Temporal and spatial progress of the diseases caused by the crinivirus tomato chlorosis virus and the begomovirus tomato severe rugose virus in tomatoes in Brazil

Efficient management of whitefly-borne diseases remains a challenge due to the lack of a comprehensive understanding of their epidemiology, particularly of the diseases tomato golden mosaic and tomato yellowing. Here, by monitoring 16 plots in four commercial fields, the temporal and spatial distribution of these two diseases were studied in tomato fields in Brazil. In the experimental plots these diseases were caused by tomato severe rugose virus (ToSRV) and tomato chlorosis virus (ToCV), respectively. The incidence of each virus was similar in the plots within a field but varied greatly among fields. Plants with symptoms for both diseases were randomly distributed in three of four spatial analyses. The curves representing the progress of both diseases were similar and contained small fluctuations, indicating that the spread of both viruses was similar under field conditions. In transmission experiments of ToSRV and ToCV by Bemisia tabaci MEAM1 (former biotype B), these viruses had a similar transmission rate in single or mixed infections. It was then shown that primary and secondary spread of ToCV were not efficiently controlled by insecticide applications. Finally, in a typical monomolecular model of disease progress, simulation of the primary dissemination of ToSRV and ToCV showed that infected plants were predominantly randomly distributed. It is concluded that, although the manner of vector transmission differs between ToSRV (persistent) and ToCV (semipersistent), the main dispersal mechanisms are most probably similar for these two diseases: primary spread is the predominant mechanism, and epidemics of these diseases have been caused by several influxes of viruliferous whiteflies.     

A comparison of popular approaches to optimize landscape resistance surfaces

Landscape Ecology - Landscape resistance surfaces are often used to address questions related to movement, dispersal, or population connectivity. However, modeling landscape resistance is...     

Radiation-Induced Breeding in Camelina Sativa

Journal of Crop Science and Biotechnology - The ionizing radiation methods, including X-rays, gamma rays, and neutrons to create variation is well established and used in major crops. Many...     

Prediction of Genetic Gain in Sweet Corn using Selection Indexes

Journal of Crop Science and Biotechnology - The cultivation of sweet corn is expanding in Brazil, but there are serious constraints about the availability of commercial cultivars. The selection of...     

Soil quality assessments in integrated crop–livestock–forest systems: A review

Integrated crop–livestock–forest is a promising strategy to improve soil quality. It comprises four different integrated farming systems: crop–livestock, crop–forest, forest–livestock and crop–livestock–forest. This work systematically reviewed studies about integrated crop–livestock–forest systems and soil quality. A total of 92 papers were retrieved from the Web of Science—Clarivate Analytics platform, and the following information was analysed: publication year, institution, region of the studied site, type of integrated system, soil type, tillage system, maximum soil depth and the soil quality indicators assessed. Most studies were published in the second half of the 2010s. Brazil is a prominent focus of research about soil quality and integrated crop–livestock–forest systems, with significant contribution from its central and southern regions. The Embrapa was the main publishing institution, present in over one‐third of the studies. Crop–livestock was the most common integrated system, Ferralsols was the most common soil group, and most of the studied soils were clayey. No tillage was the main tillage system. Most studies focused on the topsoil, assessing physical and/or chemical soil quality indicators. More emphasis on biological indicators of soil quality is required, as well as assessments integrating biological, physical and chemical indicators of soil quality. Future works should compare different integrated systems, including assessments deeper in the soil profile, especially in systems with the forest component, and also in sandy and silty soils. Soil quality indicators that have been rarely used should be further tested. Novel indicators should be added to better understand the promotion of soil quality by integrated crop–livestock–forest systems.     

Cylindrospermopsin effects on cell viability and redox milieu of Neotropical fish <Emphasis Type="Italic">Hoplias malabaricus</Emphasis> hepatocytes

Cylindrospermopsin (CYN) is a cyanotoxin that is cytotoxic to a wide variety of cells, particularly to the hepatocytes. In this study, the toxic effects of purified CYN were investigated in primary cultured hepatocytes of Neotropical fish Hoplias malabaricus. After isolation, attachment, and recovery for 72 h, the cells were exposed for 72 h to 0, 0.1, 1.0, 10, and 100 μg l^?1 of CYN. Then, cell viability and a set of oxidative stress biomarker responses were determined. Catalase, superoxide dismutase, glucose-6-phosphate dehydrogenase, and glutathione S-transferase activities were not affected by exposure to CYN. Concentration-dependent decrease of glutathione reductase activity occurred for most CYN-exposed groups, whereas non-protein thiol content increased only for the highest CYN concentration. Lipid peroxidation, protein carbonylation, and DNA damage levels were not altered, but reactive oxygen species levels increased in the cells exposed to the highest concentration of CYN. Cell viability decreased in all the groups exposed to CYN. Thus, CYN may cause a slight change in redox balance, but it is not the main cause of cell death in H. malabaricus hepatocytes.     

