Chemical analysis of the product in acid-catalyzed solvolysis of cellulose using polyethylene glycol and ethylene carbonate

Degradation and decomposition of cellulose were studied in an acid-catalyzed solvolysis treatment of biomass using polyethylene glycol (PEG) and ethylene carbonate (EC). The solvolysis reaction was followed by a typical reaction system of wood liquefaction that uses sulfuric acid catalyst at 140° or 150°C at atmospheric pressure. The methods of fractionation and chemical analysis of the degraded cellulose in the solvolyzed product are discussed. The solvolyzed product was separated into several fractions, and they were hydrolyzed to release glucose and levulinic acid to determine the quantity of glucosides and levulinates in the solvolysis product. The data clearly showed that the solvolysis reaction had the same mechanism when using PEG or EC. Degradation of cellulose leads to the formation of glucosides, which then decompose, resulting in a levulinic acid structure, and producing a water-insoluble fraction. The conversion rates of both glucosides and levulinates strongly depend on the reaction conditions of the solvolysis. In particular, EC promotes faster conversion of the reactions. The method discussed here is a chemical analytical technique for characterization of the products of wood liquefaction.     

Why invest in minor projects in sub-Saharan Africa? An exploration of the scale economy and diseconomy of irrigation projects

It is well-known that major irrigation projects have a strong scale economy, handicapping irrigation development in sub-Saharan Africa (SSA) because of the difficulty in formulating large-scale projects. Using project-level investment cost and performance data of major and minor irrigation projects, this paper examines the causes of the economy of scale phenomenon. We find that strong scale economy exists not only for major but also for minor projects, i.e., small- and micro-scale, projects. This is largely because of the existence of indivisible overhead costs such as high-opportunity-cost human resources for planning, designing and engineering management and supervision. We also find that large differences between major and minor projects in the absolute level of overhead as well as construction costs creates a strong scale diseconomy and results in better performance of minor projects. The advantage of minor projects holds even when their higher risk associated with the water source is taken into consideration. We argue that there is an urgent need to promote irrigation development in SSA through developing minor projects, and to reduce the heavy burden of overhead costs by developing the capacity of human resources at the national, local and farmer levels in the fields of irrigation engineering, irrigation agronomy, institutional development, and micro water management technologies.     

The T allele at the g.1471620G>T in the EDG1 gene associated with high marbling in Japanese Black cattle is at a low frequency in breeds not selected for marbling

Our previous study detected a single nucleotide polymorphism (SNP), g.1471620G > T , in the 5' flanking region of the endothelial differentiation sphingolipid G-protein-coupled receptor 1 ( EDG1 ) gene, which has been considered as a positional functional candidate for the gene responsible for marbling, and showed association of the g.1471620G > T SNP with marbling in Japanese Black beef cattle. In the present study, we investigated the allele frequency distribution of the g.1471620G > T SNP among the 5 cattle breeds, Japanese Black, Japanese Brown, Japanese Short Horn, Holstein, and Brown Swiss breeds. The T allele at the g.1471620G > T SNP associated with high marbling was found at high frequency in Japanese Black breed that has been subjected to a strong selection for high marbling, while the allele was absent or at very low frequencies in the other breeds that have not been strongly selected for high marbling. Based on this finding, we hypothesized that the pressure of the strong selection for high marbling in Japanese Black breed has increased the frequency of the T allele at the g.1471620G > T SNP in the EDG1 .     

Pits and rocky microsites in a subalpine forest stand facilitate regeneration of spruce saplings by suppressing dwarf bamboo growth inside a deer-proof fence

We determined patterns of microsite suppression in dwarf bamboo Sasa nipponica when grazing deer were absent. This bamboo species is able to outcompete Hondo spruce (Picea jezoensis var. hondoensis) saplings under many environmental circumstances. We set up two 10 × 100 m plots inside a deer-proof fence within a subalpine forest on Mt. Ohdaigahara, central Japan, and two similarly sized plots outside the fence. Within the plots, we surveyed microsites where spruce saplings grew. We measured height and shoot elongation of all spruce saplings, and culm height and cover ratios of dwarf bamboo growing around each spruce sapling. Spruce sapling density and average height were higher inside the deer-proof fence than outside, as were bamboo height and cover. Thus, there was a negative effect of deer browsing on vegetation parameters outside the fence and a suppression of the negative effect of bamboo on spruce sapling growth inside the fence. Spruce sapling height was higher in tree-fall pits than in other microsites inside the fence, whereas both dwarf bamboo height and cover were lower in pits and rocky sites than elsewhere. In soil and collar microsites, spruce sapling shoot growth was lower and bamboo height and cover were higher than in pits and rocky sites. Inside the fence, dwarf bamboo cover was high, but pits and rocks suppressed its growth, allowing spruce saplings to flourish. To restore heavily damaged spruce forests with advanced saplings, it will be necessary to construct deer-proof fences and create and maintain microsites with pits and rocks.     

