离心挤压式油棕果果核分离机的研制

传统小型油棕果榨油设备采用果肉、果核混合压榨的出油方式,为防止压破果核影响油质而降低压力,造成不完全压榨,油渣含油高。为提高出油率,选用先分离果核再压榨果肉的工艺,为此设计研制了一种基于离心挤压的油棕果果核分离机,可将高温杀酵后从果穗脱离的果实进行高速离心捣碎并再次加热,降低物料粘度,使果肉更容易从分离栅栏挤出,达到果核分离目的。     

Grass silage for biorefinery—A meta‐analysis of silage factors affecting liquid–solid separation

This meta‐analysis based on 19 studies from Finland comprising 43 grass silages was undertaken to evaluate the effect of silage quality on liquid yield, liquid composition and retained compounds in liquid using four different liquid–solid separation methods. Silages were classified according to species (grass, clover or a mixture of them), additive treatment (no, biological or formic acid‐based additive) and harvest (primary growth or regrowth). A mixed model regression analysis with random study effect was used to evaluate the impact of silage characteristics on biorefinery efficiency. There was a large variation in silage quality in the data set. Silage dry‐matter concentration was the characteristic most highly correlated with liquid yield for all separation methods, and when used as an independent variable in the model, it resulted in the best predictions. The liquid–solid separation methods presented a great variation in the liquid yield, ranging from 0.26 to 0.56 when silage dry‐matter concentration was standardized to 250 g/kg. There was no effect of additive treatment and harvest in the estimation of the biorefinery potential, but species was a significant variable in predicting liquid yield for the laboratory‐scale presses with higher liquid yield for mixed grass and legume. The high correlation between silage quality and liquid yield and liquid composition provides potential to predict the biorefinery potential based on equations developed for each separation method. This information can be used to modify the silage production systems so that they best meet the requirements of a green biorefinery process.     

半解析法求解水柱分离与断流弥合水锤问题及机理分析

为了应对长距离输水工程的水锤防护问题,分析了空气阀作用于波状管线有压输水系统发生水力过渡时的瞬态响应过程,提出了空穴增长和溃灭时间、管线最大含气率、最大压力峰值等参数的半解析公式,并由此探讨和研究影响空气阀水锤防护效果的关键因素。半解析解表明,位于空气阀下游的管段相对长度和管线高点的相对高程对系统的断流弥合水锤起了主导作用。将半解析解与特征线法数值解进行了对比,发现两者随主变量的变化趋势一致;分析了半解析解与数值解产生偏差的原因与半解析公式推导过程中几个假设的关系。结果证明,该文提出的半解析公式能够反映空气阀作为水锤防护装置时,主导断流弥合水锤压力峰值的关键因素。该研究可为水锤防护的相关研究提供参考。     

等高植物篱/大豆间作根系相互作用对生长和氮素吸收利用的影响

通过15N标记土壤的箱栽试验,探讨了地下部分隔作用对植物篱/大豆间作生长和氮素吸收利用的影响。结果表明,香根草/大豆间作系统中大豆吸N量,无隔和网隔处理比板隔处理分别增加20.1%和0.6%,香根草吸N量分别高出7.4%和24.2%;而紫穗槐/大豆间作系统中大豆吸N量,无隔和网隔处理比板隔处理分别降低28.3%和15.9%,紫穗槐吸N量依次降低14.3%和24.3%。香根草/大豆间作系统中,大豆植株15N丰度网隔处理低于无隔处理,而香根草15N丰度则表现为根系无隔时较高;紫穗槐/大豆间作系统中紫穗槐和大豆的15N丰度都表现为根系无隔时较低。在培栽条件下,间作抑制了大豆生长,影响到大豆N素的吸收利用;与大豆根系间相互作用抑制了紫穗槐生长,但一定程度上改善了香根草生长,推测根系分布在养分吸收利用中占重要地位。     

The effects of maltodextrin/starch in soy protein isolate–wheat gluten on the thermal stability of high-moisture extrudates

This study aimed to investigate the interaction between maltodextrin/starch of different molecular weight distributions and soy protein isolate (SPI)–wheat gluten (WG) matrix during high-moisture extrusion. Two maltodextrins (dextrose equivalent (DE): 10 and 20) and wheat starch were extruded with SPI–WG blend in a system of 65, 70, and 75% moisture to investigate their effects on texture and thermal stability. Incorporating 5% maltodextrin (DE10) in the SPI–WG matrix improved the fiber structure and thermal stability. When wheat starch was thoroughly gelatinized during subsequent sterilization, the fiber structure and thermal stability were also improved. It was found that the plasticization caused by small-molecular weight saccharides and enhanced phase separation caused by large-molecular weight saccharides changed the melting temperature of blends and significantly improved the texture and thermal stability of extrudates.     

