc (Zn), iron (Fe), and manganese (Mn) applications on wheat yield, Zn, Fe, and Mn uptakes and concentrations in grains. Four levels of Zn [soil applications of 0, 40, and 80 kg ha^?1 and foliar application of 0.5% zinc sulfate (ZnSO₄) solution], two levels of iron sulfate (FeSO₄; 0 and 1%) as foliar application, and two levels of Mn (0 and 0.5%) also as foliar application were used in this study. Results showed that the interactive effects of Zn and Mn were significant on the number of grains in each spike. The highest number of grains resulted from the application of 80 kg ZnSO₄ ha^?1 and foliar Mn. The interactive effects of Zn and Fe were significant on weight of 1000 grains. The highest weight of 1000 grains resulted from application of 80 kg Zn and foliar Fe. Application of 80 kg ZnSO₄ ha^?1 alone and 80 kg ZnSO₄ ha^?1 with foliar application of Mn significantly increased grain yield in 2003. The 2‐year results showed that foliar application of Zn increased Zn concentration and Fe concentration in grains 99% and 8%, respectively. Foliar application of Fe resulted in a 21% increase in Fe concentration and a 13% increase in Zn concentration in grains. The foliar application of Mn resulted in a 7% increased in Mn concentration in grains.     

Effects of zinc fertilizer amendments on yield and grain zinc concentration under controlled environment conditions

The application of zinc (Zn) fertilizer to lentil is an agronomic strategy that has the potential to improve yield and enhance grain Zn concentration. A pot study was conducted to determine if Zn fertilizer applied to three popular Saskatchewan lentil cultivars could increase yield and concentration of Zn in the grain. The effects of soil and foliar applied Zn forms, including ZnSO₄, Zn chelated with EDTA, Zn lignosulphonate, and a control were evaluated. Forms of Zn were not found to significantly increase yield (P = 0.828) or grain Zn concentration (P = 0.708) in any of the lentil cultivars tested. Fertilization with soil applied ZnSO₄ resulted in significantly (P < 0.0001) higher amounts of residual available Zn in the soil relative to other Zn treatments. Soil fertilized with ZnSO₄ had 1.13 mg kg^?1 diethylenetriaminepentaacetic acid (DTPA)-extractable Zn compared to 0.84 mg Zn kg^?1 and 0.77 mg Zn kg^?1 in the soil and foliar applied chelated Zn, respectively.     

Zinc fertilization approaches for agronomic biofortification and estimated human bioavailability of zinc in maize grain

Maize (Zea mays L.) is generally low in bioavailable zinc (Zn); however, agronomic biofortification can cure human Zn deficiency. In the present experiment, Zn was applied in pots as ZnSO₄ · 7H₂O to maize cultivar DK-6142 as foliar spray (0.5% w/v Zn sprayed 25 days after sowing and 0.25% w/v at tasseling), surface broadcasting (16 kg Zn ha^?1), subsurface banding (16 kg Zn ha^?1 at the depth of 15 cm), surface broadcasting + foliar and subsurface banding + foliar in comparison to an unfertilized control. As compared to control, all treatments significantly (P ≤ 0.05) increased growth, yield and nutritional attributes in maize. Grain Zn and protein concentrations were correlated and ranged from 22.3 to 41.9 mg kg^?1 and 9 to 12 %, respectively. Zinc fertilization also significantly reduced grain phytate and increased grain Zn concentration. Zinc fertilization, especially broadcasting and subsurface banding combined with foliar spray decreased grain [phytate]:[Zn] ratio to 28 and 21 and increased Zn bioavailability by trivariate model of Zn absorption to 2.04 to 2.40, respectively. Conclusively, broadcasting and subsurface banding combined with foliar spray is suitable for optimal maize yield and agronomic Zn biofortification of maize grain. This would also be helpful to optimize Zn and protein concentration in maize grain.     

