Reduced Germination and Seedling Vigor of Weeds with Root Extracts of Maize and Soybean,and the Mechanism Defined as Allelopathic

Journal of Crop Science and Biotechnology - Due to the negative consequences of synthetic herbicides use and their reducing effectiveness due to development of resistant weeds, promotion of...     

Secondary Stress Responses in Juvenile Brazilian Flounder,Paralichthys orbignyanus,throughout and after Exposure to Sublethal Levels of Ammonia and Nitrite

This study investigated the secondary stress responses of Paralichthys orbignyanus exposed to ammonia and nitrite and after recovery. Fish were exposed to 0.12, 0.28, and 0.57 mg NH₃‐N/L, or 5.72, 10.43, and 15.27 mg NO₂‐N/L for 10 d followed by the same time length for recovery. Ammonia‐ and nitrite‐free water was used as a control treatment. Blood samples were collected after 1, 5, and 10 d of exposure and after recovery. Fish exposed to ammonia presented lower and higher glucose levels after 10 d of exposure and recovery, respectively. Ammonia induced initial and transient ionic disturbances and metabolic alkalosis. Nitrite exposure caused hyperglycemia, increased plasma K⁺ levels, and respiratory alkalosis, whereas metabolic acidosis was observed after recovery. Increased proportion of monocytes and/or granulocytes and reduced number of lymphocytes were demonstrated in fish exposed to 0.28 mg NH₃‐N/L (Day 1) and 10.43 mg NO₂‐N/L (Day 5) and after recovery in the 0.28 and 0.57 mg NH₃‐N/L treatments. Exposure to ammonia decreased the proportion of granulocytes on Day 5. In conclusion, exposure to concentrations at 0.12 mg NH₃‐N/L and 5.72 mg NO₂‐N/L provoked physiological disorders in Brazilian flounder. Nonetheless, fish exposed to 5.72 mg NO₂‐N/L following a 10‐d recovery period showed complete resumption of homeostasis.     

Effects of Dietary Supplementation of Barodon on Growth Performance,Innate Immunity and Disease Resistance of Juvenile Olive Flounder,Paralichthys olivaceus,Against Streptococcus iniae

This study was conducted to evaluate the effects of dietary supplementation of Barodon, an anionic alkali mineral complex, on growth, feed utilization, humoral innate immunity and disease resistance of olive flounder. A basal experimental diet was used as a control and supplemented with 0.1, 0.2, 0.3, 0.4, or 0.5% Barodon. Triplicate groups of fish (26.4 ± 0.2 g) were fed one of the diets to apparent satiation twice daily for 10 wk. The growth performance was enhanced (P < 0.05) linearly and quadratically in fish fed diets containing Barodon compared with that in fish fed the control. Feed utilization was significantly improved by Barodon supplementation. Serum lysozyme and antiprotease activities were increased quadratically in Barodon fed groups. Also, significantly higher superoxide dismutase activity was found in Barodon‐fed fish. Dietary supplementation of 0.1–0.3% Barodon resulted in significant enhancement of fish disease resistance against Streptococcus iniae. The findings in this study indicate that dietary supplementation of Barodon can enhance growth, feed utilization, innate immunity, and disease resistance of olive flounder and that the optimum level seems to be 0.1% in diets.     

Hyperhydricity in apple: ultrastructural and physiological aspects

We studied the effects of hyperhydricity on subcellular ultrastructure and physiology of leaves during in vitro regeneration of apple plants. Morphological, anatomical and ultrastructural differences between healthy leaf tissues obtained from greenhouse-grown plants and healthy and hyperhydric leaves obtained from shoots raised from nodal shoot explants in a bioreactor were investigated by electron microscopy and confocal laser scanning microscopy. Compared with healthy leaves, hyperhydric leaves showed abnormal, often discontinuous development of the epidermis and cuticle. Stomata were malformed. The leaf lamina appeared thickened and was characterized by poor differentiation between the palisade and spongy mesophyll tissue. Hyperhydric leaves had a significantly lower chloroplast number per cell and chloroplasts showed reduced thylakoid stacking compared with healthy leaves. Hyperhydricity resulted in a general decrease in concentrations of reduced and oxidized pyridine nucleotides, reflecting a reduction in metabolic activity. The activities of antioxidant enzymes, such as superoxide dismutase, catalase, ascorbate peroxidase and glutathione reductase were higher in hyperhydric leaves than in healthy leaves, indicating that hyperhydricity was associated with oxidative stress. Chlorophyll fluorescence measurements provided evidence of oxidative damage to the photosynthetic machinery in hyperhydric leaves: photochemical efficiency of photosystem II, effective quantum efficiency and photochemical quenching were all lower in hyperhydric leaves compared with healthy leaves.     

