直剪法用于糙米内摩擦角的测定与研究

利用土工合成材料综合测定仪（直剪仪）,以水分含量14.57%的糙米为样品,测定了在不同的法向压应力、不同的剪切速率下糙米的剪切应力并计算出内摩擦角。实验结果表明：糙米的剪切应力随着法向压应力（25kPa～100kPa）的增大而增大;剪切速率（1.33mm/min～2.67mm/min）较低时糙米的内摩擦角随着法向压应力的增大而减小;随着剪切速率（1.33mm/min～5.20mm/min）的增大,糙米的内摩擦角减小。     

基于EDEM的猪粪接触参数标定

为准确快速获得畜禽粪便的接触参数,该研究通过物理堆积试验与仿真方法对猪粪接触参数进行了标定。测定了不同含水率下猪粪的堆积角,建立了含水率与堆积角的回归方程;基于Hertz-Mindlin with JKR球体粘结模型,进行了离散元仿真模拟;采用筛选试验设计(Plackett-BurmanDesign,P-BD)对10个初始参数进行了筛选,发现JKR(Johnso-Kendall-Roberts)表面能、颗粒间滚动摩擦系数、颗粒间碰撞恢复系数对猪粪堆积角影响显著;并根据响应曲面试验设计(Box-BehnkenDesign,B-BD)建立了堆积角与显著性参数的二阶回归模型,得到了3个显著性参数值分别为JKR表面能0.03J/m~2、颗粒间滚动摩擦系数0.27、颗粒间碰撞恢复系数0.54;将仿真所得堆积角与物理试验值进行对比验证,相对误差为4.27%。结果表明,该研究提出的标定方法能准确模拟物理堆积试验,可为畜禽粪便接触参数的标定提供参考。     

静动荷载作用下小麦剪切特性试验研究

为研究静动载荷作用下的粮食剪切特性,利用开发的新型粮食动直剪仪,设计了孔隙率为39%、36%、33%以及竖向压力为50、100、150、200k Pa下的小麦单调直剪、往复剪切及往复后单调直剪试验,研究了小麦静动力剪切特性,并对比分析了小麦单调直剪与往复后单调直剪的强度、变形结果。研究结果表明:单调直剪试验中,同一孔隙率下,竖向压力越大,其软化现象越明显,剪胀现象越不明显,剪胀角越小,竖向压力为50、100、150、200k Pa下对应的剪胀角分别为4.5°、3.6°、2.4°、0.7°;同一竖向压力下,随着小麦孔隙率减小,其软化现象越明显,内摩擦角也越大,孔隙率为39%、36%、33%的小麦对应的内摩擦角分别为22.2°、24.4°、28.1°。剪胀角也随着小麦孔隙率减小而增大,对应的剪胀角分别为1.3°、3.6°、9.9°;往复剪切试验中,孔隙率越小,小麦往复剪切软化现象越明显,剪缩现象越不明显,最大剪缩量越小,孔隙率为39%、36%、33%的小麦对应的最大剪缩量分别为2.77、1.74、1.15 mm。往复后单调直剪与单调直剪试验结果对比表明,往复后单调直剪的小麦抗剪强度明显增大,其剪胀现象更明显,最大剪胀量也增大。试验结果可为粮仓结构安全性设计,尤其是粮仓结构动力分析提供依据。     

大豆植株分杈数自动提取算法研究

根据大豆植株分杈个数可以预估大豆的产量。为了满足现代农业预测农产品产量的需要,本文提出一种大豆植株分杈数自动提取算法,即首先将采集到的大豆植株图片进行灰度变换、滤波、阈值分割得到二值图像,再进行形态学中的闭运算操作得到大豆植株的轮廓,然后基于Zhang并行快速细化算法提取骨架,最后借助改进的角点检测算法对大豆植株的所有分杈点进行标记并自动统计分杈数,仿真结果与大豆植株实际分杈点一致。     

微喷带单孔水量分布影响因素试验研究

为了探究微喷带管径、喷孔结构、工作压力以及喷射角度对单孔水量分布影响,以常用的机械打孔的Ф28,Ф32,Ф40和Ф50这4种微喷带为研究对象,通过调节微喷带的喷射角度和工作压力,研究微喷带正常运行时单孔喷水(其他孔进行遮挡,不混入测试单孔的水流中)特性,测定了不同工作压力条件下射程、湿润面积、干燥区宽度等参数.结果表明:喷水射程随喷射角度先增大再减小,射程最大值为30°~ 40°,随工作压力的增大而增大;湿润区宽度与喷射角度、工作压力均存在正相关的关系;射程与干燥区宽度随喷射角度的变化规律相同;湿润区面积的最大值出现在喷射角度为50°时.在实际运行中,建议微喷带喷射角度为30°~50°,并应根据干燥区与射程合理布置相邻微喷带的铺设间距.     