Zinc Application Effects on Yield and Seed Oil Content of Sunflower Grown on a Saline Calcareous Soil

ABSTRACT

Two field experiments (2000–2001 and 2001–2002) were conducted at two nearby fields in the Qanavat region of Qom province, central Iran, to investigate the effects of zinc (Zn) fertilization on production of sunflower. The experiment was conducted in a randomized complete block design with six treatments in three replicates. Treatments were: Zn₀ (non-Zn fertilized), Zn₁₀, Zn₂₀, Zn₃₀, and Zn₆₀ (soil application of 10, 20, 30, and 60 kg Zn ha^?1, respectively), and Zn_Spray (foliar spraying of 0.5 kg Zn ha^?1 using ZnSO₄). Seeds of sunflower (Helianthus annuus cv. ‘Record’) were planted on June 20, 2000 and June 15, 2001. At harvest, shoot and seed yields as well as concentration of Zn, iron (Fe), manganese (Mn), sodium (Na), and chloride (Cl) in leaves of sunflower were determined. Addition of 20 kg Zn ha^?1 significantly increased seed production and shoot dry-matter yield of sunflower, while other Zn treatments had no significant effect on shoot dry-matter yield, or decreased it. The thousand-seed weight was the yield component most affected by Zn fertilization, while plant height and head diameter did not change. The maximum content of seed oil was achieved under the Zn₁₀ treatment, then decreased at higher rates of soil-applied Zn such that oil content of seed under the Zn₃₀ and Zn₆₀, treatments was significantly lower than that of the control. Seed oil content was unaffected by foliar spraying of Zn. The concentration of Zn in sunflower leaves was increased with an increase in soil-added Zn of from 0 to 60 kg Zn ha^?1. The highest leaf concentrations of Zn (162 and 175 mg kg^?1 day matter (DM) in the first and second year, respectively) were achieved by foliar application of ZnSO₄. Leaf concentration of Fe was significantly increased in the Zn₂₀ treatment compared with the control but decreased at the higher rates of soil-added ZnSO₄. Soil addition of different levels of ZnSO₄ decreased concentration of Na and Cl in leaves. The lowest concentration of Na and Cl in leaves was observed under Zn₂₀. The results of this study suggest that soil application of a suitable amount of Zn has a positive effect on both quantitative and qualitative yield of sunflower in saline, calcareous soils.     

Zinc Biofortification in Sixty Groundnut Cultivars Through Foliar Application of Zinc Sulphate

A field experiment with 60 groundnut cultivars, in a calcareous soil having 1.20 mg kg^?1 available zinc (Zn), foliar application of 0.2% aqueous solution of zinc sulphate thrice at 40, 55 and 70 days at 500, 500 and 1000 L ha^?1, respectively, increased the number of pods, pod yield, shelling and 100 seed mass and seed zinc (Zn) content, significantly. The seeds Zn content in groundnut cultivars ranged 38–70 mg kg^?1 with an average of 48 mg kg^?1 without Zn and 58 mg kg^?1 with Zn. Foliar Zn application increased 22% Zn in seed. This increase was more than 10% in 48 out of 60 cultivars. The cultivars GG 7, GG 20, Tirupati 4, DH 8, JSP 19, TKG 19 A, CSMG 884 and S 206 showed > 50 mg kg^?1 Zn, > 10% increase in seed Zn with Zn application and > 250 g m^?2 pod yield.     

Type and placement of zinc fertilizer impacts cadmium content of harvested durum wheat grain

Due to potential international marketing concerns, North Dakota durum wheat (Triticum turgidum L. Desf.) producers require strategies that limit cadmium (Cd) in harvested grain. These trials were conducted in order to determine the impact of type and placement of zinc (Zn) fertilizer on harvested grain seed Cd levels and to determine the best timing of foliar Zn-ethylenediaminetetraacetic acid (EDTA). Foliar Zn-EDTA applied at Feekes 10 growth stage had the lowest grain Cd of 0.97 mg kg^?1 when evaluating different fertilizer sources and application timings. Application of 22.4 kg ha^?1 potassium chloride with the seed at planting resulted in the highest grain Cd of 0.151 mg kg^?1 and might be a concern when environmental conditions are conducive for Cd uptake from soil. Stepwise linear regression determined that soil pH and chloride explained 96% of the variability of grain Cd. Applying 1.1 kg Zn ha^?1 as foliar Zn-EDTA in combination with 33 kg nitrogen ha^?1 at Feekes 10.54 growth stage resulted in significantly lower grain Cd, and significantly higher grain Zn, iron, and protein content. Treatments that significantly lowered grain Cd did not decrease grain yield, test weight, or protein content. The treatments that most reduced grain Cd resulted in the most benefits from a production, marketing, and nutritional standpoint and represents an agronomic approach to biofortification of durum wheat.     

