THE STUDY OF STRAIN FATIGUE CRACK PROPAGATION BEHAVOURS OF VANADIUM BEARING HSLA STEEL

In this paper, the strain fatigue: crack propagation rates of vanadium bearing HSLA steel with different micro-structures are measured under constant load conditions, and the relationship between the crack propagation rate and the microstructures of steel is also studied.     

Performance Analysis of Anti-CW Interference in MC-CDMA Systems

The multicarrier-code division multiple access (MC-CDMA),which is the combination of direct sequence CDMA (DS-CDMA) and orthogonal frequency division multiplexing (OFDM) techniques, offers various advantages over single-carrier CDMA system. Some of the advantages are that MC-CDMA systems possess can remove the intersymbol interference (ISI) and enhance narrow-band interference suppression capabilities. So the MC-CDMA technique becomes a focus in the field of mobile communication. The authors introduce the typical MC-CDMA system model, discuss the decision statisticalvariable in Rayleigh fading channel included the CW interference, and give the expressions of probability of error in uplink. An approach is proposed with Modified Equal Gain Combining (MEGC) to decrease the effect of CW interference. Theoretical analysis and numerical results show that the anti-CW interference performance of MC-CDMA system can be improved used the MEGC approach.     

A Research on the Way of EMBET in the Tracking Systems'' Accuracy-analysis During Satellite Launch

In the past, the criterion for calibration has almost invariably been the stellar oriented ballistic camera,the method is a point to point comparison on the identical coordinate system. Deficiencies is follows: The request of weather is severe(cloudless night); The period is often long; the measure equipment of high precision can't be calibrated. While EMBET methods is used in calibration, it does not need criterion and it demands only that the measure elements is larger than 3,and the trajectory and many system errors of the measure elements can be simultaneously calculated with the measure data sequences. The error models of related equipments' measure elements and the EMBET of typical equipment group are given. The EMBET method is successfully used in Accuracy-analysis of Satellite Launch.     

观赏羽衣甘蓝的离体繁殖

以花蕾为外植体，离体繁殖羽衣甘蓝８个杂各一代材料。培养基为（ｍｇ／Ｌ）：ＭＳ＋ＢＡ１－２＋ＮＡＡ０．１－０．２＋ＩＡＡ０．５＋（或不加）ＧＡ３０．３＋３％蔗糖。平均１８％－６７％的接咎花蕾产生不定芽；药有３０％的不定芽发育成完整植物。培养物的严重褐化和再生植物的普遍玻璃质化是影响植株成活的主要因素。培养基中加入活性炭和青霉素，并给以强光照射，可提高植株成活率。     

机床传动误差测量中的空域法分析

从空间域的角度讨论了信号处理的一种特殊方法，介绍了它的特点，建立了空域傅氏变换数学模型，并且给出了实用效果。实践证明空域分析法应用于机床传动链一类的特殊场合是有效的。     

使用迭代重加权最小二乘法求解平面度误差

提出了几何误差评定的迭代重加权最小二乘（IRLS-Iterative Reweighted Least Squares)算法。该算法采用一个迭代过程求解一系列加权最小二乘问题，并在每一步迭代中按照一定的规则对权系数进行调整，使其逐步逼近最优拉格朗日乘子。对于用CMM(坐标测量机)和其他设备得到的数据，可得到平面度误差的精确值。     

离心泵整体叶轮流道数控加工误差的仿真

对数控加工所获得的叶轮流道的加工误差进行仿真。首先对刀位轨迹线进行归一化处理,以此计算出脊棱高度曲线,再采用线性插值的方法得到曲面上采样点的加工误差。由于自由曲面加工中的刀位点比较密集,本文利用彩色云图将加工误差可视化,完善了对数控加工结果的计算机几何仿真。该算法已在自行研制的叶轮CAM系统中得到验证,并且与实际加工结果一致。     

单位线方法在沿渡河流域的应用研

单位线方法在水文计算及洪水预报中得到了广泛的应用，至今仍然是汇流计算的重要工具。以沿渡河流域为研究背景，分别采用分析法及矩法推求了该流域的时段单位线，并分别用这两种单位线模拟了该流域的同次洪水过程，模拟结果表明分析法得到的单位线更加适合该流域的洪水计算。最后，在详细分析两种方法误差来源的基础上，提出了相应的改进措施。     

含河渠的分洪区洪水演进数值模拟

在分洪区内存在河渠的情况下，根据水流在河渠外区域和河渠内运动特点的不同，对已有的分洪区二维水流数学模型进行拓展，建立了相应的数学模型。该模型计算时能考虑河渠两侧有、无堤防两种情况，通过对概化地形的计算，证明了模型的合理性。