地热农副产品干燥装置的设计和中间试验

本文根据干燥过程的理论分析和试验研究结果,提出了热风式干燥器设计参数的选择原则,给出一套有一定参考价值的干燥系统的计算方法。该方法概念清楚,不必计算废气排热损失,简化了计算过程。依此,我们设计制造了一套地热干燥中间试验装置,它利用60～70℃的地热水作热源,一次可投湿物料200kg,对于像白菜这类初含水率在90％以上的物料,其每小时最大干燥脱水量超过30kg,平均热效率达到53％。试验结果表明:只有当物料的含水率在90％以上,且表面结合水多的情况下,实际过程才会出现等速干燥阶段。     

华北地区冬小麦优化灌溉的水分指标与节水性,抗逆性分析

介绍了冬小麦优化灌溉的水分指标及传统灌溉的区别，并在总结分析试验研究结果的基础上用对比的方法阐述了优化灌溉的节水，节能，抗逆和增产原理。     

Development of on-line measurement system of bulk density based on on-line measured draught, depth and soil moisture content

On-line measurement of soil compaction is needed for site specific tillage management. The soil bulk density (ρ) indicating soil compaction was measured on-line by means of a developed compaction sensor system that comprised several sensors for on-line measurement of the draught (D) of a soil cutting tool (subsoiler), the soil cutting depth (d) and the soil moisture content (w). The subsoiler D was measured with a single shear beam load cell, whereas d was measured with a wheel gauge that consisted of a swinging arm metal wheel and a linear variable differential transducer (LVDT). The soil w was measured with a near infrared fibre-type spectrophotometer sensor. These on-line three measured parameters were used to calculate ρ, by utilising a hybrid numerical–statistical mathematical model developed in a previous study. Punctual kriging was performed using the variogram estimation and spatial prediction with error (VESPER) 1.6 software to develop the field maps of ρ, soil w, subsoiler d and D, based on 10 m × 10 m grid. To verify the on-line measured ρ map, this map was compared with the map measured by the conventional core sampling method.

The spherical semivariogram models, providing the best fit for all properties was used for kriging of different maps. Maps developed showed that no clear correlation could be detected between different parameters measured and subsoiler D. However, the D value was smaller at shallow penetration d, whereas large D coincided with large ρ values at few positions in the field. Maps of ρ measured with the core sampling and on-line methods were similar, with correlation coefficient (r) and the standard error values of 0.75 and 0.054 Mg m⁻³, respectively. On-line measured ρ exhibited larger errors at very dry zones. The normal distribution of the ρ error between the two different measurement methods showed that about 72% of the errors were less than 0.05 Mg m⁻³ in absolute values. However, the overall mean error of on-line measured ρ was of a small value of 2.3%, which ensures the method accuracy for on-line measurement of ρ. Measurement under very dry conditions should be minimised, because it can lead to a relatively large error, and hence, compacted zones at dry zones cannot be detected correctly.     

针型电容法测量谷物含水率的研究

采用针型电容传感器和测量电路,并采取减小介质损耗的有效措施,研制了测量谷物含水率的针型电容法。实验结果表明,在谷物含水率与输出电压间具有良好的线性关系。该方法具有较高灵敏度、稳定性和良好的动态特性,完全可以满足谷物含水率的测量要求,为谷物含水率的准确、快速和在线测量提供了一种有效的方法。     

单组分快速湿固化聚氨酯木材胶黏剂的研制

针对30min内胶接桦木生材(含水率在60%～90%)集成木方的生产需要,采用聚醚多元醇、多亚甲基多苯基多异氰酸酯(P-MDI)为主要原料制备单组分快速湿固化聚氨酯木材胶黏剂,以表(?)时间,常温凝胶时间和干、湿状压缩剪切强度为指标,通过正交试验确定合成工艺的主要参数:—NCO:—OH摩尔比值(R)大小、聚乙二醇(PEC)分子量大小和溶剂量与增塑剂量的比例,探讨了各项因素对胶黏剂性能的影响,并根据实际生产需要,优化出最佳方案。结果表明:所合成胶黏剂压制桦木生材集成木方的主要性能指标,均超过日本JISK6806—2003Ⅰ类板的标准要求。     

谷物介电性质及其在含水量测量中的应用

对谷物介电性质的概念,测量方法、影响因子和预测模型进行了综述、介绍了利用介电性质测量谷物含水量的方法以及近期研究动向。     

热泵干燥过程中竹荚鱼水分迁移特性

以竹荚鱼为试验材料,对热泵干燥过程中鱼片的内部温度分布和水分迁移特性进行了研究.结果表明:热泵干燥过程的大部分时段中(干燥中、后期),竹荚鱼片内部温度分布比较均匀,基本未呈现出整体性的温度梯度.干燥过程中,竹荚鱼片沿厚度方向存在含水率梯度,并且随着干燥温度、风速的变化而变化.热泵干燥前期,鱼体干燥速度取决于鱼体表面水分蒸发的速度;干燥后期,干燥速度取决于鱼体内部水分移动的速度.热泵干燥过程中,竹荚鱼片的水分迁移主要是含水率梯度的作用.     

中纤板生产中红外水分测定仪在线检测应用影响因素浅析

通过在中密度纤维板生产线中TIR-E四光束红外水分测定仪的调试和应用，分析了可能影响其检测精度的一些因素，并提出了在使用中的注意事项。     

气象条件与垂穗披碱草再生性关系的研究

利用河南县牧气观测资料 ,根据垂穗披碱草的生物学特性 ,探讨牧草的再生能力与积温、草原干湿指数、产草量的关系 ,可作为科学利用草场 ,合理轮牧的依据。     

分阶段储粮降温通风的比较研究

采用试验观测的方法,对钢板仓仓储小麦分别进行不通风、两阶段和三阶段降温通风研究和分析。研究发现,相对于秋季两阶段通风而言,夏季增加一个通风阶段更有利于提高降温效果。在为期两年的试验中,在夏季合适的气温条件下,用较小的通风量进行降温通风,小麦有足够的时间与温度低于24℃的空气接触达到冷却的目的。然而,由于夜间空气温度低、湿度大的特点导致粮食最终温度高于24℃,同时由于送风湿度大的原因,粮食的水分也会相应增大。