CUMULATIVE AND RESIDUAL EFFECTS OF ZINC SULFATE ON GRAIN YIELD,ZINC, IRON,AND COPPER CONCENTRATION IN CORN AND WHEAT

Re-application of zinc (Zn) sulfate for corn (Zea mays L.) production in rotation of wheat-corn has varied effects on yield of crops grown in Zn deficient soils. Therefore, this study was done as split plots in a complete randomized block design (CRBD) where the main plots were control with and without Zn application in wheat (Triticum aestivum L.) production. Sub-plots were of control, without Zn fertilizer, base application of 75 kg per hectare (kg Zn ha^?1), 25% and 50% less than base application and as foliar spray in combination with the 4 soil Zn treatments for corn production. Effect of previous Zn application on grain Zn concentration of corn was significant (P < 0.01). Zinc concentrations in treatments of without previous Zn (nil Zn) application and with Zn application were 28.1 and 31.8 mg kg^?1, respectively. Soil application of 75 kg ha^?1 and foliar application of Zn sulfate gave the highest yield (8853 kg ha^?1) showed an increase of 25 percent in compared with nil-Zn. Although re-application of Zn has small effect on yield, but resulted in was the highest grain concentration.     

Variability in Response to Zinc Application in 10 High-Yielding Wheat Varieties

A pot culture experiment was conducted to study the effect of zinc (Zn) on biofortification of 10 wheat (Triticum aestivum L.) varieties in the Zn-deficient soil of Lucknow. Treatments consisted of 0 and 20 mg Zn kg^?1 as a basal dose and 20 mg Zn kg^?1 basal dose with two foliar sprays of zinc sulfate (ZnSO₄) 0.5%. Foliar sprays of Zn were applied twice at the preflowering stage and 7 days after flowering. Results from the present study revealed that poor growth of plants grown in soil without Zn applications (0 mg Zn kg^?1) were improved by applications of Zn (20 mg Zn kg^?1) more when Zn was applied with two foliar sprays. Application of Zn (20 mg Zn kg^?1) with two foliar sprays also proved beneficial for maximizing Zn concentrations of grains and other plant parts. Wheat varieties NW 1076, K 3827, NW 2036, and UP 262 appeared highly responsive to the treatments.     

Influence of Foliar and Ground Fertilization on Yield,Fruit Quality,and Soil,Leaf, and Fruit Mineral Nutrients in Apple

ABSTRACT

The effectiveness of nitrogen (N)+ zinc (Zn) soil and foliar fertilizer applications on growth, yield, and quality of apple (Malus domestic Borkh ‘Golden Delicious’) fruit was studied in the Zanjan province, Iran. There were eight treatments 1) control (no fertilizer), 2) soil applied N, 3) soil applied Zn, 4) soil applied N+Zn, 5) foliar applied N, 6) foliar applied Zn, 7) foliar applied N+Zn and 8) combined soil and foliar applied N+Zn. The N source was urea [CO(NH₂)₂, 46% N] applied at 276 N tree^{? 1} yr^?1 and the Zn source was zinc sulfate (ZnSO₄,7H₂0, 23% Zn) applied at 110 g Zn tree^{? 1} yr^{? 1}. The soil treatments of N and Zn, were applied every two weeks during June through August (total of 6 times/year) in a 1 m radius around the tree trunk (drip line of trees). The foliar solutions of N (10 g l^{? 1} urea) and Zn [8 g l^{? 1} zinc sulfate (ZnSO₄)] were sprayed at the rate of 10 L tree^{? 1} every two weeks at the same times as described for soil applications. The highest yield (49 kg tree^{? 1}), and the heaviest fruits (202 g) were obtained in the soil and foliar combination of N+Zn treatment. The lowest yield (35 kg tree^{? 1}), and the smallest fruits (175 g) were recorded in the control. Nitrogen, and to a lesser extent Zn, foliar application resulted in decreasing fruit quality (caused russeting, and lower soluble solid), but increasing N leaf and fruit concentrations (2.4% DW and 563 mg kg^{? 1}, respectively). There were significant differences among yield and leaf mineral nutrient concentration in different treatments. But there was no significant difference between fruit mineral nutrient concentration (except N). Ratio of N/calcium (Ca), potassium (K)/Ca, and [magnesium (Mg)+K]/Ca in fruits were found suitable for fruit quality prediction. Combining the zinc sulfate with urea in the foliar applications increased the concentration of Zn from 0.7 to 1.5 mg per kg of apple tissue. Leaf N concentration varied during growth season. Foliar applied nutrient can be more efficient than soil applied, but a combination of soil and foliar applications is recommended for apple tree nutrient management.     

