Impregnation of Norway spruce (Picea abies L. Karst.) wood by hydrophobic oil and dispersion patterns in different tissues

Wood from Norway spruce (Picea abies L. Karst.) is biologicallydegraded in exposed conditions. It also has anatomical featuresthat make it difficult to impregnate with preservatives by currentlyavailable industrial processes. In the study reported here,we used the new Linotech process to impregnate Norway sprucewood with hydrophobic linseed oil and then quantified its uptakeand dispersal in anatomically distinct wood tissues. We alsoinvestigated the effects of the wood moisture content on theresults of the impregnation. Samples (500 x 25 x 25 mm) weretaken from 15 trees in a coniferous forest in northern Sweden(64° 10' N, 160–320 m a.s.l.). The parameters forthe Linotech process were 2–3 h treatment time at 0.8–1.4MPa and 60–140°C. To determine the level of uptake,the linseed oil was extracted from the impregnated wood usingmethyl-tertiary-butyl-ether. The uptake was quantitatively analysedby comparing X-ray microdensitometry values obtained followingimpregnation both before and after oil removal. In earlywood,initial moisture content had an obvious effect on the impregnationresult. Six times more oil was taken up when the moisture contentwas greater than ~150 per cent than when it was less than 30per cent. Theoretical calculations, based on density levels,suggest that the water-filled porosity of the wood (water volumedivided by porosity volume) was positively correlated with thelinseed oil uptake, and more strongly correlated in earlywoodthan in latewood. There were also significant differences inuptake between different wood tissues; heartwood/mature woodand heartwood/juvenile wood showed 10–20 per cent weightincreases due to linseed oil uptake, compared with 30–50per cent in sapwood/mature wood. Examination by scanning electronmicroscopy confirmed these uptake patterns. The moisture contentafter impregnation was about 5 per cent, irrespective of theLinotech process parameters, tissue type and initial moisturecontent. In conclusion, the impregnation process used here resultsin high levels of well-dispersed linseed oil uptake and shouldfacilitate drying.     

Prediction of basic wood properties for Norway spruce. Interpretation of Near Infrared Spectroscopy data using partial least squares regression

This work was undertaken to investigate the feasibility of using near infrared spectroscopy (NIR) and partial least squares regression (PLS) as a tool to characterize the basic wood properties of Norway Spruce (Picea abies (L.) Karst.). The wood samples originated from a trial located in the province of Västerbotten in Sweden. In this trial, the effects of birch shelterwoods (Betula pendula Roth) of different densities on growth and yield in Norway spruce understorey were examined. All Norway spruce trees in each shelterwood treatment were divided into three growth rate classes based on diameter at breast height (1.3?m) over bark. Five discs were cut from each tree (i.e. from the root stem, and at 20%, 40%, 60%, and 80% of the total height). The discs from 40% tree height were used (i.e., where the largest variations in annual ring widths and wood density were found). A total of 27 discs were selected. The discs were used for measuring annual ring widths, wood density, average fiber length and the fiber length distributions. Milled wood samples prepared from the discs were used for recording NIR spectra. PLS regression was used to generate prediction models for the wood properties (Y-matrix) and NIR spectra (X-matrix) as well as between the wood properties (Y-matrix) and the fiber length distributions (X-matrix). One set of models was generated using untreated spectra and fiber length distributions. For a second set of models the structure in the X-matrix, which was orthogonal to the matrix described by the wood properties, was eliminated using a soft target rotation technique called orthogonal signal correction (OSC). The PLS model obtained using “raw” untreated NIR spectra and fiber length distributions had a poor modeling power as evidenced by the cumulative Q² values. For the PLS models based on untreated NIR spectra the cumulative Q² values ranged from a minimum of 16% (wood density) to a maximum of 46% (no. of annual rings). Orthogonal signal correction of the X-matrix (NIR spectra or fiber length distributions) gave PLS models with a modeling power corresponding to cumulative Q² values well in excess of 70%. The improvement in predictive ability accomplished by the OSC procedure was verified by placing four of the 27 observations in an external test set and comparing RMSEP values for the test set observations without OSC and with OSC.     

