Exogenous application of allelopathic water extracts helps improving tolerance against terminal heat and drought stresses in bread wheat (Triticum aestivum L. Em. Thell.)

The allelopathic water extracts (AWEs) may help improve the tolerance of crop plants against abiotic stresses owing to the presence of the secondary metabolites (i.e., allelochemicals). We conducted four independent experiments to evaluate the influence of exogenous application of AWEs (applied through seed priming or foliage spray) in improving the terminal heat and drought tolerance in bread wheat. In all the experiments, two wheat cultivars, viz. Mairaj‐2008 (drought and heat tolerant) and Faisalabad‐2008 (drought and heat sensitive), were raised in pots. Both wheat cultivars were raised under ambient conditions in the wire house till leaf boot stage (booting) by maintaining the pots at 75% water‐holding capacity (WHC). Then, managed drought and heat stresses were imposed by maintaining the pots at 35% WHC, or shifting the pots inside the glass canopies (at 75% WHC), at booting, anthesis and the grain filling stages. Drought stress reduced the grain yield of wheat by 39%–49%. Foliar application of AWEs improved the grain yield of wheat by 26%–31%, while seed priming with AWEs improved the grain yield by 18%–26%, respectively, than drought stress. Terminal heat stress reduced the grain yield of wheat by 38%. Seed priming with AWEs improved the grain yield by 21%–27%; while foliar application of AWEs improved the grain yield by 25%–29% than the heat stress treatment. In conclusion, the exogenous application of AWEs improved the stay green, accumulation of proline, soluble phenolics and glycine betaine, which helped to stabilize the biological membranes and improved the tolerance against terminal drought and heat stresses.     

Thermal,swelling and stability kinetics of chitosan based semi-interpenetrating network hydrogels

The present study is focused on studying the swelling kinetics, thermal and aqueous stabilities, and determination of various forms of water in the chitosan (CS) and polyacrylonitrile (PAN) blend and semi-interpenetrating polymer network (sIPN). CS/PAN blend hydrogel films were prepared by solution casting technique. The blend film with optimum swelling properties was selected for the synthesis of sIPN. CS in the blend was crosslinked with the vapors of Glutaraldehyde (GTA) to prepare sIPN. The fabricated CS/PAN blend and sIPN hydrogels films were characterized with Fourier transform infrared (FTIR), thermal gravimetric analysis (TGA) and field emission scanning electron microscope (FESEM). The kinetics of swelling, bound and unbound waters and aqueous stability were determined experimentally. FESEM showed good miscibility between CS and PAN, FTIR showed no chemical interaction between CS and PAN; however, it did show a doublet for the sIPN, TGA showed improved thermal stability and swelling kinetic followed second order kinetics. The degree of swelling of the sIPN hydrogels samples at room temperature varied from ~2200 % (with a fair degree of stability (~30 %)) to ~1000 % (with high degree of aqueous stability (43 %)) with increase in the crosslinking time. The calculated unbound water (W_UB) max., for the blend was 52.3 % whereas for the bound (W_B) the max., was 41.9 %. However, for sIPN hydrogel films, the W_UB water decreased (max. 21.0 %) where as the W_B increased (max. 52.0 %). The decrease in W_UB and increase in the W_B is attributed to the formation of a compact structure and increase in the contact area between the water and polymers in sIPN hydrogels due to the induction of new water contacting point in these hydrogel films, respectively.     

Towards developing resistance to chickpea chlorotic dwarf virus through CRISPR/Cas9-mediated gene editing using multiplexed gRNAs

Journal of Plant Diseases and Protection - Mastreviruses are an emerging group of viruses transmitted by leafhoppers and infect both monocot and dicot plants. Chickpea chlorotic dwarf virus...     

Foliage‐applied sodium nitroprusside and hydrogen peroxide improves resistance against terminal drought in bread wheat

Terminal drought is threatening the wheat productivity worldwide, which is consumed as a staple food by millions across the globe. This study was conducted to examine the influence of foliage‐applied stress signalling molecules hydrogen peroxide (H₂O₂; 50, 100, 150 μm ) and nitric oxide donor sodium nitroprusside (SNP; 50, 100, 150 μm ) on resistance against terminal drought in two bread wheat cultivars Mairaj‐2008 and BARS‐2009. These stress signalling molecules were applied at anthesis stage (BBCH 61); drought was then imposed by maintaining pots at 35% water holding capacity. Terminal drought caused significant reduction in grain yield of both tested bread wheat cultivars; however, foliage application of both stress signalling molecules at either concentration improved the performance of both bread wheat cultivars. Maximum improvement in 100‐grain weight (12.2%), grains per spike (19.7%), water‐use efficiency (WUE; 19.8%), chlorophyll content index (10.7%), total soluble phenolics (21.6%) and free leaf proline (34.3%), and highest reduction in leaf malondialdehyde contents (20.4%) was recorded when H₂O₂ was foliage‐applied at 100 μm . Foliage application of SNP enhanced the grains per spike, 100‐grain weight and grain yield by 14.9%, 11.3% and 20.1%, respectively, than control. The foliage‐applied stress signalling molecules improved the accumulation of soluble phenolics, proline and glycine betaine with simultaneous reduction in malondialdehyde contents, which enabled wheat plants to sustain the biological membranes under stress resulting in better stay green (high chlorophyll contents) under drought. This helped improving the grain number, grain weight, grain yield, WUE and transpiration efficiency. In crux, foliage‐applied H₂O₂ and SNP, at pre‐optimized rate, may be opted to lessen the drought‐induced yield losses in bread wheat in climate change conditions.     