Effect of the addition of Chaetoceros calcitrans,Navicula sp. and Phaeodactylum tricornutum (diatoms) on phytoplankton composition and growth of Litopenaeus vannamei (Boone) postlarvae reared in a biofloc system

The aim of this study was to evaluate the effect of the addition of Chaetoceros calcitrans, Navicula sp. and Phaeodactylum tricornutum (diatoms) on phytoplankton composition and the growth of Litopenaeus vannamei postlarvae reared in a biofloc system . Four treatments were used: BFT (biofloc system without feed and no addition of diatoms); BFT‐F (biofloc system with feed and no addition of diatoms); BFT‐D (biofloc system with the addition of diatoms and no feed); and BFT‐FD (biofloc system with the addition of feed and diatoms), all in triplicate. The shrimp (16 ± 0.02 mg) were stocked at 2500 postlarvae m^?3 and fed a commercial feed. Diatoms were added on the 1st, 5th, 10th and 15th day at a density of 5 × 10⁴ cells mL^?1 for each species. No significant differences (P > 0.05) between treatments were observed for gross primary production, net ecosystem production and water column respiration rate. However, significant differences (P < 0.05) were observed for nitrite, orthophosphate, alkalinity, final weight, weight gain, yield, feed conversion ratio (FCR), phytoplankton and cyanobacteria composition. The BFT‐FD treatment had better performance parameters for final weight (270 mg), weight gain (254 mg), yield (0.67 Kg m^?3) and FCR (0.61), indicating the benefits of the diatoms C. calcitrans, Navicula sp. and P. tricornutum for decreasing cyanobacteria and improving growth of L. vannamei postlarvae reared in biofloc systems.     

Triploid Induction in the Yellowtail Tetra,Astyanax altiparanae,Using Temperature Shock: Tools for Conservation and Aquaculture

Triploidization is an interesting tool to produce sterile fish. In the yellowtail tetra, Astyanax altiparanae, this can be applied for aquaculture and surrogate technologies. In this study, we compared the efficacy of cold (2 C) or heat shock (38 C, 40 C, and 42 C) on triploid induction in the yellowtail tetra. The eggs were treated with cold or heat shock, 2 min postfertilization (30 min in cold shock or 2 min in heat shock). Intact embryos served as the control group. Ploidy status was confirmed by karyotyping, flow cytometry, and nuclear diameter of erythrocytes. The hatching rate decreased after cold shock (12.69 ± 15.76%) and heat shock at 42 C (0.35 ± 0.69%) in comparison with the control group (63.19 ± 16.82%). At 38 C and 40 C, hatching rates (61.29 ± 17.73% and 61.75 ± 22.1%, respectively) were not decreased. Only one triploid arose at 38 C (1/80). At 40 C, a high number of triploids arose (72/78). At 42 C, very few embryos developed into the hatching stage. A large number of haploid individuals arose after cold shock (61/75), with only one triploid. Our results indicate that heat shocking of embryos at 40 C is optimum for triploid production in the yellowtail tetra.     

Phenotypic indicators for cultured pearl size improvement in the black‐lipped pearl oyster (Pinctada margaritifera): towards selection for the recipient growth performance

The black‐lipped pearl oyster, Pinctada margaritifera, is the most important farmed species in French Polynesia and the basis of the most valuable export industry. Mass production of black pearls relies on a surgical operation requiring tissue from a donor pearl oyster to be grafted, together with a nucleus made of shell, into the gonad of a recipient oyster. Improving pearl size through family selection remains one of the main challenges for future aquaculture development. This study analyses the relative contribution of donor and recipient oysters to pearl size. To this end, hatchery‐produced donor oysters of two batches, large and small (based on shell height), were used to supply grafts for recipients, which were then monitored individually for their growth performance by recording shell height, width, and thickness, and total live weight (flesh + shells) every 6 months (four biometric measurement times) over 20 months of culture. Pearls issued from the two batches of donors showed no significant differences in nacre weight or thickness. In contrast, recipient oyster shell height and total weight were increasingly positively correlated with these pearl size parameters over the culture period, becoming significant at 8 months post‐grafting. Potential therefore exists to use shell height and oyster weight as phenotypic indicators for selective breeding of recipient oysters with high growth performance to increase pearl size in P. margaritifera.     

Single nucleotide polymorphisms in the growth hormone gene of Oreochromis niloticus and their association with growth performance

Polymorphisms in the growth hormone (GH) gene that is associated with the growth rate of farmed fish have been the target of many breeding programmes. The present study aimed to identify single nucleotide polymorphisms (SNPs) in GH gene regions to evaluate the association of SNP variations with the growth rate of two Nile tilapia: Oreochromis niloticus (Linnaeus, 1758) strains. The targeted regions were amplified, sequenced, aligned and screened for the presence of SNPs; thereafter, performance tests were used to check for the association between SNPs and weight. Allele and genotype frequencies were estimated for each SNP and genotype. Genotype blocks or sets of SNP genotypes and frequencies were also estimated. Association between SNPs and growth rate was statistically evaluated using a univariate linear mixed model that included both fixed and random effects. A total of 10 SNPs were identified, nine in the proximal promoter and one located in the 5′ UTR, forming 10 genotype blocks. In all weight recordings, five genotype blocks were significantly associated with the highest weights. Single nucleotide polymorphisms 6‐10 were also found to be significantly associated with growth (p‐value < .05). Genotypes with higher additive genetic values for weight were identified in the Chitralada strain, suggesting a possible impact of these additive effects of the GH SNP genotype on the growth rate of Nile tilapia. These findings may be used as part of marker‐assisted selection in tilapia breeding programmes.