Effects of granivorous rodents on direct seeding of oak and beech in relation to site preparation and sowing date

Planting bare-rooted seedlings is a rather expensive method to regenerate oak (Quercus robur) and beech (Fagus sylvatica). Direct seeding could reduce artificial regeneration costs substantially, but the method currently suffers from a number of problems, one of which is seed consumption by rodents. In the present study clear-cut areas in southern Sweden were prepared using one of four different mechanical site preparation methods – disc trenching, patch scarification, topsoil removal or mounding – then manually sown with acorns and beech nuts. Acorns were sown in May and July 2006, and both acorns and beech nuts were sown in May 2007. Three years following sowing, best seedling establishment from viable acorns, 60–70%, was achieved after sowing in mounds in May, and the subsequent survival reached 90–100%. After the first growing season for beech, both seedling establishment and subsequent survival was lower than for oak, which coincides with a higher number of lost beech nuts at the excavation to investigate the fate of seeds. Granivorous rodents (Apodemus flavicollis, A. sylvaticus, Mus musculus, and Myodes glareolus) were live-trapped more frequently in the vicinity of slash piles compared to other micro-site features, such as uprooted stumps, snags and stones. In 2006, no connection was found between number of rodents captured and proportion of lost seeds, while in 2007 the two were in good accordance. No clear relationship was found between number of captured rodents, vegetation cover class and mechanical site preparation method. More rodents were captured in 2007 than in 2006, and there was an increase in captures from spring until late summer/autumn for both years, which was mirrored in the seedling establishment result from the three different times of sowing. Based on experiences from the present study the recommendation for successful direct seeding of oak on clear-cuts is a combination of mounding site preparation, removal of slash and sowing in May rather than July. However, the results indicate that successful direct seeding of beech is more difficult to achieve.     

Blood selenium in naturally fed horses and the effect of selenium administration

Blood Se of adult horses was 26.1, 25.8, and 27.0 ng/ml (mean values at 3 farms), where the Se of food was about 20 ng/g dry substance. Experimental adult horses which received about 41 ng Se/g food showed 45.3 ng/ml blood.At low Se intake suckling foals show higher blood Se than mares, but with high Se intake, the opposite will occur. This is reflected in milk Se, which raises but slowly with rise of mare’s blood Se.Se in blood plasma and in blood corpuscles is on the same level. The effect of various dose levels of Se on blood Se was studied: From 1.5 to 6 mg Se/week, blood Se rose rather linearity; 18 and 30 rag Se/week gave but slightly more effect than 6 mg.     

Mechanizsed microsite preparation and direct seeding of Pinus sylvestris in boreal forests — a way to create desired spacing at low cost

The main objective of this study was to examine the cost, flexibility, and appropriate scale of mechanized microsite preparation (MP), in combination with mechanical direct seeding of Pinus sylvestris L. with orchard seed. This technique was tested at four boreal forest sites in Northern Sweden. Orchard and stand seeds were sown with and without MP. The use of orchard seed increased seedling establishment by 41% and the use of MP increased seedling establishment by 47%, respectively, after two years. The best substrates for sowing when using MP were OA_h-, E- and BC-horizon, in ranked order. The use of orchard seed compared to stand seed increased mean seedling height by 25% after four years. These trials suggest that to obtain a density of 5,000 stems ha^-1 four years after seeding, 61,000 viable stand seeds or 41,000 orchard seeds ha^-1 should be sown if MP is not used. If MP is used, seeding rate could be reduced by about 32%. By using MP, and by further improving scarification technique so that all scarified area is thin OA_h-horizon, we predict that only 32,000 stand seeds or 22,000 orchard seeds ha^-1, i.e., half the dosage, should be needed. Under these optimal conditions, it would be necessary to sow about six and four germinable stand and orchard seeds, respectively, to ensure one seedling after four years. Furthermore, regeneration cost would be less than a third that of planting.     

Prevalence and interrelationships of hoof lesions and lameness in Swedish dairy cows

The prevalence of hoof lesions and lameness in 4899 heifers and cows was determined at claw trimming one time in a cross-sectional study on 101 Swedish dairy farms, 1996-1998. The percentage of affected animals was 41% for heel-horn erosion, 30% for sole haemorrhages, 27% for erosive dermatitis, 21% for abnormal claw shape, 14% for white-line haemorrhages, 8.8% for white-line fissures, 8.6% for sole ulcers, 3.3% for double soles, 2.3% for verrucose dermatitis, and 1.8% for interdigital hyperplasia (IH). Seventy-two percent of all animals had at least one hoof lesion. The prevalence of lameness was 5.1%; most hoof lesions did not cause lameness. Differences between herds were substantial; the herd-specific, animal-level prevalence of lesions ranged from 25 to 98% and of lameness from 0 to 33%. Sole haemorrhages were found in all herds. The proportion of variance at the between-herd level was particularly high for heel-horn erosion (62%) and abnormal claw shape (54%). Strong correlations between lesions were found within hooves (and animals), e.g. for heel-horn erosion and dermatitis (Spearman's rank correlation, r(s)=0.36 and 0.37, respectively) and for sole and white-line haemorrhages (r(s)=0.25 and 0.28). Most hoof lesions affected hind and front hooves bilaterally, whereas the correlation between hind and front hooves generally was lower. Herds that ranked high for prevalence of sole ulcer also ranked high for sole haemorrhages and for abnormal claw shape and herds that ranked high for dermatitis also ranked high for heel-horn erosion, verrucose dermatitis and IH. Abnormal claw shape was strongly associated with sole ulcer (r(s)=0.41 at cow level)-suggesting the importance of maintaining a correct claw shape for the prevention of hoof-horn lesions.     

