不同砧木对葡萄新梢省力化特性的影响

通过对不同砧穗组合的新梢生长量、新梢生长速率、节间长度、基部粗度及副梢萌发率的测定，研究不同砧木对‘夏黑’和‘87-1’葡萄新梢省力化特性的影响。并调查各个砧穗组合的结果系数，研究省力化特性参数与结果系数的关系。然后运用Topsis评价法对各个砧穗组合进行综合评价。结果表明，对于‘夏黑’葡萄来说，夏黑/华葡1号组合省力化特性最好，结果系数最大，夏黑/抗砧1号组合次之，夏黑/140Ru组合省力化特性最差，结果系数最小。对于‘87-1’葡萄而言，87-1/华葡1号省力化特性最好，结果系数最大，87-1/5C组合省力化特性最差，87-1/ 140Ru结果系数最小。综上，华葡1号与抗砧1号可以有效降低‘夏黑’和‘87-1’葡萄的新梢生长量及副梢萌发率，提高结果系数，控制营养生长，促进生殖生长。     

葡萄籽原花青素的提取工艺优化及其抗氧化活性研究

以新疆地产赤霞珠葡萄籽为原料，采用响应面法对微波辅助提取葡萄籽原花青素的工艺进行优化，并对其体外抗氧化活性进行评价。结果表明，最优提取工艺条件为：液料比25∶1（mL/g），乙醇浓度60%，微波功率427 W，微波时间3 min，在该条件下葡萄籽原花青素得率为8.66%±0.25%；抗氧化试验结果表明：葡萄籽原花青素具有较强的清除1,1-二苯基-2-三硝基苯肼（DPPH）、羟基及2,2-联氮-双(3-乙基-苯并噻唑-6-磺酸)二铵盐（ABTS）自由基的能力，其在三种体系中的IC50值分别为3.71、4.05和3.78 μg/mL，是一种极具开发潜力的天然抗氧化剂。     

11个葡萄品种在乐山地区的花芽分化规律

研究了11个葡萄品种3年生树在四川乐山地区避雨栽培条件下的花芽分化表现。结果表明,结果母枝的花芽分化率,魏可、维多利亚、黑芭拉多、金手指、金优2号和巨玫瑰6个品种的都高于50%,较易形成花芽;户太8号、巨峰、夏黑的在43%~48%;美人指和红指较难形成花芽。结果母枝不同节位的花芽分化率,多数品种在第3节位≥50%;结果枝上花穗着生节位在第3.8~4.9节,其中双花率以巨玫瑰、巨峰和户太8号较高,分别为83.45%、73.61%和73.06%。以结果母枝的花芽分化率≥50%节位作为冬剪的最低节位,则金优2号、户太8号、巨玫瑰、金手指、维多利亚5个品种在第3~4节,黑芭拉多和巨峰2个品种在第2~3节,魏可在1~2节。夏黑表现花芽分化率较低,为43.33%,可能与夏黑不耐弱光有关,设施栽培时应加强透光性。     

无核葡萄胚发育及早期离体培养的研究:Ⅲ.培养方式对离体胚发育的影响

对5个无核葡萄品种的试验表明,不同培养方式对离体胚发育的影响是很明显的,其中4个品种胚发育率液体培养高于固体培养,‘京早晶’在液体培养中胚发育率高达73.7%,是目前国内外胚发育率最高的报道;液体培养比固体培养胚的发育程度高,发育整齐,无畸形胚,易成苗.     

花粉管通道法转基因抗虫棉外源基因的整合方式

对花粉管通道法培育的转Bt基因抗虫棉GK19、GK22、1016、1018、1022、1025、GK5、GKsu12和SGK1进行Southern杂交分析。结果表明,目的基因能够完整整合到基因组里,HindⅢ酶切位点有可能发生甲基化或丢失。除1018以外的上述8个抗虫棉的分析结果还表明,载体骨架没有整合到棉花基因组中。     

果树自交不亲和性的遗传与生理机制及其研究

在简要介绍植物（包括果树）自交不亲和性与生理控制机制的基础上，着重对梨、苹果、杏等果树自交不亲和性的研究进行了综述，内容包括花柱内花粉管生长特点、花柱S糖蛋白的特性与作用机理以及果树自交不亲和的分子生物学研究，并提出了该领域有待研究的问题。     

