不同种植密度对机采辣椒品种性状和产量的影响

为明确不同种植密度对机采辣椒品种性状、产量的影响,以适宜机采的辣椒‘辣研102’为研究对象,设置4个种植密度（P0:38 480株/hm²、P1:51 307株/hm²、P2:76 961株/hm²、P3:102 615株/hm²）,分别于贵阳、遵义两地开展田间小区试验。结果表明,随着种植密度的增加,辣椒株高呈增加趋势,茎粗呈下降趋势。辣椒根部、地上部生物量均在高密植条件下（P3）时达到最小。辣椒的发病率与病情指数均随种植密度的增加而显著提高,高密植处理条件下（P3）达到最大,发病率分别为41.67%（贵阳）、43.33%（遵义）,病情指数分别为31.05%（贵阳）、29.86%（遵义）。过高的种植密度导致单株辣椒光合作用大幅下降:P1、P2、P3处理条件下光合速率分别较P0处理显著降低13.94%、24.73%、29.66%（遵义）;P1、P2、P3处理条件下辣椒叶片蒸腾速率较P0降低10.02%、19.81%、42.12%（贵阳）。辣椒总产量随种植密度增加而显著提高,而商品果产量随种植密度的增加呈先增加后降低的趋势。商品果产量在P1条件下获得最大值,相对于P0、P2、P3贵阳辣椒商品果产量显著提高了16.43%、32.81%、41.67%,遵义提高了20.25%、26.67%、61.02%。综合辣椒生长与商品果产量,贵州机采辣椒‘辣研102’最佳种植密度为51307株/hm²。     

不同阶段猪用颗粒饲料物理性能的对比分析

对某饲料厂不同阶段猪用4种颗粒饲料的物理性能包括直径、长度、硬度、容重、含粉率和耐久性指数（Pellet Durability Index, PDI）等进行测定,对结果进行归类总结并采用统计学的方法参照有关标准进行分析。结果表明,4种颗粒饲料直径在2.87~3.94 mm之间,母猪料直径最大,小猪料最小,两两之间差异显著（P<0.05）,而且随着猪只年龄的增加,颗粒饲料的直径呈递增趋势。颗粒长度在8.62~11.94 mm之间,以大猪料最长,小猪料最短,长径比偏高。颗粒硬度在3.86~6.47 kg之间,以大猪料最大,小猪料最小,中小猪料显著低于大猪料和母猪料（P<0.05）,只有小猪料符合有关要求。颗粒容重在576.7~614.6 g/L之间,母猪料最大,小猪料最小,两两之间差异显著（P<0.05）,与直径呈相同的增减趋势。含粉率以小猪料最大,且只有小猪料与大猪料之间差异显著（P<0.05）。颗粒PDI以大猪料最大,小猪料最小,各阶段猪料的含粉率和PDI均符合有关要求。建议饲料厂家注重颗粒饲料物理性能指标的控制,调整饲料配方和工艺参数,不断改进颗粒饲料的质量。     

Threats to at-risk salmonids of the Canadian Rocky Mountain region

Trout and charr, members of the salmonid family, have high conservation value but are also susceptible to anthropogenic threats in part due to the specificity of their habitat requirements. Understanding historical and future threats facing these species is necessary to promote their recovery. Of freshwater trout and charr in the Canadian Rocky Mountain region, westslope cutthroat trout (Oncorhynchus clarkii lewisi), bull trout (Salvelinus confluentus; a charr species) and Athabasca rainbow trout (Oncorhynchus mykiss) are of conservation concern. And indeed, range contractions and declining populations are evident throughout much of their ranges. Range contraction was most evident in the southern Alberta designatable unit (DU) of westslope cutthroat trout. Diminished populations were also evident in the downstream watersheds of the Alberta bull trout range, and throughout the Athabasca rainbow trout range. We assessed historical and future threats to evaluate the relative importance of individual threats to each DU and compare their impact among species. Individual threats fall into the broad categories of angling, non-native species and genes, habitat loss and alteration, and climate change. Severity of each threat varies by DU and reflects the interaction between species’ biology and the location of the DU. Severity of threats facing each DU has changed over time, reflecting extirpation of native populations, changes in management and industry best practices, expansion of non-native species and progressing climate change. The overall threat impact for each DU indicates a high probability of substantial and continuing declines and calls for immediate action.     

