甘蓝型油菜耐低温生长生理生化响应机制

为提高甘蓝型油菜耐寒育种过程中的筛选效率，研究甘蓝型油菜耐低温机理，以8个不同抗寒性的甘蓝型油菜为材料，对低温条件下各材料的生物量、叶绿素、脯氨酸和相对电导率进行测定，发现在室外平均气温2.75℃时，抗性材料的生物量、叶绿素和脯氨酸的累积量都显著高于敏感材料，相对电导率没有显著差异；当平均气温7.52℃回升至12.39℃，抗性材料和敏感材料生物量的累积量无显著差异；在恒定低温10℃/4℃处理下抗性材料和敏感材料在处理前3周生物量均持续累积，但从第4周开始敏感材料新叶出现白斑，生物量减少，抗性材料老叶出现白斑，生物量维持不变。结果表明，耐低温材料在低温条件下叶绿素含量受到的影响较小，脯氨酸的积累量持续上升，具有较强的快速适应能力，在低温下具有显著的持续生长优势。     

Simulation of future dissolved oxygen distribution in pond culture based on sliding window-temporal convolutional network and trend surface analysis

Dissolved oxygen (DO) is a key ecological factor to measure the quality of water in the aquaculture. As the pond water body is affected by the breeding environment, the spatial distribution of DO shows a certain law in the entire pond. Therefore, to simulate the distribution of DO in aquaculture waters and grasp the temporal and spatial variation of DO is the key to achieving precise regulation of DO. For this purpose, this paper proposed a method for simulating the temporal and spatial distribution of DO in pond culture based on a sliding window-temporal convolutional network together with trend surface analysis (SW-TCN-TSA). This paper first utilized SW to construct DO data sets with different prediction durations, and then used the improved TCN model to realize one-dimensional time series prediction for DO at single monitoring point. Based on the prediction results of DO, a TSA method was performed on the predicted values of DO at the extreme moments of all discrete monitoring points, so as to realize the simulation of the temporal and spatial distribution of DO in the pond. Experimental results show that the SW-TCN model has better prediction performance for one-dimensional time series prediction of DO. Compared with traditional deep networks, such as CNN, GRU, LSTM, CNN-GRU and CNN-LSTM, the values of evaluation indicators (MSE, MAE and RMSE) have been greatly improved. In the process of trend surface fitting, all fitting R² of DO at different water depths are higher than 0.9, indicating that the TSA can accurately reflect the temporal and spatial distribution of DO. This method can provide a basis for the prediction and early warning of DO in the three-dimensional space of the pond and has high practicability in aquaculture.     

Genetic analysis and QTL mapping of growth period traits and plant height traits in soybean recombinant inbred lines from Dongnong 47 × PI 317334-B

High and stable yield is the main goal of soybean genetic improvement. In this study, association analysis was used to detect the quantitative trait loci (QTL) for the plant height, and soybean growth period using 182 SSR markers in the RIL population of 136 F_4:8 lines, which developed from a cross between photoperiod-insensitive cultivar ‘Dongnong 47’ and photoperiod-sensitive variety PI317334–B. The results showed that 33 QTLs related to soybean growth period and plant height traits were detected by compound interval mapping, and were located on 12 linkage groups including N, C1, C2, J, D1a, B2, E, G, A2, O, L, I, with the contribution rate of 7.85–33.84%. These QTL loci and linkage markers related to soybean photoperiod sensitivity, would be helpful to identify key genes that control soybean photoperiod sensitivity, and provide an important basis for the breeding of new photoperiod-insensitive soybean varieties based on molecular design breeding.     

