钠水平及种类对肉鸡生长性能、胴体性状及血清矿物质水平的影响

文章旨在评估日粮钠水平及种类对肉鸡生长性能、胴体性状及血清矿物质水平的影响。试验选择平均初始体重一致的白羽肉仔鸡832只,随机分为8组,每组4个重复,每个重复26只鸡。试验日粮采用4×2因子设计,即日粮钠水平分别为1.5、2.4、3.3和4.2 g/kg,以小苏打和硫酸钠两种形式添加,试验共进行42 d。结果:1~10 d肉鸡的增重和采食量受钠盐水平及钠盐水平与种类交互作用的显著影响(P<0.05),在1~10 d时,硫酸钠组日增重和采食量最高(P<0.05)。同时,在整个试验期间(1~42 d),2.4 g/kg硫酸钠显著改善了增重(P<0.05)。随着钠水平的升高,血液pH表现为显著升高(P<0.05),硫酸钠组血液pH显著高于小苏打组(P<0.05),硫酸钠组腹脂占比较小苏打组显著提高2.23%(P<0.05)。4.2 g/kg钠水平组血清钠和钙浓度最高(P<0.05),3.3 g/kg钠水平组血清钾、氯和镁浓度最高(P<0.05)。与小苏打组相比,硫酸钠组血清钾水平显著降低0.33%(P<0.05),而血清钙浓度显著提高9.2%(P<0.05)。结论:日粮中钠以硫酸钠的形式添加2.4~3.3 g/kg可改善1~10 d肉鸡的生长性能,而在33~42 d时降低日粮钠水平可以使肉鸡获得最大的增重和采食量。     

青藏高原典型高寒荒漠生长季蒸散及水分消耗特征研究

为探究青藏高原典型高寒荒漠下垫面水分消耗规律,以2019年青藏高原典型高寒荒漠地区沱沱河站监测的涡动数据和微气象数据为基础,分析不同时间尺度蒸散值的变化特征和下垫面水分消耗特征,研究结果表明：小时平均蒸散发量最大值出现在14—15时,达0.46 mm·h^-1;日蒸散值最大值出现在7月7日,为8.58 mm·d^-1,最小值出现在4月2日,为0.30 mm·d^-1;整个生长季蒸散值呈先增加后减小趋势,其中7月份最大,为120.68 mm,4月份最小,为64.80 mm;生长季总蒸散发量为581.15 mm,平均每天蒸散4.01 mm。整个生长季累计降水量为235.70 mm,蒸散发量与降水量（Precipitation,Pr）的差值（The difference between ET and Precipitation,IETP）显示,2019年青藏高原典型高寒荒漠植被生长季（4—8月）水汽交换以下垫面水分消耗为主。     

‘钱德勒’等4个北高丛蓝莓品种在南京地区的引种表现

通过对2015年种植于南京地区的4个北高丛优良蓝莓品种‘钱德勒’、‘甜心’、‘布里吉塔’和‘埃利奥特’的生长量、物候期以及果实外观和品质特征的调查发现,结果发现,布里吉塔和埃利奥特的适应性较强,生长量大,坐果率高,在较好的管理条件下,可以取得较高的产量;钱德勒和甜心的适应性中等,坐果率及产量中等或偏低。甜心属于极早熟品种,5月下旬成熟,钱德勒和布里吉塔属于中熟品种,6月上旬成熟,埃利奥特属于晚熟品种,6月中旬成熟。钱德勒和布里吉塔属于大果,甜心属于中果,3个品种的鲜食品质极佳,感官评分在南京地区种植的近60个品种中名列前茅。埃利奥特属于中果,鲜食品质中等。综合来看,布里吉塔在南京地区适应性好,果实品质佳,具有较大的发展潜力,钱德勒和甜心的果实鲜食品质极佳,但适应性中等,可少量种植,埃利奥特的适应性较好,果实品质中等,可酌情推广。     

非洲猪瘟疫情防控难点与对策

目前肉制品的健康情况备受人们关注,而猪肉是人们餐桌上必不可少的肉制品之一,猪只的安全饲养对人类的生命健康有重要的影响。在饲养猪只中,可发生多种传染病,其中最主要的一种是非洲猪瘟,该传染病不仅具有高热性的特点,还具有高度接触性的特点,再加上目前对于该种疾病还没有特效的疫苗,以及有效的治疗措施,因此,做好该种疾病的预防工作至关重要。该文主要论述非洲猪瘟进行论述,并制定相应的防控措施。为减少猪只发病几率奠定良好的基础。     

抗青枯病樱桃番茄品种的初步筛选及评价

对28个樱桃番茄品种的田间抗病性、植株类型、单果质量、果色、可溶性固形物含量等主要经济性状进行调查。试验结果表明,感病品种红艳发病最重,发病率为73.67%,其次是红箭、红日和金艳,发病率分别为23.33%、21.67%和20.33%,其他品种发病率都在20%以下;28个品种的果实颜色、大小、口感等差异明显,除黑宝石映泰及黄金蛋可溶性固形物含量在4.10%以下外,其他品种可溶性固形物含量都达5.20%以上。综合分析,筛选出绿天使、粉仙、红娘9号、绿圆、格丽贝、红椭圆等11个抗青枯病且经济性状优良的樱桃番茄品种,为优质抗青枯病樱桃番茄的选育和推广提供了参考。     

Nonlinear Characteristic Modeling of Servo Value on Hydraulic Bending Roll System''s Dynamic Characteristic

Nonlinear characteristic of servo value is the important factor influencing hydraulic system, the model of electro-hydraulic servo pressure control system is designed. In this model, flux-equation of servo valve is specially applied and some non-linear characteristics are considered. Furthermore, SIMULINK toolbox of MATLAB language software is applied to solve mathematic model and simulation curves of some variables are obtained. The calculation results are in good agreement with the experimental results.     

DYNAMIC ANALYSIS OF SPINDLE

In this paper, taking a D1201 spindle as an example, we discuss the dynamic analysis of spindle by using the theory of the complex model, we also analyse the factors which effect the dynamic characterics of spindle and give results which arc reference value to improving the structure of spindle,     

CAD Environment for Quoting Utility Boiler Based the Characteristic Construction

The authors discuss such questions for utility boiler as the complicated flameworks,combined quoting course, long cycle, hardly controlling the quoting veracity and so on. Based on the construction diagram of quoting design for utility boiler, Which is into the boiler sketch's construction and parameter characteristic. They are furnace construction, big screen superheater, high temperature superheater, low temperature superheater, high temperature reheater, low temperature reheater, economy coal implement, common use sign and standard sketch in boiler sketch, etc. According to demand of the quote design for utility boiler, the CAD environment of quoting system based on characteristic construction and parameter are developed. Total construction of this environment , developing characteristics and function of this system are given.     

Simulation of High Pressure Startu Poil Pum Pof Turbine

Dynamic mathematical model, which is based on the character of the 200 MW tubine lbricating oil system, is established by means of modularization. On the basis of dynamic mathematical models, simulation model of the startu Pprocess of hign pressure startu Poil pum Pis created with the Visual Fortran language. The validity of this model has been verified by the simulation experiments and analysis. The simulation helps to forecast the dynamic characteristic to high pressure startu Poil pum Pand have some directive significance to design method of lubricating oil system.