Evaluation of Various Zinc Extractants in Lowland Rice Soil under the Influence of Zinc Sulfate and Chelated Zinc

Field experiments were conducted on rice (cv ‘IET 4094’) in an Aeric endoaquept (pH 7.2) to evaluate the various zinc (Zn) extractants in lowland rice soil under the influence of Zn sulfate and chelated Zn. The diethylenetriaminepentaacetic acid (DTPA), 0.1 N hydrochloric acid (HCl), and 0.05 N HCl‐extractable Zn concentrations in soil increased initially up to the Z29 stage of crop growth when Zn was applied as a single basal source, being greater with Zn ethylenediaminetetraacetic acid (Zn‐EDTA) compared to zinc sulfate (ZnSO₄) application. Among the various extractants, the performance of 0.1 N HCl in extracting Zn was better than the other two extractants and followed the trend 0.1 N HCl > 0.005 M DTPA > 0.05 N HCl. The greatest increase in grain and straw yield of rice was 37.8 and 20.4%, respectively, over the control in the treatment T₇ (1 kg Zn ha^?1 as Zn‐EDTA at basal).     

EFFECT OF ZINC NUTRITION ON GROWTH,YIELD, AND QUALITY OF FORAGE SORGHUM IN RESPECT WITH INCREASING POTASSIUM APPLICATION RATES

A two-year field study was conducted to determine the effect of two zinc (Zn) levels [0 and 10 kg zinc sulfate (ZnSO₄) ha^?1] in respect with four potassium (K) levels (0, 20, 40 and 60 kg K₂O ha^?1) on growth, yield and quality of forage sorghum. The soil of the experimental field was loamy sand (Inceptisol), carrying 70, 08, 77, and 0.51 mg nitrogen (N), phosphorus (P), K, and Zn kg^?1 soil, respectively. Increasing K levels significantly improved most of the growth, yield, and quality attributes gradually irrespective of the Zn levels. Zinc applied at 10 kg ZnSO₄ ha^?1 proved significantly better than no zinc application at various K application rates. The benefit of zinc application increased progressively with increasing K rates for most of the parameters studied, indicating significant response of the crop to positive K × Zn interaction in plants in respect with K and Zn application to the soil. Accordingly, 60 kg K₂O ha^?1 applied with10 kg ZnSO₄ ha^?1 boosted most of the attributes maximally. It resulted in about 20–40% increase in growth attributes, 25% increase in fresh matter yield, 36–38% increase in dry matter yield, and 38% increase in protein yield compared to the comparable K level applied without zinc. It also enhanced N uptake by 38%, P uptake by 5–19%, K uptake by 40–42%, and Zn uptake by 114–144%. Across the K rates, application of 10 kg ZnSO₄ surpassed no zinc application by 30–35% in N uptake, by 8–15% in P uptake, by 33–36% in K uptake, by 120–140% in Zn uptake, by 19–21% in fresh matter yield, by 29–31% in dry matter yield, and by 30–34% in protein yield.     

Response of wheat genotypes to zinc fertilization for improving productivity and quality

Field experiments were conducted to evaluate the effects of zinc (Zn) fertilization on yield potentiality and quality of promising wheat varieties during winter seasons of 2013–14 and 2014–15 at the research farm of the Indian Agricultural Research Institute, New Delhi. Among genotypes, HD 2967 genotype proved as best in realizing the highest grain yield (4.89 Mg ha^?1), net returns and benefit–cost ratio besides increased protein (13.4%) and wet gluten (29.4%) content in grain. Highest grain Zn concentration and recovery efficiency (RE) recorded in HD 2851 and HD 2687, respectively. HD 2932 registered lowest grain hardiness index (GHI) followed by PBW 343, indicating their better bread-making quality. With respect to Zn fertilization, application of 1.25 kg Zn Zn–ethylene diamine tetra acetic acid (Zn–EDTA) + 0.5% foliar spray at maximum tillering and booting stages resulted in the highest yields, grain Zn concentration and RE followed by 2.5 kg Zn (ZnSO₄·7H₂O) + 0.5% foliar spray at both stages. These treatments are also superior most with respect to grain quality parameters such as protein, wet gluten and starch content. From profitability viewpoint, 2.5 kg Zn (ZnSO₄·7H₂O) + 0.5% two foliar sprays were most remunerative with maximum net returns and benefit–cost ratio.     