Refugee impact on collective management of forest resources: a case study of Bhutanese refugees in Nepal's Eastern Terai region

This article analyzes the relationship between forest resources, refugees, and the host population. The findings of the research suggest that the host population are heavily dependent on the local forest for their daily needs such as fuelwood, timber, grazing area, fodder for domestic animals, foods, and medicine in addition to cultural and esthetic needs. The forest has also been relied upon for agricultural needs such as manufacture of agricultural tools, maintenance of irrigation water systems, erosion control, and fertilizer needs. The forest was under a sustained demand as any other Terai forest of Nepal. After the arrival of refugees in 1992, the demand for forest resources increased substantially. Initially, the construction of the refugee camps decreased the total forest area and also required some felling of trees. More significantly, the refugees themselves became active users of the forest resource, which generated extra pressure on the forest and created scarcity of forest resources. Before the arrival of the refugees, forest management and monitoring of illegal use of the forest resources were carried out by the government through its local forester office. The local residents were active users of the forest resources, but were passive in managing and maintaining the forest resource. However, competition from the refugees instilled a desire in the local population to safeguard and protect the dwindling resource against the external threat by creating the Humse Dumse Community Forest.     

The response of ectomycorrhizal fungi on Pinus densiflora seedling roots to liquid culture

Japanese red pine (Pinus densiflora) seedlings taken from a nursery were grown in liquid culture with all roots entirely submerged in water. The aims of the present study were to observe the reactions of preformed ectomycorrhizae to liquid culture and to examine new infections by ectomycorrhizal fungi on newly formed root tips in liquid culture. Inoculation levels were controlled by trimming the ectomycorrhizal roots to one of three selected root lengths. The results showed that the mantles of pre-formed ectomycorrhizae were lost during the 8 weeks of the liquid culture and that these preformed root tips became blackish and wrinkled, but Hartig nets remained in these blackish root tips. On the newly formed lateral root tips, no ectomycorrhizal mantles were formed, although Hartig nets were found. In addition, the level of inoculum did not affect the frequency of Hartig nets in newly formed root tips, suggesting that the density of inoculum was more important than the amount of inoculum for new infection. In conclusion, ectomycorrhizal fungi endured and infected new roots while submerged; however, only Hartig nets were formed and not mantles.     

Tissue culture responses of explants taken from branch sources with different degrees of juvenility in mature black locust (Robinia pseudoacacia) trees

We studied the in vitro responses of cambial tissue and dormant vegetative buds obtained from top and epicormic branches of three mature black locust (Robinia pseudoacacia L.) trees. Cambial tissues isolated from epicormic branches produced more callus than cambial tissues isolated from top branches, whereas in vitro shoot cultures derived from buds excised from top branches grew faster than those derived from buds excised from epicormic branches. There were no significant differences between the two branch sources in in vitro bud break or shoot multiplication from bud explants or cambial-derived callus tissue, respectively. Furthermore, the top branches, generally considered to be the most mature in a tree, were not recalcitrant in terms of morphogenic capacity compared to epicormic branches.     

Fundamental studies on wood/cellulose-plastic composites: effects of composition and cellulose dimension on the properties of cellulose/PP composite

Although wood/cellulose-plastic composites (WPC) of low wood/cellulose content have been more accepted worldwide and are promoted as low-maintenance, high-durability building products, composites containing high wood/cellulose content are not yet developed on an industrial scale. In this study, flow properties, mechanical properties, and water absorption properties of the compounds of cellulose microfiber/polypropylene (PP) and maleic anhydride-grafted polypropylene (MAPP) were investigated to understand effects of the high cellulose content and the dimensions of the cellulose microfiber. The molding processes studied included compression, injection, and extrusion. It was found that fluidity is not only dependent on resin content but also on the dimension of the filler; fluidity of the compound declined with increased fiber length with the same resin content. Dispersion of the composite was monitored by charge-coupled device (CCD) microscope. Increasing the plastic content in the cellulose-plastic formulation improved the strength of mold in addition to the bond development between resin and filler, and the tangle of fibers. The processing mode affected the physicomechanical properties of the cellulosic plastic. Compression-molded samples exhibited the lowest modulus of rupture (MOR) and modulus of elasticity (MOE) and the highest water absorption, while samples that were injection-molded exhibited the highest MOR (70 MPa) and MOE (7 GPa) and low water absorption (2%).