我国甘蔗产业化现状浅析

从甘蔗自然属性、种植地域分布、品种、种植模式等农艺角度,以及甘蔗机械收获方式和甘蔗收获机械等农机角度,对我国甘蔗产业现状进行全面分析,指出甘蔗产业在我国糖业发展的重要地位,且甘蔗收获机械化是甘蔗机械化生产中最薄弱环节。针对我国目前甘蔗收获现状,对制约甘蔗机械收获的因素进行细致分析,并从农艺因素、农机因素、加工因素、环境因素和社会因素等5个方面进行归类提炼,对甘蔗收获机械化进行了展望。     

果园苗木捆扎机热合板的优化改进

热合板联动机构作为苗木捆扎机关键部件,在苗木捆扎过程中发挥着重要作用。为此,在对热合板联动机构工作过程进行理论分析研究的基础上,对热合板卡带问题的原因作了具体的阐述,并针对苗木自身的特征参数,在不影响其运动功能的基础上,对热合板的结构参数及附属拨块进行了优化改进,很好地解决了热合板运动不连贯,影响整机工作效率的问题。     

覆盖方式对旱地小麦花后旗叶抗氧化生理及粒重形成的影响

于2017—2018年和2018—2019年,在西北中部旱作雨养农业区以冬小麦‘康庄974’为试验材料,设秸秆带状覆盖(SM)、地膜覆盖(PM)和无覆盖对照(CK)共3个栽培处理,分析不同覆盖方式对小麦灌浆期土壤水分和温度及抗氧化能力的影响,探讨花后干物质积累量和粒重形成的关系。结果表明,随生育期推进,花后旗叶相对含水量(RWC)逐渐降低,丙二醛(MDA)含量逐渐升高,且PM较SM降、升幅度明显。与CK相比,覆盖显著提高花后旗叶抗氧化酶活性,增加渗透调节物质含量;开花时间越长,SM抗氧化酶活性升高的幅度越大,而PM主要提高花后7 d旗叶抗氧化能力。SM和PM的粒重分别较CK增加14.3%和19.1%(P<0.05)。相关分析表明,土壤水分(SW)是影响旗叶生理活性的关键因子,提高SW,有利于增加RWC(r=0.84^**),从而提高旗叶抗氧化能力,其中RWC和抗坏血酸酶(ASA)活性呈极显著正相关关系(r=0.82^**);ASA活性和脯氨酸(Pro)含量呈极显著正相关关系(r=0.94^**),和MDA含量呈极显著负相...     

氮肥深施对旱作覆膜农田土壤养分含量及春玉米产量的影响

以春玉米为供试作物,于2021—2022年在甘肃省定西市进行不同深度施肥田间试验,以双垄沟覆膜种植为基础,设置3个氮肥施用深度：5 cm(D5)、15 cm(D15)和25 cm(D25),以不施氮(N0)处理为对照,共4个处理,分析不同氮肥施用深度对农田土壤养分含量、干物质积累、水分利用及玉米产量的影响,为优化施肥模式和进一步提升其节水增产效能提供理论依据。结果表明,随施肥深度的增加,农田0～40 cm土层土壤养分含量逐渐增大,D25处理较D15和D5处理的土壤有机碳、全氮、速效磷和速效钾含量分别平均提高8.67%、2.23%、22.11%和15.18%;氮肥深施可提高生育后期养分供给能力,玉米干物质积累量显著提高,D25处理播后105 d～收获期干物质积累量分别较D15和D5提高6.53%和25.30%;2个试验年份农田耗水量和水分利用效率均随着施肥深度的增加逐渐增大,D25处理分别较D15和D5平均提高10.09%和10.08%;D25处理玉米生物产量和经济产量较D5处理分别平均提高27.20%和34.93%。在西北旱作区,氮肥25 cm深施模式能为玉米提供更好的养分供给,是提高...     

Detection of Ecballium elaterium in hedgerow olive orchards using a low-cost uncrewed aerial vehicle and open-source algorithms

BACKGROUND

Ecballium elaterium (common name: squirting cucumber) is an emerging weed problem in hedgerow or superintensive olive groves under no tillage. It colonizes the inter-row area infesting the natural or sown cover crops, and is considered a hard-to-control weed. Research in other woody crops has shown E. elaterium has a patchy distribution, which makes this weed susceptible to design a site-specific control strategy only addressed to E. elaterium patches. Therefore, the aim of this work was to develop a methodology based on the analysis of imagery acquired with an uncrewed aerial vehicle (UAV) to detect and map E. elaterium infestations in hedgerow olive orchards.

RESULTS

The study was conducted in two superintensive olive orchards, and the images were taken using a UAV equipped with an RGB sensor. Flights were conducted on two dates: in May, when there were various weeds infesting the orchard, and in September, when E. elaterium was the only infesting weed. UAV-orthomosaics in the first scenario were classified using random forest models, and the orthomosaics from September with E. elaterium as the only weed, were analyzed using an unsupervised algorithm. In both cases, the overall accuracies were over 0.85, and the producer's accuracies for E. elaterium ranged between 0.74 and 1.00.

CONCLUSION

These results allow the design of a site-specific and efficient herbicide control protocol which would represent a step forward in sustainable weed management. The development of these algorithms in free and open-source software fosters their application in small and medium farms. © 2022 The Authors. Pest Management Science published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.     

柔性坐标测量机参数辨识方法

设计了一种六自由度关节式柔性坐标测量机,并对该测量机测量方程中的参数进行了辨识,提出了一种快速简易的单点锥窝标定方法。该方法基于单点锥窝提供的空间单点基准,利用非线性最小二乘中的高斯-牛顿法,求解测量机测量方程的参数值。实验结果表明,该方法能够有效提高测量机的整体精度,且操作简单、计算效率高。     

杂交水稻制种提高结实率的研究

杂交水稻制种不同于水稻栽培、其结实由柱头外露结实和非柱头外露结实两部分构成；空壳中90％以上是由于没有授粉受精造成的：90％以上的受精拉都能正常发育结实。柱头外露率和受精率与结实率呈显著正相关。后期施肥、父本大龄秧和机械授粉能有效地提高柱头外露率、花遇优度和结实率及制种产量。     

Operational Deflection Shape Analysis of Large Scale Electromechanical System

Operational Deflection Shapes of large scale electromechanical system can be ex-tracted directly from multipoints response of the operating system by using of the modal shape analy-sis method. Thev can be used for engineers evaluating the practical dynamic beavior of the largescale elecltromechanical system,checking the existence of local reso,iance of the Stibsystem. and in-dentifying the wcakened positions of the rigidity of structure, In this paper the method of measuringand extracting the operational deflection shal1e of the electromecha nical system is given and theavailability of operational deflection shape is proved by analyzing the actual vibration of a large ex-haust fan system as an example.     

A NEW METHOD BY USING MASS AND ACCELERATION PARAMETERS FOR BALANCING INERTIAL FORCE OF MECHANISM

This paper presents a new method by using mass and acceleration parameters for balancing inertial force of mechanism. Compared with other balance methods, this one is simple, clear and superior in regularity when the balancing equation of complex mechanism is established, and its solving procedure is also easy. The new methcd is convenient to learn and use as well as convenient to program.