南果梨周年干物质与氮磷钾积累动态

【目的】明确南果梨干物质积累特征和氮磷钾养分周年动态积累规律,为南果梨优化施肥量和施肥时期提供依据。【方法】以12年生南果梨树为试材,采用田间采样和树体分解方法,分别于萌芽后10 d(萌芽期)、 30 d(花期)、 65 d(幼果膨大期)、 100 d(果实膨大或新稍停止生长期)、 130 d(果实着色前)、 155 d(果实采收期)、 185 d(采收后)、 210 d(落叶前)8个生育期,选干周和树高一致的3株树,将树体连根从土壤中挖出,分出果实、 叶片、 枝条、 主干、 主根、 侧根、 须根,各器官单独称重,并取200 g左右的鲜样按清水、 洗涤剂、 清水、 1%盐酸、 3次去离子水冲洗、 杀青、 烘干后,电磨粉碎过0.15 mm筛,测定样品中氮、 磷、 钾含量。【结果】1)南果梨周年生育期内,树体干物质当年净积累量为18.4 kg/plant,干物质累积速率出现两次累积高峰,分别是幼果膨大期(0.15 kg/d)和采收期(0.11 kg/d)。2)南果梨树体总氮周年积累量为154.0~301.0 g,新生器官为0~116.2 g,果实膨大期达到最高;多年生器官氮积累量为154.0~194.8 g,落叶前达到最高。3)南果梨树体总磷周年积累量为17.1~37.2 g,果实着色前最高。其中新生器官为13.7 g,果实采收期最高;多年生器官为17.1~24.9 g,果实转色期最高。4)南果梨树体总钾周年积累量为27.9~174 g。新生器官钾为97.3 g,采收期最高;多年生器官钾为27.6~76.6 g,落叶前最高。5)产量大约为17 t/hm2的12年生南果梨从萌芽到落叶前树体当年氮磷钾的单株净累积量分别为146.2、 20.1、 146.1 g,折合1000 kg果实经济产量需吸收氮(N)、 磷(P)、 钾(K)5.4、 0.7、 5.4 kg。【结论】南果梨周年干物质单株积累总量为41.4 kg,当年净积累量为19.7 kg。南果梨干物质积累主要集中在花期到果实膨大期和果实转色到落叶前,分别占47.3% 和47.5%。南果梨从萌芽到落叶前氮、 磷、 钾的单株净累积量分别为146.2、 20.1、 146.1 g,每1000 kg果实经济产量需吸收氮(N)、 磷(P)、 钾(K)5.4、 0.7、 5.4 kg。从开花到果实膨大期和从果实着色到采收后30天对氮吸收分别占总氮累积量的39.0%和49.0%,而磷、 钾的累积从萌芽到开花较快,到果实膨大期磷的累积达67.4%,钾的累积达65.1%,果实膨大期是干物质和氮磷钾积累的关键时期。     

欧美杂交杨Pnd-LRR3基因克隆及其抗锈菌侵染表达

为深入探究欧美杂交杨(Populus nigra×P.deltoides)感病的分子机理,以及抗病基因在发病过程中所起的作用,克隆了欧美杂交杨LRR3蛋白编码基因Pnd-LRR3。对Pnd-LRR3基因进行了生物信息学分析,并对其在抗锈菌过程中的功能进行了研究。Q-PCR结果显示,强致病性的落叶松-杨栅锈菌(Melampsora larici-populina)E4菌株接种6 h,Pnd-LRR3基因表达量上调增幅较大,168 h为显著下调。说明Pnd-LRR3基因在E4侵染过程中起到一定抗性作用,但最终无法阻止锈菌的侵染。     

