海鲜菇菌糠发酵饲料对山羊屠宰性能及肉品质的影响

本试验旨在研究不同添加比例发酵海鲜菇菌糠对简阳大耳黄羊屠宰性能、羊肉氨基酸、脂肪酸含量等品质的影响。采用单因子试验设计,选取简阳大耳黄羊48只,随机分为4组,每组12只羊。分别在基础日粮中添加0（C组,对照组）、20%（L组）、30%（M组）、40%（H组）发酵海鲜菇菌糠。预试期10 d,正试期120 d。结果表明：1）L组宰前活重和眼肌面积显著高于H组（P<0.05）,肺脏、肾脏、瘤胃、小肠、大肠重量以及瘤胃占宰前活重比例显著高于其余3组（P<0.05）。且随发酵菌糠添加量的增加,眼肌面积、肺脏、肾脏、瘤胃、小肠以及大肠重量呈二次变化（P<0.05）。2）各组间背最长肌pH无显著差异（P>0.05）;L组24和48 h滴水损失显著低于其余3组（P<0.05）,且均随添加水平的提高呈二次变化（P<0.05）,熟肉率显著高于H组（P<0.05）,剪切力显著低于H组（P<0.05）。3）L组背最长肌中必需氨基酸总量显著高于C组（P<0.05）,天冬氨酸、苏氨酸、亮氨酸、赖氨酸、精氨酸含量显著高于C和H组（P<0.05）,丙氨酸、缬氨酸、异亮氨酸含量显著高于其余各组（P<0.05）,脯氨酸、甘氨酸含量显著高于C和M组（P<0.05）,其中,缬氨酸、异亮氨酸、赖氨酸和天冬氨酸含量随发酵菌糠添加量的增加呈二次变化（P<0.05）。4）各组间脂肪酸含量无显著差异（P>0.05）。其中,硬脂酸（C18：0）和α-亚麻酸（C18：3n3）含量随发酵菌糠添加水平的增加分别呈二次变化和线性升高（P<0.05）,H组C18：3n3含量较C组提高了16.48%,试验组多不饱和脂肪酸（PUFA）和n-3 PUFA含量较C组有不同程度的提高,n-6/n-3较C组分别下降了0.64%、11.73%和12.34%。综上所述,日粮中发酵海鲜菇菌糠添加水平为20%时对提高山羊内脏器官发育以及改善肉品质方面具有较好的效果。     

土栖白蚁防治施药技术研究

通过常规施药、掩体施药、早晚施药和分群孔内施药对比试验,经统计分析：掩体施药和早晚施药方法,防治土栖白蚁效果最佳,白蚁巢穴死亡率分别达到82．43％、86.97％。     

芽孢杆菌产纤维素酶的研究

对芽孢杆菌 (Bacillussp.ZU 0 4 )产纤维素酶的工艺参数进行了优化 ,研究结果表明 :木糖渣和豆饼粉分别是该菌合成纤维素酶的适宜碳源和氮源 ,NaCl和KH2 PO4对纤维素酶的合成具有重要作用 ,其适宜质量用量分别为 0 .5%～ 1.0 %及 0 .1% ,麸皮的添加可明显提高发酵液中的酶活力 ;3L发酵罐中的适宜发酵条件为 :搅拌速度 30 0r/min ,通气量 0 .3L/(L·min) ,培养温度 37℃ ,中性和碱性纤维素酶活力分别达到了2 57.6和 12 5.6U/mL ,显示了良好的工业应用前景。     

糠醛渣活性炭的制备和性能研究

以糠醛渣为原料，成功地制备出脱硫活性炭，并详细考察了制备过程中影响炭性能的诸因素，该炭表面基团丰富，中孔发达，特别是经ＣＯ２改质后，脱硫性能显著提高。     

毛竹笋,材加工剩余物的饲用价值

对毛竹笋、材加工剩余物作为反刍动物饲料的营养价值进行研究表明，竹笋加工剩余物营养价值较高，可直接或经适当处理后用作饲料，竹材加工剩余物因蛋白质含量低，木质素含量高，直接作为饲料的营养价值不及作物秸秆。由于竹材加工剩余物中含有３／４的碳水化合物，故具有作为反刍动物饲料的潜在价值。对竹材加工剩余物进行氨化处理，可明显提高粗蛋白含量，并使质地变得松软，而竹材加工过程中的高温蒸煮、切削加工和烘干处理等，可破坏其细胞壁，使碎料膨松柔软，降低了粗纤维含量，作为食物纤维素定量的ＮＤＦ、ＡＤＦ和木质素值均有不同程度下降。     

