Effects of elevated CO2 concentration on bulbil germination and early seedling growth in Chinese yam under different air temperatures

The present study investigated the effects of elevated carbon dioxide concentration ([CO₂]) and air temperature on the germination of seed bulbils and the seedling vigour of two Chinese yam lines. Plants were grown under two [CO₂] levels, ambient and elevated (ambient + 200 μmol mol^?1), and two mean air temperature regimes, 22.2 °C (ambient + 1.4 °C) and 25.6 °C (ambient + 5.2 °C). Elevated [CO₂] did not affect bulbil germination under both air temperature regimes. During the early growth stage, the dry weight (DW) of leaves, vines, shoots, roots, belowground parts (roots + tubers) and whole plants were higher under elevated [CO₂] than ambient [CO₂] for both lines under the low- and high-temperature regimes. The values of vigour indexes (index I = germination % × seedling length and index II = germination % × seedling DW) were also higher under elevated [CO₂] than ambient [CO₂] for both lines. These results indicated that Chinese yam seedlings respond positively to elevated [CO₂] during the early growth stage. The above:belowground DW ratios were lower under elevated [CO₂] than ambient [CO₂] in seedlings with very small new tubers for both yam lines, indicating that elevated [CO₂] strongly affected the root growth in the early growth stage. The DWs of post-treatment seed bulbils were higher in the elevated [CO₂] under both air temperature regimes. The results showed that Chinese yam used a smaller amount of the reserves in seed bulbils under elevated [CO₂] than under ambient [CO₂].     

Nutrient starvation affects expression of LC3 family at the feto-maternal interface during murine placentation

LC3 − the mammalian homolog of Atg8 − was found as autophagosome membrane binding protein in mammals and widely used as an autophagosomal marker. LC3A, B and C show different expression patterns in each tissue. The aim of this study was to reveal the differences of expression patterns among LC3 families in mouse placenta under normal condition and nutrient starving condition. LC3A and B were highly expressed in decidual cells. LC3A and B were increased in D14 compared with D12 and D16 in mouse placenta, while LC3C was decreased. Starvation induced increase in LC3B expression specifically. Immunohistochemistry showed different expression patterns among LC3A, B and C. LC3A expression in syncytiotrophoblast was vanished by starvation. The results of real time RT-PCR suggested differences between D12 and D16 in autophagic cascade induced by starvation. Taken together, this study suggests that autophagy could play a role in placental invasion system and that nutrient starvation affects LC3B expression.     

Na?ve-like conversion enhances the difference in innate in vitro differentiation capacity between rabbit ES cells and iPS cells

Quality evaluation of pluripotent stem cells using appropriate animal models needs to be improved for human regenerative medicine. Previously, we demonstrated that although the in vitro neural differentiating capacity of rabbit induced pluripotent stem cells (iPSCs) can be mitigated by improving their baseline level of pluripotency, i.e., by converting them into the so-called “naïve-like” state, the effect after such conversion of rabbit embryonic stem cells (ESCs) remains to be elucidated. Here we found that naïve-like conversion enhanced the differences in innate in vitro differentiation capacity between ESCs and iPSCs. Naïve-like rabbit ESCs exhibited several features indicating pluripotency, including the capacity for teratoma formation. They differentiated into mature oligodendrocytes much more effectively (3.3–7.2 times) than naïve-like iPSCs. This suggests an inherent variation in differentiation potential in vitro among PSC lines. When naïve-like ESCs were injected into preimplantation rabbit embryos, although they contributed efficiently to forming the inner cell mass of blastocysts, no chimeric pups were obtained. Thus, in vitro neural differentiation following naïve-like conversion is a promising option for determining the quality of PSCs without the need to demonstrate chimeric contribution. These results provide an opportunity to evaluate which pluripotent stem cells or treatments are best suited for therapeutic use.     

Effects of utilization of local food by‐products as total mixed ration silage materials on fermentation quality and intake,digestibility, rumen condition and nitrogen availability in sheep

Four wethers were used in a 4 × 4 Latin square design experiment to evaluate in vivo digestibility of total mixed ration (TMR) silage with food by‐products for dairy cows, and the ruminal condition and nitrogen (N) balance were examined. Five by‐products (i.e. potato waste, noodle waste, soybean curd residue, soy sauce cake and green tea waste) were obtained. Four types of TMR silage were used: control (C) containing roughage and commercial concentrate, T1:20% and T1:40% containing the five by‐products replacing 20% and 40% of the commercial concentrate on a dry matter (DM) basis, respectively, and T2:40% containing three by‐products (potato waste, noodle waste and soybean curd residue) replacing 40% of the commercial concentrate on a DM basis. The ingredients were mixed and preserved in oil drum silos for 4 months. The TMR silages showed 4.02–4.44% and 1.75–2.19% for pH and lactic acid contents, respectively. The digestibility of DM and neutral detergent fiber, and total digestible nutrient content were higher (P < 0.05) for T2:40% feeding than for C feeding. Urinary nitrogen excretion tended to be lower (P = 0.07) for T2:40% than for C. The results suggested 40% replacing of commercial concentrate by using the three food by‐products can be most suitable for TMR silage.     