miR-106b-5p靶向KLF4调控山羊肌内前体脂肪细胞分化

旨在明确miR-106b-5p对山羊肌内前体脂肪细胞分化的影响，并确定这种作用是通过靶向KLF4来实现的。本研究利用实时荧光定量PCR （quantitative real-time PCR，qRT-PCR）技术检测miR-106b-5p在山羊肌内前体脂肪细胞分化过程中的表达模式，通过脂质体转染技术将miR-106b-5p mimic和miR-106b-5p inhibitor转入体外培养的山羊肌内前体脂肪细胞，油红O染色法从形态学验证miR-106b-5p对脂肪细胞中脂滴积聚的影响，qRT-PCR检测预测的靶标基因KLF4和脂肪分化标志基因的表达情况，利用双荧光素酶报告系统鉴定miR-106b-5p与KLF4的靶标关系。qRT-PCR结果显示，miR-106b-5p在山羊肌内前体脂肪细胞诱导分化第3天时表达量最高。在山羊肌内脂肪细胞中干扰miR-106b-5p后油红O染色显示脂滴聚积减少，过表达miR-106b-5p后脂滴聚积增加。在山羊肌内前体脂肪细胞中转染miR-106b-5p inhibitor后PPARγ表达量显著降低（P<0.05），而KLF4表达量极显著升高（P<0.01）；转染miR-106b-5p mimic后LPL和PPARγ表达量极显著升高（P<0.01）。荧光素酶活性试验结果显示，过表达miR-106b-5p可显著抑制KLF4荧光活性。miR-106b-5p通过靶向并负调节KLF4的表达促进山羊肌内脂肪细胞分化。     

Ss-Bi1 encodes a putative BAX inhibitor-1 protein that is required for full virulence of Sclerotinia sclerotiorum

Sclerotinia sclerotiorum is a destructive necrotrophic plant pathogen with global distribution. Although S. sclerotiorum has been studied extensively, substantial research on aspects of the pathogen's ability to cause disease is still needed. Bax inhibitor-1 protein functions as a suppressor of programmed cell death and is involved in the response to biotic and abiotic stress in animals, plants and yeast. In this study, we functionally characterized a putative Bax inhibitor-1 protein, Ss-Bi1, from S. sclerotiorum. Ss-Bi1 is predicted to contain a BAX inhibitor-1-like super family domain and shows significant homology with many BAX inhibitor-1 proteins. High expression levels of Ss-Bi1 were observed in hyphae under various stresses. Targeted silencing of Ss-Bi1 resulted in reduced virulence in host plants. Ss-Bi1 gene-silenced strains were more sensitive to heat stress and ER stress than the wild-type strain. The results suggest that Ss-Bi1 encodes a putative BAX inhibitor-1 protein that is required for full virulence of S. sclerotiorum.     

猪链球菌蛋白表面展示系统的构建及展示蛋白的初步观察

为构建猪链球菌(Streptococcus suis)蛋白表面展示系统,本研究通过序列分析,确定猪链球菌的LPxTG蛋白及其信号肽(SP)和胞壁锚定基序(CWA),通过PCR扩增Peno-SP、GFP、CWA的DNA片段并融合,构建强启动子Peno控制表达编码SP-GFP-CWA融合蛋白的DNA片段,将该重组DNA片段连接pSET2载体,获得蛋白表面展示质粒,转化猪链球菌,构建得到以GFP为报告蛋白的猪链球菌蛋白表面展示系统。结果显示,利用猪链球菌的10个LPxTG蛋白及其SP和CWA序列,构建了10个含有Peno-SP-GFP-CWA融合片段的重组pSET2表面蛋白展示质粒pSsPSD1至pSsPSD10,分别转化猪链球菌05ZYH33,PCR鉴定显示其中7个转化猪链球菌。采用western blot初步检测其展示蛋白,结果显示,7个转化阳性菌株均能有效表达GFP蛋白,以成熟GFP条带为指标,均表现出了一定的外源GFP表面展示水平,分别命名为SsPSD1、SsPSD2、SsPSD4、SsPSD7-SsPSD10,其中SsPSD1、SsPSD4、SsPSD8和SsPSD9表面展示水平相对较好,在猪链球菌表面展示外源蛋白方面具有很好的潜力。本研究首次尝试建立猪链球菌蛋白表面展示系统,为猪链球菌表面递呈外源蛋白或抗原提供了新的策略。     

基于响应面法和NSGA-II算法的麦弗逊悬架优化

应用响应面法和经过改进的非支配排序遗传算法(NSGA-II)进行悬架结构参数优化.在ADAMS/Insight软件中进行设计参数的灵敏度分析，针对灵敏度较大的设计参数，建立车轮定位参数在车轮跳动过程中最大变化量的2阶响应面近似数学模型对该模型进行稳定性分析，并且应用加入精英保持策略和去除重复个体算法的NSGA-II优化算法对多目标响应面模型进行优化求解.优化结果表明该方法具有较高的精确性与有效性.     

