Triploid Induction in the Yellowtail Tetra,Astyanax altiparanae,Using Temperature Shock: Tools for Conservation and Aquaculture

Triploidization is an interesting tool to produce sterile fish. In the yellowtail tetra, Astyanax altiparanae, this can be applied for aquaculture and surrogate technologies. In this study, we compared the efficacy of cold (2 C) or heat shock (38 C, 40 C, and 42 C) on triploid induction in the yellowtail tetra. The eggs were treated with cold or heat shock, 2 min postfertilization (30 min in cold shock or 2 min in heat shock). Intact embryos served as the control group. Ploidy status was confirmed by karyotyping, flow cytometry, and nuclear diameter of erythrocytes. The hatching rate decreased after cold shock (12.69 ± 15.76%) and heat shock at 42 C (0.35 ± 0.69%) in comparison with the control group (63.19 ± 16.82%). At 38 C and 40 C, hatching rates (61.29 ± 17.73% and 61.75 ± 22.1%, respectively) were not decreased. Only one triploid arose at 38 C (1/80). At 40 C, a high number of triploids arose (72/78). At 42 C, very few embryos developed into the hatching stage. A large number of haploid individuals arose after cold shock (61/75), with only one triploid. Our results indicate that heat shocking of embryos at 40 C is optimum for triploid production in the yellowtail tetra.     

Effect of trehalose supplementation in milk replacer on the incidence of diarrhea and fecal microbiota in preweaned calves

Trehalose, a nonreducing disaccharide consisting of d-glucose with α,α-1,1 linkage, was evaluated as a functional material to improve the gut environment in preweaned calves. In experiment 1, 173 calves were divided into two groups; the trehalose group was fed trehalose at 30 g/animal/d with milk replacer during the suckling period, and the control group was fed nonsupplemented milk replacer. Medication frequency was lower in the trehalose group (P < 0.05). In experiment 2, calves (n = 20) were divided into two groups (control group [n = 10] and trehalose group [n = 10]) based on their body weight and reared under the same feeding regimens as in experiment 1. Fresh feces were collected from individual animals at the beginning of the trial (average age 11 d), 3 wk after trehalose feeding (experimental day 22), and 1 d before weaning, and the fecal score was recorded daily. Fecal samples were analyzed for fermentation parameters and microbiota. The fecal score was significantly lower in the trehalose group than in the control group in the early stage (at an age of 14 to 18 d; P < 0.05) of the suckling period. Calves fed trehalose tended to have a higher proportion of fecal butyrate on day 22 than calves in the control group (P = 0.08). Population sizes of Clostridium spp. were significantly lower (P = 0.036), whereas those of Dialister spp. and Eubacterium spp. tended to be higher in the feces of calves in the trehalose group on day 22 (P = 0.060 and P = 0.083). These observations indicate that trehalose feeding modulated the gut environment and partially contributed to the reduction in medication frequency observed in experiment 1.     

Nutrient starvation affects expression of LC3 family at the feto-maternal interface during murine placentation

LC3 − the mammalian homolog of Atg8 − was found as autophagosome membrane binding protein in mammals and widely used as an autophagosomal marker. LC3A, B and C show different expression patterns in each tissue. The aim of this study was to reveal the differences of expression patterns among LC3 families in mouse placenta under normal condition and nutrient starving condition. LC3A and B were highly expressed in decidual cells. LC3A and B were increased in D14 compared with D12 and D16 in mouse placenta, while LC3C was decreased. Starvation induced increase in LC3B expression specifically. Immunohistochemistry showed different expression patterns among LC3A, B and C. LC3A expression in syncytiotrophoblast was vanished by starvation. The results of real time RT-PCR suggested differences between D12 and D16 in autophagic cascade induced by starvation. Taken together, this study suggests that autophagy could play a role in placental invasion system and that nutrient starvation affects LC3B expression.     

Rapid production of high-strength cement-bonded particleboard using gaseous or supercritical carbon dioxide

This study deals with the effects of curing treatment with gaseous and supercritical carbon dioxide on the properties of cement-bonded particleboard (CBP) manufactured by the conventional cold-pressing method. The hydration of cement and the mechanism of improvement were examined using X-ray diffractometry (XRD), thermal gravimetry (TG-DTG), and scanning electron microscopy (SEM) observations. The results are as follows: (1) The curing of cement was accelerated concomitantly with the improvement in mechanical and dimensional properties of CBP significantly by curing with gaseous or supercritical carbon dioxide. (2) Supercritical carbon dioxide curing imparted boards optimal properties at a faster rate than did gaseous curing. (3) Accelerated formation of calcium silicate hydrate and calcium carbonate and the interlocking of those hydration products on the wood surface are potentially the main reasons for the superior strength of carbon dioxide-cured boards.     