Dielectric relaxation due to heterogeneous structure in moist wood

Dielectric properties in three main directions for hinoki wood (Chamaecyparis obtusa) specimens conditioned at various levels of relative humidity were measured in the frequency range from 20 Hz to 10 MHz over the temperature range from −150°C to 20°C. Three relaxations were observed in the specimens conditioned at high levels of relative humidity. The relaxation in the highest frequency range was ascribed to the motions of adsorbed water molecules. The relaxation in the middle frequency range remained unchanged by the ethanol–benzene extraction of specimens. The relaxation location was independent of measuring directions. The relaxation in the lowest frequency range was not detected in the specimens impregnated with methyl methacrylate (MMA). This result suggested that the relaxation was due to electrode polarization. The Cole-Cole circular arc law applied well to two relaxations recognized in the specimens impregnated with MMA. The relaxation magnitude in the middle frequency range was extremely large, and the distribution of relaxation times was very narrow. These characteristics suggested relaxation of the Maxwell-Wagner type resulting from the interfacial polarization in the heterogeneous structure, which included adsorbed water with large electrical conductivity within the insulating cell walls.     

Mechanical behavior of the crystal lattice of natural cellulose in wood under repeated uniaxial tension stress in the fiber direction

This study investigated the relationship between the cellulose crystal lattice strain (crystalline region) and the macroscopic surface strain in specimens of Chamaecyparis obtusa wood under repeated uniaxial tension stress in the fiber direction. Changes in the strain of the crystal lattice were measured from the peak of (004) reflection using the transit X-ray method. The macroscopic surface strain of each specimen was measured with a strain gauge. In both loading and unloading, the surface strain changed linearly with changes in stress. However, crystal lattice strain was not linear but exhibited changes along a curve with changing stress. Under stressed conditions, the crystal lattice strain was always less than the surface strain, regardless of the frequency of repetition in the loading and unloading cycle. The ratio of the crystal lattice strain to the surface strain showed a negative correlation for stress in both loading and unloading. That is, the ratio decreased with increasing stress, and finally tend to converge to a specific value. The ratio (I/I ₀) between the diffracted intensity (I ₀) in the (004) plane in the unloaded condition and the diffracted intensity (I) in the (004) plane in the loaded condition tend to converge on a specific value with increasing frequency of repetition. When the substantial tension Young’s modulus of the wood in the longitudinal direction decreased, the ratio of the strain of the crystal lattice to the surface strain also decreased. Moreover, the ratio decreased with increasing microfibril angle of the specimen.     

Effects of light and microsite conditions on tree size of 6-year-old Cryptomeria japonica planted in a group selection opening

We examined the extent to which direct and indirect measures of light and microsite conditions could explain variation in tree height and diameter at the base of 6-year-old Cryptomeria japonica trees planted in a group selection opening of about 0.32 ha on a steep slope at Shiiba, Miyazaki Prefecture, southern Japan. We first used the gap light index (GLI) and soil thickness (ST) as directly measured indices. For an indirect measure of light, we used a between-cohort competition index (BCI) estimated from the position and total height of residual trees. For indirect measures of microsite, we examined topographic indices (slope, plan and profile curvature, average slope gradient, and relative elevation) derived from digital elevation models (DEMs) with different resolutions ranging from 2 to 10 m. The multiple linear regression using GLI and ST explained about 45% of variation in tree size, while simple regression using only GLI explained about 35%. The contribution of ST was about half of GLI. The multiple regressions using BCI and the topographic indices did not explain any more variation than using BCI alone (R ² of about 0.26). We conclude that microsite conditions with shallower soil and steeper slope have negative effects on tree growth in group selection openings, although the relative importance is smaller than light conditions. More comprehensive studies considering several openings with more heterogeneous topography including different species are needed to generalize our growth prediction using the indirect measures, which are useful for practical forest management.     

The influences of boiling and drying treatments on the behaviors of tension wood with gelatinous layers in <Emphasis Type="Italic">Zelkova serrata</Emphasis>

This study examined how boiling and drying treatments influenced various physical properties of the tension wood with gelatinous fibers (G-fibers) of a 29-yearold Zelkova branch. By boiling treatment, tension wood with numerous G-fibers contracted considerably in the longitudinal direction and the longitudinal Young’s modulus decreased in spite of the water-saturated condition. The drying treatment caused green tension wood and boiled tension wood with numerous G-fibers to shrink longitudinally and increased their longitudinal Young’s moduli. These specific behaviors in tension wood were highly correlated with the proportion of G-fibers in a specimen and were probably caused by the microscopic behavior of cellulose microfibril (CMF) in the gelatinous layers (G-layers). The longitudinal shrinkage of tension wood due to drying suggests the existence of a hygro-sensible, noncrystalline region in the CMF, which is abundant in the G-layer. Furthermore, the noncrystalline region in the CMF softens during boiling treatment, resulting in the reduction of the longitudinal Young’s modulus in tension wood. The longitudinal contraction of tension wood with G-fibers by boiling might be caused by the tensile growth stress remaining in green G-layers. However, no changes were detected in the 004 d-spacing of cellulose crystal in tension wood from the boiling and drying treatments, regardless of the proportion of G-fibers.