动物饲料国际贸易、养殖密度与环境氮磷平衡的关系

粮食和饲料的国际贸易促进了许多国家农业生产系统的专业化和集约化。专业化动物养殖越来越多地依赖进口大豆和玉米,虽然提高了动物生产力,但也促使作物和动物生产系统在空间上的分离。本文综述了几十年来全球范围内大豆和玉米的贸易变化,并将其与养殖密度和整个食品系统中营养平衡的变化联系起来。这一变化与不同的营养管理条例的差异和动物饲养密度的空间变化有关。深入解析这些变化有助于理解动物饲料国际贸易、养殖密度与氮磷平衡之间的复杂关系。     

Compatibility of root growth and tuber production of potato cultivars with dynamic and static water‐saving irrigation managements

The important root characteristics of root length density (RLD) and root mass density (RMD) generally differ among irrigation managements and potato cultivars. The objective of this study was to investigate the RLD and RMD variations and their functional relationships with gross potato tuber yield for two commercial potato cultivars, Agria and Sante, under different irrigation strategies. Full irrigation and water‐saving irrigation strategies, deficit and partial root drying irrigations, were applied statically (S) and dynamically (D) based on daily crop evapotranspiration. Results showed that SPRD had significantly greater RLD (3.64 cm/cm³) and RMD (132.7 μg/cm³) than other irrigation treatments. Between the potato cultivars, Agria had significantly larger values of RLD (3.50 cm/cm³) and RMD (138.7 μg/cm³) than Sante. The functional relationship between the root growth characteristics and tuber yield showed that under water‐saving irrigations, Agria increased root mass at the expense of gross tuber yield but Sante increased root mass to maintain larger gross tuber yields. However, Agria produced more roots and gross tuber yield than Sante, and it is concluded that Agria is a more drought‐tolerant potato cultivar, which is recommended for tuber production in regions where water might be scarce. It was shown that larger root production in potatoes was associated with improved tolerance to water stress.     

减氮条件下密度对望两优361产量的影响

为探索减氮条件下密度对望两优361产量的影响,2018年在马庙镇进行了该试验。试验结果表明：怀宁县单季稻施肥量应为：N:P:K=13.5:5.4:10.8。在此施肥量的基础上： 1.5万穴/667m_²为最佳移栽密度。     

浅谈几种概率分布之间的相互关系

本文简述了几种常用的概率分布之间的相互关系     

Acoustic evaluation of the vertical distribution of dwarf ayu Plecoglossus altivelis altivelis in Lake Biwa

SUMMARY: The vertical distribution of dwarf ayu Plecoglossus altivelis altivelis in the pelagic waters of Lake Biwa was evaluated from June to September in 1995–97 from eight acoustic surveys using a quantitative echosounder. In each survey, echoes from a depth range of 3 m to the sea bottom were collected at a station every 2.7 s for 24 h together with measurements of vertical profiles of water temperature and chlorophyll-a. The ayu's echoes were identified using an underwater video camera. The ayu were observed near the maximum chlorophyll-a depth and above the thermocline. Their density was highest at depths of 4–11 m with 2–4 individuals/m ³ and was almost zero below 20 m. Echo signs were recorded as having a frequent duration of more than 1 h at night, whereas were of a shorter duration in the day. The fish stay in the epilimnion during the day without any clear vertical migration, but are distributed more uniformly at night. The advantages of remaining in the epilimnion are discussed in terms of food availability and predator avoidance.     

中密度纤维板砂光机的改进及降耗

笔者分析了中密度纤维板砂光机消耗较高、质量较差的原因，提出了改进措施。实施结果表明，砂光机运行正常，砂光产量和质量同步提高，消耗和成本下降，污染减轻。