Hardness distribution on wood surface

For better understanding wood hardness, we developed a new hand-operated hardness tester that works with Brinell's method. With this tester we investigated the hardness distribution of wood minutely using a 2mm diameter ball tip. The following results were obtained: (1) On preliminary examination with medium-density fiberboard, we found that the value of Brinell's hardness decreased with the increase in the tip ball's diameter but that it was almost constant with the indenting velocity. (2) By using a small diameter tip, the difference of the hardness became clearer between earlywood and latewood. (3) With radial and tangential sections, we obtained hardness distribution patterns similar to those of wood grain. It seems that the hardness distribution reflects the distribution of density on wood surfaces.     

Distribution of boron in wood treated with aqueous and methanolic boric acid solutions

The distributions of boron in Japanese cedar (Cryptomeria japonica D. Don) sapwood blocks treated with aqueous or methanolic boric acid [B(OH)₃] solutions were explored through Raman spectroscopy and prompt gamma-ray analysis (PGA). B(OH)₃ was the sole boron species observed in Raman spectra of the wood blocks treated with either solution. Plots of weight gain of the treated wood blocks versus boron concentration in treatment solutions were found to be linear. The results indicated that the methanolic solution makes it possible to impregnate wood with much larger amounts of boron than the aqueous solution. PGA confirmed that B(OH)₃ was highly enriched near the end grains of the treated wood blocks. Raman measurements suggested that boron content in the bulk of the wood block is not as large as expected from the weight gain of the treated wood blocks when an ordinary air-drying method is used. It was concluded that the aqueous solution impregnates the cell walls of wood with boron more easily than the methanolic solution. Part of this report was presented at the 55th (Kyoto, March 2005) and 56th (Akita, August 2006) Annual Meetings of the Japan Wood Research Society. This article follows the previous rapid communication “Analysis of boron in wood treated with boric acid solutions using Doppler broadening method of prompt gamma-rays.” J Wood Sci (2006) 52:279–281     

A Comparison of the Effects of Two Prey Enrichment Media on Growth and Survival of Pacific Bluefin Tuna,Thunnus orientalis,Larvae

Three experiments were conducted to investigate the growth, survival, and standardized cohort biomass of Pacific bluefin tuna, Thunnus orientalis, larvae fed nutritionally enhanced prey during the first week of feeding using two commonly used, commercially available enrichment media, AlgaMac Enrich and Marine Glos. T. orientalis larvae exhibited exponential growth in standard length and dry weight. The daily specific growth rates in length and weight are the first reported for T. orientalis larvae and the averages ranged from 3.8 to 4.1% and 27.5%, respectively, for larvae in the AlgaMac treatment and from 4.1 to 6.1% and 31.5%, respectively, in the Marine Glos treatment. Average daily growth rates in length ranged from 0.16 to 0.23 mm/d for larvae in the AlgaMac treatment and from 0.17 to 0.27 mm/d for those in the Marine Glos treatment. Daily growth rates in length were similar to those reported for other tuna larvae reared in the laboratory but slower than most published estimates for larval tunas in situ at similar water temperatures. Mean prey number per gut was positively associated with mean prey level in the tank. Both enrichment media appear to be good sources of nutritional improvement of planktonic prey for T. orientalis larvae.     

A new locus for resistance to brown planthopper identified in the indica rice variety DV85

The brown planthopper (BPH) is one of the most destructive insect pests of rice. Resistant varieties have proved to be one of the most economic and effective measures for BPH management. In this study, an indica rice ‘DV85’ showed resistance to biotype 2 of BPH by bulked seedling test, and a recombinant inbred line (RIL) population derived from a cross between a susceptible rice ‘Kinmaze’ and ‘DV85’ was phenotyped to map genetic factors conferring BPH resistance in ‘DV85′. Composite interval mapping revealed that one quantitative trait locus (QTL) with a LOD score of 10.1 was detected between XNpb202 and C1172 on chromosome 11. This QTL was designated as Qbph11. Qbph11 explained 68.4% of the phenotypic variance of BPH resistance in this population. The allele from the resistant parent ‘DV85’ at Qbph11 reduced the damage caused by BPH feeding and would be very useful in breeding resistant rice varieties via marker‐assisted selection.