Symbiotic parameters,growth, nutrient accumulation,productivity and profitability as influenced by integrated nutrient management in lentil (Lens culinaris)

Field experiments evaluated the effects of integrated nutrient management on symbiotic parameters, growth, nutrient accumulation, productivity and profitability of lentil (Lens culinaris Medikus). Application of recommended dose of nutrients (RDN, 12.5 kg N ha^?1 + 40 kg P₂O₅ ha^?1) + 25 kg ZnSO₄ ha^?1 + seed inoculation with biofertilizers [Rhizobium + phosphate solubilizing bacteria (PSB) + plant growth promoting rhizobacteria (PGPR)] + 1.0 g ammonium molybdate kg^?1 seed recorded the highest number & dry weight of nodules, leghaemoglobin content, root & shoot dry weight, plant height, number of pods plant^?1 and 100-seed weight. The next best treatment was RDN + seed inoculation with biofertilizers + 1.0 g ammonium molybdate kg^?1 seed. On the basis of mean of three-year data, the treatment of RDN + 25 kg ZnSO₄ ha^?1 + seed inoculation with biofertilizers + 1.0 g ammonium molybdate kg^?1 seed proved the best in realizing the highest grain yield (34.0%), gross returns (34.0%) and net returns (54.8% higher over control). Nitrogen, phosphorus and potassium in the grains and straw were significantly improved where RDN was applied in combination with seed inoculation, basal application of ZnSO₄ and seed treatment with 1 g ammonium molybdate than their single applications.     

Effects of Organic and Inorganic Fertilizers on Soil and Plant Nutrients and Yields of Pearl Millet and Wheat under Semi-arid Inceptisols in India

A study was conducted to assess fertilizer effect on pearl millet–wheat yield and plant-soil nutrients with the following treatments: T₁, control; T₂, 100% nitrogen (N); T₃, 100% nitrogen and phosphorus (NP); T₄, 100% nitrogen, phosphorus and potassium (NPK); T₅, 100% NPK + zinc sulfate (ZnSO₄) at 25 kg ha^?1; T₆, 100% NPK + farmyard manure (FYM) at 10 t ha^?1; T₇, 100% NPK+ verimcompost (VC) at 2.5 tha^?1; T₈, 100% NPK + sulfur (S) at 25 kg ha^?1; T₉, FYM at 10 t ha^?1; T₁₀, VC at 2.5 t ha^?1; T₁₁, 100% NPK + FYM at 10 t ha^?1 + 25 kg S ha^?1 + ZnSO₄ at 25 kg ha^?1; and T₁₂, 150% NPK treatments. Treatments differed significantly in influencing soil-plant nutrients and grain and straw yields of both crops. Grain yield had significant correlation with soil-plant N, P, K, S, and zinc (Zn) nutrients. The study indicated superiority of T₁₁ for attaining maximum pearl millet grain yield (2885 kg ha^?1) and straw yield (7185 kg ha^?1); amounts of N (48.9 kg ha^?1), P (8.8 kg ha^?1), K (26.3 kg ha^?1), S (20.6 kg ha^?1), and Zn (0.09 kg ha^?1) taken up; and amounts of soil N (187.7 kg ha^?1), P (13.7 kg ha^?1), K (242.5 kg ha^?1), S (10.1 kg ha^?1), and Zn (0.70 kg ha^?1). It was superior for wheat with grain yield (5215 kg ha^?1) and straw yield (7220 kg ha^?1); amounts of N (120.7 kg ha^?1), P (13.8 kg ha^?1), K (30 kg ha^?1), S (14.6 kg ha^?1), and Zn (0.18 kg ha^?1) taken up; and maintaining soil N (185.7 kg ha^?1), P (14.5 kg ha^?1), K (250.5 kg ha^?1), S (10.6 kg ha^?1), and Zn (0.73 kg ha^?1). Based on the study, 100% NPK + FYM at 10 tha^?1 + Zn at 25 kg ha^?1 + S at 25 kg ha^?1 could be recommended for attaining maximum returns of pearl millet–wheat under semi-arid Inceptisols.     