Effect of radial increment core diameter on tracheid length measurement in Norway spruce

The effect of radial increment core diameter (comparing the effects of 12, 8 and 4 mm diameters, with sampling from chips used as a control) on the measurement of tracheid mean length and the percentage of broken tracheids was examined for mature wood of Norway spruce. Two methods of measuring tracheid length were used: image analysis, in which arithmetic mean length (AML) was calculated for unbroken tracheids, and the Kajaani FS-200, in which AML was calculated for all tracheids, regardless of damage. In addition to AML, length weighted mean length (LWML) was calculated for the Kajaani. Almost 70 % of all tracheids remained undamaged when the 12 mm increment core was used. This was 18 % units less than for chips. Proportion of broken tracheids increased as core diameter decreased, and for the 4 mm increment core 30 per cent of all tracheids remained undamaged. All increment core diameters tested gave LWML values that were significantly lower than the control. For AML by Kajaani, all mean values were about 50 percent lower than corresponding LWML or image analysis values, thus showing the direct influence of broken tracheids. However, only the 4 and 8 mm increment cores differed significantly from the control. For unbroken tracheids measured by image analysis, the 4 mm increment core gave a significantly lower value than the control, thus showing the indirect influence of broken tracheids. Values obtained from the 8 and 12 :mm increment cores did not differ significantly from the control.     

Pinus contorta growth in northern Sweden as affected by soil scarification

The aim of this study was to quantify the effects of different soil scarification methods on tree growth. Soil scarification influenced stem volume and stem biomass yield of lodgepole pine (Pinus contorta Dougl. var. latifolia Engelm.) in a 17-year-old field trial in boreal Sweden. Soil scarification (disc trenching, mounding and ploughing) resulted in an average stem volume yield of 3.1 and 34.2 m³ ha^–1 on the poor and intermediate sites, respectively, while corresponding values for no soil scarification were 0.9 and 16.7 m³ ha^–1. In comparison to no scarification, ploughing increased volume yields by 500% on the poor site and by 200% on the intermediate sites. The ranking according to stem volume yield was ploughing > disc trenching = mounding no soil scarification. Averaged over the two sites, the mean annual increment of stem biomass was 219% and 145% higher (in d.w., 0.26 kg and 0.34 kg per sample tree) after ploughing compared with no soil scarification, for the average and dominant sample trees, respectively. Although not significant, the increased growth rate after soil scarification decreased the average stem basic wood density of the sample trees with 1.6% and 5.3%, at the poor and intermediate sites, respectively. In conclusion, soil scarification significantly increased the 17-year stem volume yield compared with no scarification. The results also indicate that the difference in stem biomass yield between ploughing and the other methods, especially no soil scarification, will increase even more in the near future.     

Performance,health and behaviour of organic growing-finishing pigs in two different housing systems with or without access to pasture

Abstract

The effects of two housing systems (deep litter and straw-flow), with and without access to pasture during the summer period, were studied in an organic growing-finishing pig herd. Performance, health, skin lesions and daytime pig activity were studied in 29 pens of 16 pigs (total of 464 pigs, in 4 batches). Data from 21 pens were used for comparisons of deep litter and straw-flow and data from 16 pens for comparisons of access/no access to pasture. Pigs in the deep litter system had a lower carcass meat percentage (56.6% vs. 57.3%) and more locomotion problems (4.4% vs. 0%) than pigs in the straw-flow system. No difference in daytime pig activity was detected between the two housing systems. Under moderate temperatures, pigs with access to pasture and fed a commercial organic feed inside the building were not more active during daytime behaviour studies (7.30?h–16.30?h) than pigs without access to pasture. However, at 17 weeks of age the pigs with pasture access spent 21% of their time on pasture, less time inside the pig house (20% vs. 33%) and less time on the outside concrete area (4% vs. 12%) than the pigs without pasture. No difference in performance was detected between pigs with and pigs without access to pasture.