A study of water distribution from a branch to distributary canals: A case study of Gugera Branch,Punjab, Pakistan

This study was conducted on Gugera Branch of Lower Chenab Canal, Punjab, Pakistan. Sample distributaries off taking from Gugera Branch were selected for the study. The existing conditions of water distribution among the distributaries were studied. Field data were collected during the whole of 1988. Field observations suggested that the variability at the head of distributaries is much greater than the variability in the Gugera Branch under existing operational practices. The distribution of water among the distributaries is rarely in accordance with design criteria. Some channels get priority over other channels. The annual closure period varied from 17 to 41 days for different channels. The discharge at the head of distributaries remained lower than the standard operational range for 69 to 183 days in a year. The data suggested that a regulating gate at the head of the distributary can reduce discharge variation up to 2.4 times compared with a Karrees System (wooden stop logs used for water regulation). The data indicated that the adjustments in the head gate of a distributary on daily basis can substantially improve discharge conditions at the head of distributary. Rotational schedules are not being followed as per design and need to be improved. Most of the existing head discharge relationships of discharge measuring structures are not reliable. A frequent calibration of these structures is recommended.     

Synthesis and Characterization of Aqueous Chitosan-polyurethanes Dispersion for Textile Applications with Multipurpose Performance Profile

As the use of high performance textiles has grown, the need for chemical finishes to provide the fabric properties required in the special applications has grown accordingly. In this project, a series of water dispersible polyurethanes dispersion (CS-PUs) with multipurpose performance profile was developed using isophorone diisocyanate (IPDI), polyethylene glycol (PEG), 2,2-dimethylol propionic acid (DMPA) and chitosan (CS) for textile applications. In two step synthesis process, NCO functional PU prepolymers prepared by reacting IPDI, PEG, and DMPA were extended with varying molar quantities of chitosan followed by structural characterization through FTIR. The prepared CS-PU dispersions were applied onto the dyed and printed poly-cotton blend fabrics. The performance behavior of the treated fabric in terms of crease recovery, tear strength, tensile strength, and antibacterial properties was evaluated by applying standard test methods. These investigations show that the CS-PU dispersions can be applied as antibacterial textile finishes with significant improvement in the physical and mechanical properties of poly-cotton fabrics.     

Genetic variability and estimates of heritability in sorghum (Sorghum bicolor L.) genotypes grown in a semiarid zone of Sudan

A field experiment was conducted to evaluate nine genotypes of sorghum grown for two consecutive cropping seasons in 2006 and 2007 under rain-fed conditions in a semiarid zone at the Research Farm of El Fasher Research Station, Sudan. The objective of the study was to assess genetic variability and heritability among sorghum genotypes using phenotypic morphological traits. A randomized complete block design with four replications was used for the experiment. The grain yield (kg ha^?1), the number of heads/plant, followed by straw yield (kg ha^?1) had the highest genotypic coefficients of variation in both seasons. High heritability (above 95%) was shown for plant height in both seasons. High genetic advance was reported in straw yield, 1000-grain weight and days to flowering in both seasons. Highly significant differences among genotypes were found for all characters. The high-yielding genotype was Adv-Edo-CWS (E-9) with grain yields of 2780.6 kg ha^?1. Grain yield was significantly and positively correlated with straw yield (r = 0.91), number of heads/plant (r = 0.69), plant height (r = 0.53) and 1000-grain weight (r = 0.36). However, it was significantly and negatively correlated with days to 50% flowering (r = ?0.21). Based on their positive association with grain yield, the character’s straw weight, number of heads/plant, plant height and 1000-grain weight would be the preferable selection criteria for sorghum improvement program in the country.     

The Tolerance Index and Translocation Factor were Used to Identify the Barley Genotypes with High Arsenic Stress Tolerance

Ninety-four barley genotypes were used to investigate the genotypic differences in arsenic (As) uptake and translocation and their relationships with As tolerance index (TI) and translocation factor (TF). Two As treatments (300 µM and 500 µM) were applied in the initial screening and the confirmatory experiments, respectively. The results showed significant (p < 0.05) differences in tissue biomass, shoot height, root length, As TI and TF among genotypes. Based on As TI, 11 barley genotypes were selected and divided into 3 groups, i.e. tolerant, mildly tolerant and sensitive. There was more As uptake in the roots of the As tolerant genotypes, while the As sensitive genotypes contained more As in shoots, which was further proved by the greater TF. Significantly negative correlation was observed between shoot and root As concentration. The results showed that As tolerant genotypes are able to restrict the upward movement of As, thus developing their tolerance.     

Lead Toxicity in Cereals and Its Management Strategies: a Critical Review

Cereal grains such as wheat, rice, and maize are widely consumed as a staple food worldwide. Lead (Pb) is one of the non-essential trace elements and its toxicity in crops especially cereals is a widespread problem. The present review highlighted Pb toxicity in cereal and management strategies to reduce its uptake in plants. Lead toxicity reduced the cereal growth, photosynthesis, nutritional value, yield, and grain quality. The response of cereals to excess varies with plant species, levels of Pb in soil, and growth conditions. Reducing Pb bioavailability in the soil is a viable approach due to its non-degradability either by microbes, chemicals, or other means. Cultivation of low Pb-accumulating cultivars may reduce the risk of Pb toxicity in plants and humans via the food chain. Use of plant growth regulators, microbes, organic, and inorganic amendments might be promising techniques for further decreasing Pb contents in shoot and grains. Soil amendments along with selecting low Pb-accumulating cultivars might be a feasible approach to get cereal grains with low Pb concentrations. Furthermore, most of the studies have been conducted under controlled conditions either in hydroponic or pots and less is known about the effects of Pb management approaches under ambient field conditions.