井渠灌区地下地表水耦合模拟及用水配置研究

针对宁夏惠农区渠井用水比例失调,导致地下水越过适宜埋深造成次生盐渍化的问题。选择惠农区李岗村为试验区,在概化试验区水文地质条件,建立了水文地质概念模型,采用双重节点方式对地表水地下水模型进行耦合,在每个时间段对两者进行联立同时求解,通过HydroGeoSphere进行模型的计算求解,率定和验证模型中的水文地质参数。并通过建立的模拟模型,适时调整用水比例,得到在生态安全埋深下,渠井用水最优比例。     

Bayesian estimation of diagnostic accuracy of a new bead-based antibody detection test to reveal Toxoplasma gondii infections in pig populations

The success of a Toxoplasma gondii surveillance program in European pig production systems depends partly on the quality of the test to detect infection in the population. The test accuracy of a recently developed serological bead-based assay (BBA) was investigated earlier using sera from experimentally infected animals. In this study, the accuracy of the BBA was determined by the use of sera from animals from two field subpopulations. As no T. gondii infection information of these animals was available, test accuracy was determined through a Bayesian approach allowing for conditional dependency between BBA and an ELISA test. The priors for prevalence were based on available information from literature, whereas for specificity vague non-informative priors were used. Priors for sensitivity were based either on available information or specified as non-informative. Posterior estimates for BBA sensitivity and specificity were (mode) 0.855 (Bayesian 95% credibility interval (bCI) 0.702–0.960) and 0.913 (bCI 0.893–0.931), respectively. Comparing the results of BBA and ELISA, sensitivity was higher for the BBA while specificity was higher for ELISA. Alternative priors for the sensitivity affected posterior estimates for sensitivity of both BBA and ELISA, but not for specificity. Because the difference in prevalence between the two subpopulations is small, and the number of infected animals is small as well, the precision of the posterior estimates for sensitivity may be less accurate in comparison to the estimates for specificity. The estimated value for specificity of BBA is at least optimally defined for testing pigs from conventional and organic Dutch farms.     

凸齿镇压器作业过程的运动学与动力学分析

[目的]基于理论推导建立凸齿镇压器作业过程中的运动学和动力学模型。[方法]根据运动学中刚体做平面运动的瞬心定理和牵连运动为平动时质点的加速度合成定理,建立凸齿镇压器在不同工作阶段的运动参数模型;根据动力学中的动量定理、动能定理和冲量定理,建立凸齿镇压器工作状态中所需牵引力、凸齿与地面作用瞬间产生的冲击力和冲击能的参数模型。[结果]凸齿镇压器作业过程中所需的牵引力随着凸齿镇压器的自身质量和滚动阻力系数的增加而增大,而凸齿镇压器转动惯量的增加会降低凸齿镇压器所需牵引力;冲击过程中,凸齿镇压器的牵引速度越大、质量和转动惯量越大、冲击时间越短,则冲击力越大;凸齿镇压器冲击土壤时的冲击能随着凸齿的转动惯量、质量和质心竖直向下移动距离的提高而增加,而随土壤的弹性系数与土壤的塑性变形量的增加而减小。[结论]建立了凸齿镇压器在不同工作状态下运动学及动力学模型,分析并揭示了凸齿镇压器结构参数与运动参数间的相互联系,探索了凸齿镇压器冲击土壤的特征规律,为设计和优化其结构参数和运动参数提供了理论依据。