Residual Effect of Copper and Zinc from Fertilizers on Plant Concentration,Phytotoxicity, and Crop Yield Response

Abstract

To avoid toxicity resulting in reduced crop yields and/or phytotoxic symptoms on the foliage, information on the residual effect of micronutrient fertilization after periods of application is desirable. This article includes discussion on the micronutrients copper (Cu) and zinc (Zn), because they are essential and are of concern from plant and animal standpoints. In general, no detrimental effects in yield reduction or phytotoxicity were noted from Cu applications of up to 50 kg Cu ha^?1 to barley (Hordeum vulgare L.) and wheat (Triticum aestivum L.). Barley was an exception where 50 kg Cu ha^?1 decreased yield by about 12% in the first‐year crop. The Cu levels in plants did not exceed 9 mg kg^?1. Studies showed that Zn applications of 50 kg ha^?1 for 2 years in succession and the resulting crop tissue Zn levels as high as 105 mg kg^?1 did not cause any phytotoxicity in cereals. The results of this study suggest that cereals can tolerate high levels of Cu and Zn.     

Effect of Zinc and Dolomite Treatments on the Chemical Composition of Acid Sandy Soil and Bean Crop

The impact of the application of 4,500 kg ha^?1 dolomite with or without 40 kg ha^?1 ZnSO₄ 7H₂O on the elemental composition of bean and soil as well as on agronomic properties of the crop were examined in a pot experiment. The application of dolomite increased soil ammonium lactate–extractable magnesium content threefold and that of calcium by 80%. Application of zinc increased ammonium lactate–extractable zinc content by 100%. The increase of 0.8 pH unit from 5.4 (Ø-Ø) to pH 6.2 (Ø-dolomite) was accompanied by a significantly lower zinc, manganese, and potassium content of the plant material. Magnesium and potassium antagonistic effects manifest in plant composition and soil–plant relationships but not in soil. Magnesium and phosphorus show contradictory relationships: negative in soil and plant but positive in soil–plant relationship. The dry mass of bean shows the order of ZnSO₄-dolomite > ZnSO₄-Ø > Ø-dolomite > Ø-Ø.     

Water Use and Soil Fertility under Rice–Wheat Cropping System in Response to Green Manuring and Zinc Nutrition

ABSTRACT

Soil fertility and water use are two important aspects that influence rice productivity. This study was conducted to evaluate the performance of in-situ (sesbania and rice bean) and ex-situ (subabul) green manuring along with zinc fertilization on water productivity and soil fertility in rice under rice–wheat cropping system at Indian Agricultural Research Institute, New Delhi, India. Sesbania incorporation recorded higher total water productivity (2.20 and 3.24 kg ha^?1 mm^?1), available soil nutrients, organic carbon, alkaline phosphatase activity, microbial biomass carbon and increased soil dehydrogenase activity by 39.6 and 26.8% over subabul and rice bean respectively. Among interaction of green manures and zinc fertilization, subabul × foliar application of chelated zinc-ethylenediaminetetraacetic acid at 20, 40, 60 and 80 days after transplanting recorded highest total water productivity (2.56 and 3.79 kg ha^?1 mm^?1). Foliar application of chelated Zn-EDTA at 20, 40, 60 and 80 days after transplanting recorded significantly higher water productivity than other Zn treatments, however it was statistically similar with foliar application of zinc at active tillering + flowering + grain filling. Sesbania × 5 kg Zn ha^?1 through chelated Zn-EDTA, recorded highest available nitrogen, phosphorus, potassium, zinc, manganese, copper and iron than other green manure and Zn fertilization interactions, although it was statistically similar with rice bean × 5 kg Zn ha^?1 through chelated Zn-EDTA as soil application. Sesbania × foliar application of 5 kg Zn ha^?1 through chelated Zn-EDTA as soil application recorded highest soil enzymatic activities and microbial biomass carbon.     