Genetic diversity of cultivated rice (<Emphasis Type="Italic">Oryza sativa</Emphasis> L.) and wild rice (<Emphasis Type="Italic">Oryza rufipogon</Emphasis> Griff.) in Asia,especially in Myanmar,as revealed by organelle markers

Asian rice (Oryza sativa L.) is widely cultivated in Asia, where it has been classified into Indica and Japonica Group, the latter is further classified into Tropical and Temperate Japonica Subgroup. O. rufipogon is believed to be the closest ancestor to O. sativa, but it remains unclear whether the two groups arose from a single ancestor or different ancestors. Therefore, here, we investigated the matrilineal ancestors of O. sativa using markers for organelle (chloroplast and mitochondrial) genomes, and 119 O. sativa landraces, 10 O. glaberrima Steud., 115 O. rufipogon Griff. from Asia, and 39 accessions from other wild rice species with AA genomes. We screened 18 organelle markers developed based on polymorphic loci in the organelle genomes. In addition, we used the open reading frame 100 of a chloroplast marker. The results indicated that O. rufipogon first differentiated into two lineages and then further differentiated into Indica and Japonica Group, respectively. Accessions of O. rufipogon (R-1f and R-2d types) from Myanmar appear to be the closest ancestors of Tropical Japonica Subgroup and Indica Group, respectively. Therefore, these wild strains may have made a strong contribution to the domestication of rice landraces in Myanmar.     

Solute diffusion into cell walls in solution-impregnated wood under conditioning process III: effect of relative humidity schedule on solute diffusion into shrinking cell walls

This study has focused on solute diffusing into cell walls in solution-impregnated wood under conditioning, process of evaporating solvent. The purpose of this paper was to clarify the RH- (relative humidity-) schedule that promotes the solute diffusion into shrinking cell walls during conditioning. The wood samples impregnated with a 20 mass% aqueous solution of polyethylene glycol (PEG1540) was conditioned with a temperature of 40?°C to the equilibrium point at the RH where the samples swelled maximally. The samples were subsequently conditioned at 40?°C under the schedules including four ways of RH-decrease steps where the cell walls shrunk. The amount of solute (PEGs) diffused into cell walls during the conditioning logarithmically increased with increasing the number of the RH-decrease steps. This was well explained by the theoretical model that describes the solute diffusion into shrinking cell walls. It is clarified from the model that the RH, or moisture content of the sample, should be decreased as gradually as possible to increase the total amount of diffused solute into shrinking cell walls, and that the amount of diffused solute is smaller for the lower moisture content. The model also suggests that effect of change in RH schedule on change in total amount of diffused solute does not depend on solute diffusivity in the sample under drying in a vacuum over phosphorous pentoxide, and that impregnated wood should be conditioned under natural convection rather than forced convection for promoting the diffusion into shrinking cell walls.     

Difference between sprouting traits of <Emphasis Type="Italic">Cercidiphyllum japonicum</Emphasis> and <Emphasis Type="Italic">C. magnificum</Emphasis>

Cercidiphyllum japonicum and C. magnificum are deciduous tree species that produce large numbers of sprouts. They are found mainly in riparian and/or disturbed areas. C. japonicum is distributed in the montane zone in Japan, whereas C. magnificum is distributed mostly in the subalpine zone of central Japan. However, the two species sometimes coexist, e.g., on the talus slope at the valley head of the Chichibu Mountains. We investigated differences in sprouting traits in these two species by comparing class distributions of sprout diameter at breast height (DBH) and heights of individuals on the talus slope. Sprout DBH and individual height were smaller in C. magnificum as compared to C. japonicum. Moreover, the analysis of the DBH-class distribution of each species indicated that C. magnificum had numerous small sprouts and experienced high mortality, whereas C. japonicum had fewer small sprouts and low mortality. It is likely that the sprouting traits of C. magnificum make it more adapted to severe conditions in the subalpine zone than those of C. japonicum.