防霉剂对霉菌和食用菌菌丝生长的影响

试验证明，不同防霉剂对不同霉菌有不同的抑制作用，对食用菌菌丝生长的影响也不同，广谱抑菌的富马酸二甲酯(DMF)是一种较好的食用菌防霉剂。     

基于网络的模具CAD／CAE／CAM一体化系统的研究

对基于网络的模具CAD／CAE／CAM一体化系统进行了研究，提出了基于ASP技术的系统体系结构和框架模型。对系统开发过程中的数据交换技术、数据库开发和管理技术、系统核心组件的开发和集成技术进行了探讨。给出了该系统在轿车行李箱后盖拉 模设计和制造中的应用实例。     

两种防霉剂与丙酸的组合对青贮牧草根霉菌毒力的研究

采用抑菌圈法研究了75%百菌清、50%多菌灵与99.5%丙酸在不同浓度下组合对高寒地区青贮饲草根霉菌的毒力。结果表明:丙酸(200mg/kg) 百菌清(400mg/kg)、丙酸(200mg/kg) 多酸灵(300mg/kg)、丙酸(100mg/kg) 多菌灵(300mg/kg)组合对根霉菌的毒力没有显著差异,但其毒力均极显著地高于其他处理;以丙酸(200mg/kg) 百菌清(400mg/kg)组合对青贮牧草根霉菌的抑菌作用最佳,其毒力分别是丙酸(200mg/kg) 多菌灵(300mg/kg)组合的1.05倍和丙酸(100mg/kg) 多菌灵(300mg/kg) 组合的1.20倍。     

模压水泥刨花板生产工艺设计应注意的问题

本文指出了当前模压水泥刨花板生产工艺及设备设计中存在的一些问题，并针对这些问题提出了具体的解决办法。     

防霉中密度纤维板的研制

在湿度较大的地区和潮湿的场所,中密度纤维板(下称中纤板)因长期受潮而产生霉变,使其性能受损,更为严重的是污染了居住环境。因此,研究如何防止中纤板霉变,使其具有防霉性能应作为一项重要的课题。笔者通过对防霉剂选择、优化热压工艺参数、防霉效果测试等方面进行了试验研究,确定了适当的防霉剂及其添加量,得出了压制防霉中纤板的优化热压工艺。     

稀土,碳,氮共渗在模具表面强化中的应用

在气体碳氮共渗渗剂中，添加微量稀土元素对５ＣｒＭｎＭｏ钢的组织和性能有显著的影响。试验结果表明，由于稀土元素具较低的电负性和高的化学活性，三元共渗可强化模具表面，使表层获得大量的合金碳化物，基体组织也由针状马氏体变为以扳条马氏体为的混合马氏体，模具有硬度及热强性都得到提高，延长了模具的使用寿命１－２倍。     

Influence of tillage practices and nutrient management on crack parameters in a Vertisol of central India

The frequency, size and rate of development of cracks influence the transport of water, nutrients and gases in the soil profile and plant growth processes in Vertisols. Despite their importance, studies on characterising cracks in Vertisols of India are limited. This study attempts to evaluate the influence of different tillage practices, nutrient management and cropping systems on cracking behaviour of a Vertisol in central India. The length, depth, width, area and volume of cracks were recorded after the harvest of the wet season crops, i.e. soybean (Glycine max L.) and rice (Oryza sativa L.) from three ongoing tillage experiments with three different cropping systems, i.e. soybean–wheat (Triticum aestivum L.), soybean–linseed (Linum usitatissimum L.) and rice–wheat. The results revealed that all the crack parameters were significantly negatively correlated with the water content of the 0–15 cm soil layer and, crack width and crack volume were significantly positively correlated with the bulk density of the 0–15 cm soil layer. Gravimetric water content and bulk density of the 0–15 cm soil layer together explained 79% variation in the crack volume. The crack volume was significantly negatively correlated (r=0.86,P=0.01) with the root length density of the previous soybean crop. Rice grown under puddled condition significantly enhanced different crack parameters viz., length, depth, width, surface area and volume of the cracks over nonpuddled direct seeded rice. Sub-soiling practised in soybean under the soybean–linseed system significantly reduced the width, depth, length and surface area of cracks by 12.5, 10, 5 and 12%, respectively, over conventional tillage. No tillage practised in soybean under soybean–wheat system resulted in significant increase in width, depth and volume of the cracks but decrease in length and surface area of cracks over conventional tillage and mould board tillage practice. Application of manure reduced the magnitude of different crack parameters in soybean–linseed cropping system. Thus cracking in Vertisols can be favourably managed by the selection of proper tillage practice, cropping system and organic manure amendments.     

高温煅烧纤维素纳米晶体对水性木器涂膜耐霉性能的影响

研究了高温煅烧前后纤维素纳米晶体(CNC)添加量对水性涂膜硬度、附着力、抗冲击强度、色差及对水性涂膜耐霉性能的影响。结果表明:加入CNC与高温煅烧后CNC的水性涂膜硬度均能提高,加入CNC的水性涂膜比加入高温煅烧后CNC的水性涂膜硬度高;CNC与高温煅烧后CNC对水性涂膜的附着力和抗冲击力影响不大;CNC对水性涂膜的色差影响最大值为8.4,高温煅烧后CNC对水性涂膜的色差影响最大值为5.7,比高温煅烧前的涂膜色差最大值小2.7,颜色更加均匀;水性木器涂膜中加入高浓度CNC比加入低浓度CNC有更好的耐霉效果,加入高温煅烧后的CNC对木霉有更好的抑制作用。     

奶牛养殖中霉菌毒素的危害及其防控方法研究进展

近年来,霉菌毒素污染饲料已经引起饲料行业的高度重视。奶牛采食被霉菌毒素污染的饲料后很容易引发各种疾病,有些霉菌毒素还会代谢进入牛奶中对人们的健康造成威胁。本文主要就霉菌毒素对奶牛的危害及其防控方法的研究进行综述,以期为生产实践中降低霉菌毒素的危害提供理论参考。     

食糖中霉菌及酵母菌的检测

试验结果表明：最适合检测食糖含霉菌和酵母菌的培养基为孟加拉红培养基，其次为马铃薯葡萄糖琼脂培养基，最不适合的为高盐察氏培养基。最易检出的稀释度为10^-3，最适检出的稀释度范围为：10^-2-10^-4。