Agronomic biofortification of chickpea with zinc and iron through application of zinc and urea

ABSTRACT

Zinc (Zn) and iron (Fe) deficiency-related health problems in humans may be solved by improving their concentration in edible grains. The study, conducted in 2015–16 and 2016–17, investigated the effects of soil and foliar application of Zn and foliar application of urea on grain Zn and Fe accumulation of chickpea grains. Soil application of ZnSO₄ @ 25 kg ha^?1 + foliar spray of ZnSO₄ @ 0.5% at flowering and pod formation stages resulted in the highest Zn (45.06 & 44.69 mg Zn kg^?1 grain in the first and second year of study) and Fe (59.74 & 62.88 mg Fe kg^?1 grain) content. Urea application @ 2% at flowering and pod formation stages also resulted in the highest grain Zn (41.12 & 40.26 mg Zn kg^?1 grain) and Fe (58.95 & 61.95 mg Fe kg^?1 grain) content. Grain yield and protein content were significantly increased over control with these treatments. As compared to the sole application of Zn, the combined use of Zn and urea improved the grain Zn and Fe contents. Zinc and urea can be applied to improve Zn and Fe content in chickpea grains and, therefore, can help in ameliorating malnutrition in burgeoning human population.     

Effect of Zinc Humate on Growth of Soybean and Wheat in Zinc‐Deficient Calcareous Soil

Abstract

Humic acids have many benefits for plant growth and development, and these effects may be maximized if these materials are combined with micronutrient applications. In the present study, pot experiments were conducted to evaluate the effects of zinc (Zn) humate and ZnSO₄ on growth of wheat and soybean in a severely Zn‐deficient calcareous soil (DTPA‐Zn: 0.10 mg kg^?1 soil). Plants were grown for 24 (wheat) and 28 days (soybean) with 0 or 5 mg kg^?1 of Zn as either ZnSO₄ or Zn humate. Zinc humate used in the experiments was obtained from Humintech GmbH, Germany, and contained 5% of Zn. When Zn was not supplied, plants rapidly developed visible symptoms of Zn deficiency (e.g., chlorosis and brown patches on young leaves in soybean and necrotic patches on middle‐aged leaves in wheat). Adding Zn humate eliminated Zn‐deficiency symptoms and enhanced dry matter production by 50% in soybean and 120% in wheat. Zinc‐humate and ZnSO₄ were similarly effective in increasing dry matter production in wheat; but Zn humate increased soybean dry matter more than ZnSO₄. When Zn was not supplied, Zn concentrations were 6 mg kg^?1 for wheat and 8 mg kg^?1 for soybean. Application of Zn humate and ZnSO₄ increased shoot Zn concentration of plants to 36 and 34 mg kg^?1 in wheat and to 13 and 18 mg kg^?1 in soybean, respectively. The results indicate that soybean and wheat plants can efficiently utilize Zn chelated to humic acid in calcareous soils, and this utilization is comparable to the utilization of Zn from ZnSO₄. Under Zn‐deficient soil conditions, plant growth and yield can be maximized by the combined positive effects of Zn and humic acids.     

Effect of split application of zinc on yield of rice (Oryza sativa L.) in an inceptisol

Abstract

Rice is mostly transplanted under puddled low land soil conditions in India, where Zinc (Zn) deficiency is a common problem. The objective of this study was to find out the efficacy of split application of Zn on growth and yield of rice in an inceptisol. The split application of Zn as ZnSO₄ · 7H₂O performed better than its single basal application, while the split application of Zn-EDTA did not show any significant difference on yield and yield components of rice over its single basal application. Zn-EDTA was found to be better for growth and yield of rice among the two sources of Zn. The soil application of Zn at 1.0 kg ha^?1 as Zn-EDTA (T₇) recorded highest grain yield of 5.42 t ha^?1, filled grain percentage of 90.2%, 1000-grain weight of 25.41 g and number of panicles m^?2 of 452. The Zn content of grain and straw were found to be maximum in the treatment T₇ i.e. 38.19 and 18.27 mg kg^?1, respectively. Linear regression studies indicated that grain yield of rice is significantly influenced by Zn content of grain, Zn content of straw and DTPA extractable Zn content of soil at the level of 95.96, 96.74 and 95.57%, respectively.