Irrigation of paddy soil with industrial landfill leachate: impacts in rice productivity,plant nutrition,and chemical characteristics of soil

Treated industrial effluents have high levels of nutrients and dissolved organic matter. The irrigation of rice by flooding can increase nutrient uptake and grain yield. Therefore, this study evaluated the nutrient contents in the shoots and grain of the rice crop and also the chemical of the soil after irrigation of the crop with leachate of the treated industrial effluent. A greenhouse experiment was conducted using pots filled with 20 kg of soil in a randomized block design with three replications. The treatments consisted of control (irrigation with distilled water) and four concentrations of the leachate (25, 50, 75, and 100 %) for irrigation. At the end of the experiment, the nutrient contents in tissues of rice plants, sterility of spikelets, and grain mass were evaluated. Results showed that irrigation with the leachate at 25 % content increased the macro- and micronutrients’ concentrations in the shoot biomass and grain, except for potassium and iron. Irrigation with the industrial leachate decreased tillering and grain yield; however, it increased chlorophyll content, sterility of spikelets, and sodium intake at this leachate concentration. The potassium and sodium levels and the electrical conductivity values of soils irrigated with treated industrial leachate were increased. The use of the treated leachate from industrial effluents is an alternative that reuses the nutritional load, but the volume of leachate should be limited and monitored to prevent the sodicity in the soil and problemsdue to eutrophication.     

Improving wood volume predictions in dry tropical forest in the semi-arid Brazil

The volumetric variability of dry tropical forests in Brazil and the scarcity of studies on the subject show the need for the development of techniques that make it possible to obtain adequate and accurate wood volume estimates. In this study, we analyzed a database of thinning trees from a forest management plan in the Contendas de Sincorá National Forest, southwestern Bahia State, Brazil. The data set included a total of 300 trees with a trunk diameter ranging from 5 to 52 cm. Adjustments, validation and statistical selection of four volumetric models were performed. Due to the difference in height values for the same diameter and the low correlation between both variables, we do not suggest models which only use the diameter at breast height (DBH) variable as a predictor because they accommodate the largest estimation errors. In comparing the best single entry model (Hohenald-Krenn) with the Spurr model (best fit model), it is noted that the exclusion of height as a predictor causes the values of 136.44 and 0.93 for Akaike information criterion (AIC) and adjusted determination coefficient (R2 adj), which are poorer than the second best model (Schumacher-Hall). Regarding the minimum sample size, errors in estimation (root mean square error (RMSE) and bias) of the best model decrease as the sample size increases, especially when a larger number of trees with DBH≥15.0 cm are randomly sampled. Stratified sampling by diameter class produces smaller volume prediction errors than random sampling, especially when considering all trees. In summary, the Spurr and Schumacher-Hall models perform better. These models suggest that the total variance explained in the estimates is not less than 95%, producing reliable forecasts of the total volume with shell. Our estimates indicate that the bias around the average is not greater than 7%. Our results support the decision to use regression methods to build models and estimate their parameters, seeking stratification strategies in diameter classes for the sample trees. Volume estimates with valid confidence intervals can be obtained using the Spurr model for the studied dry forest. Stratified sampling of the data set for model adjustment and selection is necessary, since we find significant results with mean error square root values and bias of up to 70% of the total database.     

Target and non-target site mechanisms of fungicide resistance and their implications for the management of crop pathogens

Fungicides are indispensable for high-quality crops, but the rapid emergence and evolution of fungicide resistance have become the most important issues in modern agriculture. Hence, the sustainability and profitability of agricultural production have been challenged due to the limited number of fungicide chemical classes. Resistance to site-specific fungicides has principally been linked to target and non-target site mechanisms. These mechanisms change the structure or expression level, affecting fungicide efficacy and resulting in different and varying resistance levels. This review provides background information about fungicide resistance mechanisms and their implications for developing anti-resistance strategies in plant pathogens. Here, our purpose was to review changes at the target and non-target sites of quinone outside inhibitor (QoI) fungicides, methyl-benzimidazole carbamate (MBC) fungicides, demethylation inhibitor (DMI) fungicides, and succinate dehydrogenase inhibitor (SDHI) fungicides and to evaluate if they may also be associated with a fitness cost on crop pathogen populations. The current knowledge suggests that understanding fungicide resistance mechanisms can facilitate resistance monitoring and assist in developing anti-resistance strategies and new fungicide molecules to help solve this issue. © 2023 Society of Chemical Industry.     

Antinociceptive effect and acute toxicity of the essential oil of Hyptis fruticosa in mice

The essential oil of the Hyptis fruticosa leaves was analyzed by GC/MS and evaluated for antinociceptive property as well as acute toxicity in mice. The essential oil, at doses of 100, 200, and 400 mg/kg (s.c.), produced significant inhibition of acetic acid-induced writhing, but did not manifest a significant effect in hot-plate test. There was no acute toxicity at doses up to 5 g/kg. Bicyclogermacrene, 1,8-cineole, alpha-pinene, and beta-caryophyllene were the major compounds detected in the essential oil.     