9株绵羊肺炎支原体内蒙古分离株P113基因克隆及蛋白序列分析

[目的]克隆绵羊肺炎支原体内蒙古分离株P113基因,比对、分析不同菌株P113蛋白序列,为研究绵羊肺炎支原体P113蛋白的生物学功能提供参考。[方法]设计绵羊肺炎支原体P113基因特异性引物,采用PCR方法扩增9株绵羊肺炎支原体内蒙古分离株的P113基因片段;对获得的9株绵羊肺炎支原体P113基因片段进行测序分析,将DNA序列翻译为氨基酸序列,对不同菌株的P113氨基酸序列进行比对。[结果]不同分离株P113基因片段扩增产物大小不同。氨基酸序列分析显示,C末端序列重复区域长度存在差异,以KKAEGA（S）QNQG为主要重复序列单元。不同菌株重复序列单元数量不同,NM01-MO株和CK-MO株的重复序列单元数量最多,为16个;LK-MO株重复序列单元数量最少,为3个;多数菌株之间重复序列单元数量差异较大。[结论]绵羊肺炎支原体内蒙古分离株P113氨基酸序列的C末端重复序列单元数量不同,这些不同数量的重复序列影响P113蛋白结构,进而可能影响其生物学功能。     

施磷水平对菊芋块茎产量、品质、植株生理特性与磷利用率的影响

探究不同磷肥施用量对菊芋块茎产量、品质、植株理化特性及磷肥利用率的影响,为实现菊芋高产优质栽培和农田磷素高效利用与科学施磷提供参考依据。于2019-2020连续两年分别于河南省原阳县和方城县布置磷肥用量田间试验,2019年设0、60、120、180和240 kg P₂O₅·hm^-2 5个磷肥用量水平,2020年则分别设0、45、90、135、180和225 kg P₂O₅·hm^-2 6个施磷水平。研究磷肥施用对成熟期菊芋块茎产量、品质（菊糖、还原糖含量）以及营养生长和生殖生长期地上部植株磷素积累量、叶片绿原酸、SPAD值、可溶性糖、可溶性蛋白含量等理化指标的影响,计算分析菊芋收获指数、磷肥利用率和农学效率等肥料吸收利用状况。结果表明：磷肥供应均显著提高2019和2020年菊芋块茎产量,肥料效应呈“线性+平台”趋势变化,适宜施磷量分别为155和107 kg·hm^-2。此外,磷肥供应显著提高菊芋块茎菊糖和还原糖含量。与不施磷相比,2019-2020年度块茎总糖含量增幅分别平均为11.6%和18.3%。各生育期菊芋地上部植株磷素积累量、叶片绿原酸含量、SPAD值、可溶性糖和可溶性蛋白含量均随施磷量增加而明显提高。菊芋磷素收获指数（PHI）、磷肥利用率（AUP）和农学效率（AEP）均随着磷肥用量增加而明显下降,施磷处理两年平均PHI、AUP和AEP分别为0.813、15.1%和23.9 kg·kg^-1。因此,合理施磷可显著提高菊芋成熟期块茎产量、改善品质,增强各生育期生理活性。在本试验条件下菊芋适宜施磷量为105~150 kg·hm^-2。     

桃铁离子吸收动力学研究

以毛桃幼苗为试材，对不同铁形态、pH值和盐胁迫条件下铁离子吸收动力学特性进行了研究。结果表明，pH是影响铁吸收的主要因素，不同铁形态的有效性随pH的变化而变化；pH和铁形态影响桃铁离子吸收动力学参数Km和Imax；NaCI胁迫对盐敏感性植物（桃）铁吸收特性的影响，可能与质膜透性、载体系统活性以及介质中有效铁含量有关。     

杂交稻野败胞质对稻瘟病菌、白叶枯病菌感病性的研究

选用3个水稻野败胞质不育系及相应的保持系,3个恢复系及它们相应的野败胞质代换系,这些不育系、保持系同恢复系配组的18个 F_1,分别在秧苗期接种属我国7个稻瘟病生理小种群的21个菌株;在成株期接种15个白叶枯病菌株。结果表明,野败胞质较之正常胞质表现对这两种病菌感病稍轻;这种差异在多数保持系的基因型背景下达到显著水准,     

The Tripartite Symbiosis Formed by Indigenous Arbuscular Mycorrhizal Fungi, Bradyrhizobium japonicum and Soya Bean Under Field Conditions