Root architecture of sorghum genotypes differing in root angles under different water regimes

Plant root architecture offers the potential for increasing soil water accessibility, particularly under water-limited conditions. The objectives of this study were to evaluate the root architecture in two genotypes of sorghum (Sorghum bicolor (L.) Moench) differing in root angles and to assess the influence of different deficit irrigation regimes on root architecture. The response of two sorghum genotypes, ‘Early Hegari-Sart’ (EH; steep root angle) and ‘Bk7’ (shallow root angle) to four irrigation treatments was investigated in two replicated outdoor studies using large pots. The results indicated that EH possessed steeper brace and crown root angles, fewer brace roots, greater root biomass, and root length density than Bk7 at deeper soil depths (i.e., 15–30 and 30–45 cm) compared with a shallower depth (i.e., 0–15 cm). Across the soil profile, EH had greater root length density and length of roots of small diameter (<1 mm) than Bk7. Accordingly, EH showed more rapid soil-water capture than Bk7. Different levels of irrigation input greatly affected root architecture. Severe deficit irrigation (25% of full crop transpiration throughout the season) increased the angle and number of crown roots, root biomass, and root length density compared with 75 and 100% of full crop transpiration treatments. Consequently, root system architecture can be effectively manipulated through both genotypic selection and irrigation management to ensure optimal performance under different levels of soil available water.     

Evaluation of Dynamic Structural Disorders in the Upper Airways and Applied Rein Tension in Healthy Dressage Horses During Riding in Different Gaits and Head–Neck Positions

Flexion of the horse’s head and neck during dressage riding reduces the pharyngeal lumen with the risk of increased upper airway resistance and upper airway obstructions. According to the Fédération Equestre Internationale, hyperflexion is achieved through force, whereas the position low–deep–round is nonforced. The objectives of this study were to evaluate (1) applied rein tension and (2) dynamic structural disorders in the upper airways in dressage horses in different gaits and different head–neck positions (HNPs). Overground endoscopy (OGE) and rein tension were evaluated in 13 clinically healthy and high-performance Warmblood dressage horses while being ridden in a standardized program comprised of four different gaits (halt, walk, trot, and canter) and in four HNPs (unrestrained, competition frame, hyperflexion, and low–deep–round). All included horses were able to achieve the desired HNPs. The HNP low–deep–round showed significantly lower rein tension than competition frame (P < .001) and hyperflexion (P < .001). An association was found between dynamic structural disorders in the upper airway tract evaluated by OGE and head–neck flexion, but this association was not linked to the degree of flexion. The HNP hyperflexion was neither associated with greater rein tension nor severe dynamic structural disorders than the HNP competition frame. This study confirms that low–deep–round is a nonforced position, in contrast to hyperflexion. Further studies are needed to evaluate whether dynamic structural disorders are a result of flexion or if the degree of flexion has an impact.     

苜蓿秸秆压缩仿真离散元模型参数标定

为了提高苜蓿秸秆压缩过程中离散元仿真研究所用参数的准确度,该研究采用物理试验和仿真优化设计相结合的方法对离散元仿真参数进行标定。首先,以接触参数物理试验结果为仿真参数选择依据,利用Plackett-Burman试验对初始参数进行显著性筛选,方差分析结果表明,苜蓿秸秆-苜蓿秸秆静摩擦系数、苜蓿秸秆-苜蓿秸秆滚动摩擦系数、苜蓿秸秆-45钢静摩擦系数对仿真休止角影响显著。进一步以休止角的相对误差值为评价指标,对3个显著性参数进行最陡爬坡试验,优化显著性参数取值范围,并基于Box-Behnken试验建立休止角与显著性参数的二阶回归模型,以物理试验得到的38.88°休止角为目标值,对显著性参数进行寻优,得到最优组合:苜蓿秸秆-苜蓿秸秆静摩擦系数为0.45、苜蓿秸秆-苜蓿秸秆滚动摩擦系数为0.08、苜蓿秸秆-45钢的静摩擦系数为0.54。最后利用T检验得到P0.05,表明仿真休止角与物理试验值无显著性差异,验证了最优参数组合的可靠性。研究结果表明,应用上述各优化试验来标定离散元仿真参数是可行的,同时标定的参数可为苜蓿秸秆的其它仿真试验提供参考。     

水稻突变体W33高位分蘖特性利用价值研究

为探讨水稻突变体材料W33高位分蘖特性在水稻育种上的利用价值。以野生型水稻恢复系R818及其高节位分蘖突变体W33为试验材料,用盆栽试验研究R818和W33的植株、分蘖和穗部性状差异,用大田栽培控制性试验比较R818和W33分蘖、产量构成性状及子粒产量差异,测得参试材料各性状数据。结果表明,生长前期W33和R818株高、主茎叶均长无明显差异,中后期二者株高、主茎叶均长渐显显著或极显著差异;W33单株平均分蘖数是R818的7.5~8.8倍,平均有效穗数是R818的8.6倍,分蘖平均成穗率与R818相当,但单穗穗长、枝梗数和着粒数明显低于R818,而千粒重与R818无明显差异;W33和R818单株籽粒产量均随密度增大而降低,并以最低密度条件下最高,最高密度条件下最低;尽管W33单穗产量明显低于R818,但在相同栽插密度条件下,W33和R818群体产量差异不显著(F=3.7868<F_0.05,1,4);在一定密度范围内,W33能充分发挥其旺盛的分蘖力和较高的成穗率优势,以弥补单穗产量较低的缺陷,其群体产量最终达到与R818相当的水平。说明W33旺盛的分蘖力和较高的分蘖成穗率特性在水稻育种上具有一定的利用价值。