A Comparison of the Effects of Two Prey Enrichment Media on Growth and Survival of Pacific Bluefin Tuna,Thunnus orientalis,Larvae

Three experiments were conducted to investigate the growth, survival, and standardized cohort biomass of Pacific bluefin tuna, Thunnus orientalis, larvae fed nutritionally enhanced prey during the first week of feeding using two commonly used, commercially available enrichment media, AlgaMac Enrich and Marine Glos. T. orientalis larvae exhibited exponential growth in standard length and dry weight. The daily specific growth rates in length and weight are the first reported for T. orientalis larvae and the averages ranged from 3.8 to 4.1% and 27.5%, respectively, for larvae in the AlgaMac treatment and from 4.1 to 6.1% and 31.5%, respectively, in the Marine Glos treatment. Average daily growth rates in length ranged from 0.16 to 0.23 mm/d for larvae in the AlgaMac treatment and from 0.17 to 0.27 mm/d for those in the Marine Glos treatment. Daily growth rates in length were similar to those reported for other tuna larvae reared in the laboratory but slower than most published estimates for larval tunas in situ at similar water temperatures. Mean prey number per gut was positively associated with mean prey level in the tank. Both enrichment media appear to be good sources of nutritional improvement of planktonic prey for T. orientalis larvae.     

Genetic analysis of fat‐to‐protein ratio,milk yield and somatic cell score of Holstein cows in Japan in the first three lactations by using a random regression model

We estimated the genetic parameters of fat‐to‐protein ratio (FPR) and the genetic correlations between FPR and milk yield or somatic cell score in the first three lactations in dairy cows. Data included 3 079 517 test‐day records of 201 138 Holstein cows in Japan from 2006 to 2011. Genetic parameters were estimated with a multiple‐trait random regression model in which the records within and between parities were treated as separate traits. The phenotypic values of FPR increased soon after parturition and peaked at 10 to 20 days in milk, then decreased slowly in mid‐ and late lactation. Heritability estimates for FPR yielded moderate values. Genetic correlations of FPR among parities were low in early lactation. Genetic correlations between FPR and milk yield were positive and low in early lactation, but only in the first lactation. Genetic correlations between FPR and somatic cell score were positive in early lactation and decreased to become negative in mid‐ to late lactation. By using these results for genetic evaluation it should be possible to improve energy balance in dairy cows.     

Vitamin D Status in Different Stages of Disease Severity in Dogs with Chronic Valvular Heart Disease

Background

In humans with heart disease, vitamin D deficiency is associated with disease progression and a poor prognosis. A recent study showed that serum 25‐hydroxyvitamin D [25(OH)D] concentration, the hallmark of vitamin D status, was lower in dogs with heart failure than in normal dogs, and a low concentration was associated with poor outcome in dogs with heart failure.

Objectives

To elucidate the vitamin D status of dogs with chronic valvular heart disease (CVHD) at different stages of disease severity.

Animals

Forty‐three client‐owned dogs with CVHD.

Methods

In this cross‐sectional study, dogs were divided into 3 groups (14 dogs in Stage B1, 17 dogs in Stage B2, and 12 dogs in Stage C/D) according to ACVIM guidelines. Dogs underwent clinical examination including echocardiography. Serum 25(OH)D concentrations were measured in each dog.

Results

Serum 25(OH)D concentration was significantly lower in Stage B2 (median, 33.2 nmol/L; range, 4.9–171.7 nmol/L) and C/D (13.1 nmol/L; 4.9–58.1 nmol/L) than in Stage B1 (52.5 nmol/L; 33.5–178.0 nmol/L) and was not significantly different between Stage B2 and Stage C/D. Among clinical variables, there were significant negative correlations between 25(OH)D concentration and both left atrial‐to‐aortic root ratio and left ventricular end‐diastolic diameter normalized for body weight.

Conclusions and Clinical Importance

These results indicate that vitamin D status is associated with the degree of cardiac remodeling, and the serum 25(OH)D concentration begins to decrease before the onset of heart failure in dogs with CVHD.     

Evidence of LAT1 expression in canine caput epididymis

L-type amino acid transporter 1 (LAT1), the first isotype of amino acid transport system L, transports aromatic and branched amino acids pivotal for fundamental cellular activities such cellular growth and proliferation. LAT1 expression was high only in the brain in contrast to its limited distribution and low level of expression in normal tissues. We found potent LAT1 expression in canine caput epididymis by quantitative RT-PCR and Western blotting analysis. Immnuno-histochemical examination revealed observable LAT1 in microvillous epithelial cells.     