The tripartite symbiosis formed by indigenous arbuscular mycorrhizal fungi (AMF), Bradyrhizobium japonicum (Kirchner) Jordan and soya bean (Glycine max L. Merr. cv. Evans) was investigated under field conditions to test the hypotheses that: (i) the tripartite symbiosis enhances nodulation and nodule activity; and (ii) its establishment does not rely on improved phosphorus (P) uptake through the fungal partner. Soil tillage was used to produce treatments with contrasting AMF colonization potentials while the amount of B. japonicum inoculum was kept constant. Nodulation, AMF colonization and the P and nitrogen (N) nutrition of plants were evaluated at 10 and 51 (full‐bloom) days after emergence. N₂ fixation was estimated by the difference method and by the isotopic dilution method. At the early stage of plant growth, AMF hyphal colonization and nodulation were, respectively, 16 % and 33 % greater in plants from untilled than from rototilled soil. The establishment of the tripartite symbiosis was observed under field conditions, and factors other than P nutrition were critical to its formation. However, the tripartite symbiosis did not promote N₂ fixation under the high soil P conditions of this study.     

An extended interspecific gene pool available to peach and almond breeding as characterized using simple sequence repeat (SSR) markers

Genetic diversity, as revealed by eighteenSimple Sequence Repeat (SSR) markers inthirty almond [P. dulcis (Mill.) D.A.Webb], twenty fresh-market peach [Prunus persica (L.), Basch], fifteenprocessing clingstone peach cultivars, andten rootstocks, established the geneticrelatedness among cultivars andcharacterized the variation within andbetween species. One accession each of thewild Prunus species, P.davidiana [(Carriere) Franch] and P.webbii [(Spach.) Vieh.], was included inthe analysis. The number of presumedalleles revealed by the SSR analysis rangedfrom one to six in peach whereas almondcultivars showed a range of three to nine.Peach cultivars clustered into ten groups,which are in general agreement withdocumented origin. Most processingclingstone peach cultivars clusteredseparately from fresh-market freestonecultivars supporting a distinct origin. Twomajor clusters were observed in almond withone containing California cultivars and theother containing European cultivars and theimportant California cultivar Mission.Results establish the value of SSR markersfor distinguishing different geneticlineages and characterize an extensive andlargely unexploited inter-species gene poolavailable to peach and almond breedingprograms.     

长期施肥对红壤磷组分及活性酸的影响

以12年的红壤长期肥力监测定位试验不同处理土壤为材料,研究了连续施肥对土壤磷组分、土壤对磷吸附解吸、土壤活性酸铝的影响。连续施用化学磷肥和化肥加有机肥,均可提高土壤全磷、无机磷数量。施用有机肥料,土壤中的磷以Ca-P和Al-P积累为主要表现形式,化学磷肥的施用能够提高土壤的全磷,并以Al-P增幅为最大,在所有处理中均表现为土壤O-P相对稳定。有机肥料处理土壤对外源磷的吸附强度明显少于施用化学磷肥和不施用磷肥的处理,有机肥料能够显著提高吸附磷的再利用,在NPKM处理中解吸磷占吸附磷的47.72%,M处理中占42.89%,其它处理中解吸磷占吸附磷数量一般少于8%。MNPK、M处理的PFI为2.51、2.69比N、NP处理4.53、4.37明显降低。在红壤旱地长期施用化学肥料,土壤交换性酸铝成倍增加,土壤酸化严重;施用有机肥料、有机肥料与化学肥料配合施用,土壤交换酸铝表现稳定。     

The Storage of Tree Data Structure by Gradation and Classification and Application in CAD for Engineering Structure

The traditional storage of tree data structure is according to the relation of the elements' frant-and-back. Since it is difficult to define the frant-and-back relation of graphics units in CAD for Engineering structure, the application of the tree structure becomes inconvenient. The authors change the storing method for the tree structure into gradation and classification. And a graded equivalence relation of graphics units is brought forward, which grade the graphics units with the equivalence relation. By using this storing method, we can easily accomplish some operations, such as picking up the subtree with a certain character, deleting a node, insert a graded and classified node, etc. The example provided indicates that the storage by gradation and classification can speed up searching and process the data of the subtree by gradation and classification expediently. This kind of storing method for the tree structure is applicable for data which contain the graded equivalence relation.