Simultaneous selection for seed and forage production in cocksfoot (Dactylis glomerata): application of drought tolerance and susceptibility indices

An experiment was conducted to estimate drought tolerance of some cocksfoot genotypes based on seed and forage yield and related indices (including tolerance index, mean productivity, geometric mean productivity, reduction percentage index, stress tolerance index and stress susceptibility index) and to identify relationships between measured traits. Twenty‐five genotypes were evaluated in the field under control and drought‐stress environments over 2 years. The results revealed a high variation for seed yield and forage yield and the measured indices under both moisture conditions. No correlation was observed between seed yield and forage yield under the control treatment, but this correlation was positively significant under the water‐stress treatment. Drought‐tolerant and susceptible genotypes were identified based on seed and forage yield performance. Genotypes 2, 4 and 7 had high seed yield, while genotypes 7 and 10 had high forage yield under both stressed and non‐stressed conditions and were identified as the most tolerant genotypes in each category. The results also revealed that genotypes 1, 2, 4, 6, 7, 8 and 24 had relatively high seed and forage yield in both control and drought‐stressed conditions. These genotypes can be used for further studies to improve both seed and forage yields concurrently.     

农田残膜机械回收膜土分离模型的建立与仿真试验

为明确农田残膜机械回收过程中膜土分离机理，基于土壤接触理论及土壤黏附力学，建立残膜与土壤颗粒的接触模型和残膜与土壤颗粒间黏结合力变化的数学模型。利用EDEM软件，进行0.01、0.02、0.03 mm厚度残膜与黏附土壤剥离剪切仿真试验。拟合结果表明，0.01、0.02、0.03 mm残膜厚度下，膜土分离剪切力与剥离剪切位移均呈三次方关系，决定系数分别为0.805 9、0.872 2、0.878 4；对台架验证试验结果进行拟合，决定系数分别0.793 2、0.854 8、0.869 0，相对误差最大值为13.77%。     

一种新型气液分离器的设计

在食品发酵行业中压缩空气脱水不足会造成发酵染菌,同时发酵罐的发酵液随尾气排出罐体时,会造成生产产量降低及造成空气二次污染,加大发酵染菌机率,导致停产。针对行业需求,本文介绍了一种新型气液分离器,该设备与同类产品相比有较高的分离效率。      

辐照协同甲酸分离油茶壳中纤维素、木质素和木糖的工艺研究

为了提高油菜壳木质纤维素分离效率,本试验以油茶壳为原料,研究不同辐照剂量(0、200、400、600、800 kGy)处理后其粉碎能耗、粒度分布和化学组分的变化,同时开展辐照协同甲酸分离油茶壳木质纤维素的工艺研究。结果表明,辐照处理后油茶壳粉碎能耗降低,粉碎后细颗粒样品所占比例增加,经400 kGy剂量辐照处理的油茶壳粉碎能耗比对照节约43.59%,800 kGy剂量辐照处理的油茶壳粉碎后粒径<0.075 mm的颗粒占比达到41.38%。辐照处理后油茶壳木质纤维素发生降解,水溶性组分、水溶性单糖、聚糖含量均增加。辐照协同甲酸分离油茶壳纤维素、木质素和木糖的最佳工艺为:辐照剂量400 kGy,反应温度100℃,反应时间3 h,在此条件下分离获得的油茶壳纤维素、木质素、木糖的提取率分别为89.94%、47.74%和96.37%,纤维素和木质素纯度分别为45.05%和91.92%。本研究结果对油茶壳木质纤维素全组分的高效分离和应用具有重要意义。