Fatigue of structural plywood under cyclic shear through thickness I: fatigue process and failure criterion based on strain energy

The fatigue behavior of plywood specimens under shear through thickness was examined on the basis of strain energy to obtain common empirical equations for the fatigue process and failure criterion under various loading conditions. Specimens were cut from commercial plywood panels of 9-mm thickness. Loading conditions were set as follows: a square waveform at a loading frequency of 0.5 Hz, a triangular waveform at 0.5 Hz, and a triangular waveform at 5.0 Hz. Peak stress applied was determined to be 0.5, 0.7, and 0.9 of static strength, that is, stress levels of 0.5, 0.7, and 0.9. The stress-strain relationships were measured throughout the fatigue test, and the strain energy was obtained at each loading cycle. Loading conditions apparently affected the relationship between stress level and fatigue life. On the other hand, the relationship between mean strain energy per cycle and fatigue life was found to be independent of loading conditions. Mean strain energy per cycle obtained as the fatigue limit was 5.85 kJ/m³ per cycle. Assuming that the accumulation of strain energy is a fatigue indicator, the fatigue process and failure criterion for the plywood specimens under the three loading conditions were commonly expressed by the relationship between cumulative strain energy and loading cycles.     

Design and pilot production of a “spiral-winder” for the manufacture of cylindrical laminated veneer lumber

A new spiral-winder was developed for continuous manufacturing of cylindrical laminated veneer lumber (LVL), and a suitable resin adhesive for this cylindrical LVL manufacturing system was investigated. This phase was followed by trial manufacturing and evaluation of cylindrical LVL with the optimum resin adhesive identified. The results are summarized as follows. (1) The shortest gelation time was recorded with a mixture of two commercial resorcinol based resins (DF-1000 and D-33) at a weight ratio of 2575. (2) Bath temperature had a remarkable effect on the gelation time of the adhesive mix. (3) High bonding strength was recorded by 2575 DF-1000/D-33 adhesive mix at a high press temperature despite a short pressing duration. Based on the results of items (1) to (3), 2575 DF-1000/ D-33 is recommended for use in the new spiral-winder. (4) The mechanical properties of cylindrical LVL could be improved by using 2575 DF-1000/D-33 with wider veneer width and longer pressing time. (5) The mechanical properties, especially the modulus of rupture, of the cylindrical LVL manufactured require further improvement for practical structural application.     

Stress analysis of wood

Summary For the preparation of specimens for testing the stress distribution with the photoelastic method, various techniques are applicable. In this paper the so-called glass-transition temperature method is tested on a specimen imitating the layered structure of wood. The observations made on this specimen are compared with those obtained from a specimen with isotropic properties.

---

Zusammenfassung Für die Herstellung von Modellen zur Untersuchung der Spannungsverteilung mit spannungsoptischen Verfahren gibt es verschiedene Techniken. In dieser Mitteilung wird das sogenannte Glas-Übergangstemperatur-Verfahren an einem Modell, das den Schichtaufbau des Holzes nachahmt, geprüft. Die Beobachtungen, die an diesem Modell gemacht wurden, werden mit jenen verglichen, die sich an einem Modell mit isotropen Eigenschaften ergaben.

     

Plywood frame corner joints with glued-in hardwood dowels

This paper presents research on plywood frame corners jointed to glulam beams and columns by means of glued-in hardwood dowels. The frame corner was made of a solid block of ordinary plywood of the same width as the glulam beams and with plies parallel to the plane of the frame to avoid splitting due to stress perpendicular to the grain. Hardwood dowels with a diameter of 12mm and a maximum glued-in length of 120mm were glued into drilled holes in the plywood corner and glulam beam ends parallel to the grain direction of the beams to form a momentresisting joint. Static bending tests were conducted of frame corners with 100 X 200mm² and 120 X 420mm² beam cross sections. Bending capacities of the joints corresponding to a modulus of rupture of the jointed glulam beams of about 30MPa were obtained for both closing and opening moments for the small cross sections, and about 22MPa was obtained for the large cross sections. Simple design models for calculation of joint strength and rotational stiffness are also presented.