以酶解渣为碳源制备木聚糖酶的研究

以里氏木霉（Tichoderma reesei)Rut C-30为产酶菌，低聚木糖制备过程中酶解渣为碳源可透导产生含低纤维素酶活（0.106IU/mL)的木聚糖酶（154.67IU/mL)，两种酶活的比值达1459，与粗木聚糖为碳源产木聚糖酶相比，木聚糖酶活提高了1.67倍，而纤维素酶活没有增加。此酶在50℃条件下酶解粗木聚糖和酶解渣时，pH值5时酶解效率最高，酶解产物通过HPLC分析，主要是木糖。该酶系的组成主要是外切-β-木糖苷酶。     

Pyrolytic characteristics of burning residue of fire-retardant wood

In order to investigate the pyrolytic characteristics of the burning residue of fire-retardant wood, a multifunctional fire-resistance test oven aimed at simulating the course of a fire was used to burn fire-retardant wood and untreated wood. Samples at different distances from the combustion surface were obtained and a thermogravimetric analysis (TG) was applied to test the prrolytic process of the burning residue in an atmosphere of nitrogen. The results showed that: 1) there was little difference between fire-retardant wood and its residue in the initial temperature of thermal degradation. The initial temperature of thermal degradation of the combustion layer in untreated wood was higher than that in the no burning wood sample; 2) the temperature of the flame retardant in fire-retardant wood was 200°C in the differential thermogravimetry (DTG). The peak belonging to the flame retardant tended to dissipate during the time of burning; 3) for the burning residue of fire-retardant wood, the peak belonging to hemicellulose near 230°C in the DTG disappeared and there was a gentle shoulder from 210 to 240°C; 4) the temperature of the main peaks of the fire-retardant wood and its burning residue in DTG was 100°C lower than that of the untreated wood and its burning residue. The rate of weight loss also decreased sharply; 5) the residual weight of fire-retardant wood at 600°C clearly increased compared with that of untreated wood. Residual weight of the burning residue increased markedly as the heating temperature increased when burning; 6) there was a considerable difference with respect to the thermal degradation temperature of the no burning sample and the burning residue between fire-retardant wood and untreated wood. __________ Translated from Journal of Beijing Forestry University, 2006, 28(3): 133–138 [译自: 北京林业大学学报]     

Energy and carbon dioxide (CO2) balance of logging residues as alternative energy resources: system analysis based on the method of a life cycle inventory (LCI) analysis

Using the method of a life cycle inventory (LCI) analysis, the energy balance and the carbon dioxide (CO₂) emission of logging residues from Japanese conventional forestry as alternative energy resources were analyzed over the entire life cycle of the residues. The fuel consumption for forestry machines was measured in field experiments for harvesting and transporting logging residues at forestry operating sites in Japan. In addition, a total audit of energy consumption was undertaken. It involved an assessment of materials, construction, and the repair and maintenance of forestry machines as well as the costs associated with an energy-conversion plant. As a result, the ratio of energy output to input was calculated to be 5.69, indicating that the system examined in this study could be feasible as an energy production system. The CO₂ emission per MWh_e (e: electricity) of the biomass-fired power generation plant was calculated to be 61.8kgCO₂/MWh_e, while that of coal-fired power generation plants in Japan is 960kgCO₂/MWh_e. Therefore, the reduction in the amount of CO₂ emission that would result from replacing coal with biomass for power generation by as much as 3.0 million dry-t/year of logging residues in Japan was estimated to be 1.66 million tCO₂/year, corresponding to 0.142% of the national CO₂ emission. This study provides evidence that Japan could reduce its domestic CO₂ emission by using logging residues as alternative energy resources.     

冬枣药害的预防和补救措施研究

介绍了冬枣药害发生的主要原因,预防和补救措施,以期帮助枣农科学合理用药,促进冬枣的丰产和无公害栽培。     

Liquefaction and product identification of main chemical compositions of wood in phenol

To clarify liquefaction ratios and their construction variations of the main chemical compositions of wood in phenol using phosphoric acid as a catalyst, the chemical ingredients of wood such as holocellulose, cellulose and lignin, were measured and extracted according to GB methods. With Fourier transform infrared （FTIR）, the product identification of reactant before and after liquefaction in phenol was investigated. The molecular weights and their distributions of the liquefaction results （acetone soluble parts） were studied by gel permeation chromatography （GPC）. Results show that the molecular weights and their distributions of poplar and Chinese fir are almost the same. In poplar, the distribution of cellulose is the largest, and that ofholocellulose the smallest after liquefaction. For Chinese fir, the distribution of holocellulose is the largest, and that of cellulose the smallest. After liquefaction of poplar cellulose, the change bands of FTIR spectrum observed below 1 600 cm^-1, can be attributed to new substitute groups. The same is true for poplar lignin. For Chinese fir, the spectra of liquefaction results of all chemical compositions differ from that of wood meal. This reveals the more activity groups were produced because of the reactions between Chinese fir and phenol. The research shows that the liquefaction ratios of poplar decrease in the following order： holocellulose 〉 lignin 〉 cellulose, and those of Chinese fir in the order： lignin 〉 cellulose 〉 holocellulose.