Cardiovascular effects of Hyptis fruticosa essential oil in rats

In non-anesthetized normotensive rats, Hyptis fruticosa essential oil (HFEO, 5, 10, 20 and 40 mg/kg; i.v.) induced hypotension associated with tachycardia. In intact and isolated rings of rat superior mesenteric artery (control), HFEO (1-1000 microg/ml, n=6, cumulatively) induced concentration-dependent relaxations of tonus induced by 10 microM phenylephrine (Phe) (pD(2)=2.6+/-0.27; E(max)=64+/-8.3%). In denuded endothelium pre-contracted rings with Phe or K(+)-depolarizing solution (80 mM), the concentration-response curves to HFEO were not shifted (pD(2)=2.3+/-0.25 and 2.3+/-0.28, respectively), but their maximal responses were significantly (P<0.05 vs control) increased (E(max)=122.3+/-18.2% and 92+/-3.6%, respectively). HFEO was also capable of antagonizing the concentration-response curves to CaCl(2) (3 microM-30 mM) in a dose-dependent manner.     

Creep in chipboard

Summary Ten samples from each of ten brands of commercial chipboard, covering a range of UF, MUF and PF resins, were stressed over a 5-year period at 30% of their short term ultimate bending strength, under protected external conditions. No relationship could be established for the term of the experiment between fluctuations in creep deflection and changes in environmental conditions. Exceptionally, for two short periods of time, relationships were established and these were in line with current views on mechano-sorptive behaviour. Differences in relative creep between the ten brands were significantly greater than those occurring between samples of any one brand. Although there were significant differences in relative creep among the six brands of MUF bonded boards, the relative creep of all these boards was significantly lower than those brands made with UF and high-alkaline cured PF resins. While most of the MUF bonded samples survived the duration of the experiment, all UF and PF samples failed before the end of the 5-year period. For the first 6 months of the experiment, the mean relative creep under protected external conditions was equal to, or slightly less than, that obtained in matched samples tested under a constant environment of 20°C 90% rh.     

Forage legumes in grass pastures in tropical Brazil and likely impacts on greenhouse gas emissions: A review

Beef cattle producers seldom use fertilizers for their pastures in tropical regions of Brazil. Slowly, this is changing but because of the need for repeated applications, N fertilizer is rarely applied. The introduction of a forage legume is an appropriate solution for this problem, but until recently adoption has been very low as the legumes generally have not persisted in the sward. We report research on how grazing management can affect the persistence of stoloniferous legumes in pastures of Brachiaria spp. and the problems of establishing and maintaining crown-forming legumes such as Stylosanthes spp. With suitable management, milk or bovine carcass yields can be equal or greater from mixed than from grass-alone pastures fertilized with 120 or 150 kg Nha^-1 year⁻¹. In addition to savings in CO₂ emissions from fossil fuels for the production and distribution of N fertilizers, nitrous oxide emissions from cattle excreta and legume residues are lower than those from N-fertilized brachiaria grass monocultures. Other studies indicate that enteric methane emissions from cattle may be mitigated when forage legumes are included in their diet. The use of forage legumes in mixed pastures for tropical regions is emerging as a feasible strategy to keep meat and milk production at acceptable levels with reduced greenhouse gas emission rates.     

A new standard area diagram set for assessment of severity of soybean rust improves accuracy of estimates and optimizes resource use

Soybean rust (SBR), caused by Phakopsora pachyrhizi, is the most important yield-damaging fungal disease of soybean due to severe reduction in healthy leaf area and acceleration of leaf fall. In experimental research, SBR severity is estimated visually aided/trained by a standard area diagram (SAD) developed and validated during the mid-2000s (Old SAD). In this study, we propose a new SAD set for SBR with six true-colour diagrams following linear increments (c. 15% increments) amended with four additional diagrams at low (<10%) severities, totalling 10 diagrams (0.2%, 1%, 3%, 5%, 10%, 25%, 40%, 55%, 70%, and 84%). For evaluation, 37 raters were split into two groups. Each assessed severity in a 50-image sample (0.25%–84%), first unaided and then using either the Old SAD or the New SAD. Accuracy, precision, and reliability of estimates improved significantly relative to unaided estimates only when aided by the New SAD (accuracy >0.95). Low precision (<0.78) and a trend of underestimation with an increase in severity were the main issues with the Old SAD, which did not differ from unaided estimates. Simulation to evaluate the impact of the errors by different methods on hypothesis tests, showed that the new SAD was more powerful for detecting the smallest difference in mean control (e.g., 70% vs. 65% disease reduction) than the Old SAD; the latter required a 2-fold increase in sample size to achieve the same power. There is a need to improve some SADs, taking advantage of new knowledge and technology to increase accuracy of the estimates, and to optimize both resource use efficiency and management decisions.     

Outbreak of shoot blight and dieback of Eucalyptus spp., caused by Pseudoplagiostoma eucalypti in Brazil

An outbreak of a new and severe disease was observed in Eucalyptus plantations of Bahia state, Brazil. An Ascomycota fungus has been frequently associated with the main symptoms of the disease namely leaf spot, branch cankers, shoot blight, defoliation, and dieback. Based on morphological characteristics, phylogenetic analysis (ITS and TEF-1α genes), and pathogenicity test on Eucalyptus plants, Pseudoplagiostoma eucalypti was identified as the causal agent of the disease. Although P. eucalytpi has been known from in Brazil since 1998, this is the first report of it causing severe disease and die-back on Eucalyptus spp. and we also record new symptoms associated with the pathogen.