Capnographic documentation of nasoesophageal and nasogastric feeding tube placement in dogs

Objective: To evaluate the ability of capnography to document proper placement of nasoesophageal (NE) and nasogastric (NG) feeding tubes. This study was conducted in 3 phases. Phase I of this study was designed in order to test the efficacy of capnography to distinguish placement of a feeding tube in the alimentary tract versus the respiratory tract. Phase II was designed in order to document that carbon dioxide (CO₂) could be measured through a polyvinyl chloride (PVC) feeding tube. Phase III was performed in order to evaluate the technique of continuous monitoring during insertion of the feeding tube into the esophagus and stomach as would be performed during a clinical‐tube placement. Design: Prospective study. Setting: Research laboratory. Animals: 24 adult dogs. Interventions: In Phase I, sedated dogs were instrumented with an intratracheal catheter and an 8 French feeding tube placed nasally into the distal esophagus and later advanced into the stomach. In Phase II, dogs were anesthetized and an 8 French feeding tube was placed down the endotracheal tube, then into the esophagus and later advanced into the stomach. In Phase III, sedated dogs were instrumented with an 8 French feeding tube inserted intranasally and then advanced to the level of the nasopharynx, distal esophagus and, lastly, the stomach. Fluoroscopy was used in order to determine location of the feeding tube. Measurements and main results: Phase I measurements included respiratory rate and CO₂ from the trachea, esophagus, and stomach and pH of gastric fluid sample. Phase II measurements included respiratory rate and CO₂ from the endotracheal tube, feeding tube in the endotracheal tube, feeding tube in the distal esophagus, and feeding tube in the stomach. Phase III data collection included respiratory rate and CO₂ as the tube was passed through the nasal cavity, nasopharynx, esophagus and stomach. Phase I fluid samples were collected from 5 of the 9 dogs and had pH values from 1.68 to 4.20. In both phases, values for the respiratory rate and CO₂ from the esophagus and stomach were 0 ± 0, significantly lower (P < 0.001) than the values from the trachea. In Phase II, there was no significant difference between the respiratory rates (P = 0.886) and CO₂ (P = 0.705) readings obtained from the endotracheal tube compared to readings from the feeding tube in the endotracheal tube. In Phase III, there was a significant difference (P < 0.001) between the respiratory rates and CO₂ readings obtained from the nasal cavity and the nasopharynx when compared to those readings obtained from the esophagus and stomach. Measurement of CO₂ and respiratory rate resulted in a reading of 0 every time the feeding tube was in the esophagus or stomach. Conclusions: Capnography may be used in order to detect airway placement of NE and NG tubes.     

长寿花叶盘离体培养及植株高效再生研究

以长寿花叶盘做为外植体进行再生体系的建立,通过一定的激素组合诱导,结果表明MS 6-BA2.0mg/L NAA0.5mg/L组合愈伤组织诱导率可达86.6%,再生率达83.3%,外植体叶盘的摆放方式也对再生有显著影响,叶盘叶面向上放置,有利于其再生,反之不利于再生。加入AgNO3(4.0mg/L)溶液,对芽苗的分化有影响,再生苗开瓶练苗一周后容易生根,移苗入土后生长正常。     

基于冠层温度的温室葡萄CWSI模型试验研究

探讨并建立了适合于镇江丘陵地区温室葡萄水分状况监测的作物水分胁迫指数(CWSI)模型.通过田间实验和观测,得到了适合温室葡萄的CWSI经验模型中的经验关系.初步的检验和分析表明,这一模型是合理的,可以用于温室内葡萄基于冠层温度信息的水分状况监测.     

钢管混凝土拱桥的施工监控技术

钢管混凝土是由混凝土填入薄壁钢管而形成的一种组合材料。在桥梁结构上,钢管混凝土主要应用于拱桥。目前,大跨度钢管混凝土拱桥主要采用缆索吊装-斜拉扣定施工新技术,拱桥的线形通过实测每节钢管拱的标高及拱轴线位置,并借助扣索实施动态调整来保证。为此,介绍了钢管混凝土拱桥施工过程的监控技术,从而指导施工,以确保拱桥建成后满足设计要求。