土壤铅和镉溶出伏安法检测中影响因素及其削弱方法研究进展

溶出伏安法具有分析速度快、成本低、灵敏度高等优点被广泛应用于检测土壤重金属含量，但在检测土壤重金属时，溶出伏安检测精度会受到多方面因素的影响。该文在介绍溶出伏安法工作原理的基础上，从伏安参数、试验条件和土壤物质成分三方面阐述溶出伏安法检测土壤Pb2+和Cd2+为的影响因素，解析各因素的影响机理，归纳影响削弱方法的研究进展。研究结论为：方波脉冲阳极溶出伏安法最常用于检测土壤Pb2+和Cd2+，伏安参数包括脉冲幅值、电压增量和脉冲频率，试验条件包括沉积时间、沉积电压和支持电解质种类及其pH值，土壤成分主要干扰因素包括非目标重金属和有机质。针对伏安参数和试验条件的影响可以设计优化试验有效削弱。针对非目标重金属和有机质的干扰影响，目前研究还没有提出有效的削弱方法。最后，展望了溶出伏安法检测土壤重金属的未来发展方向。     

土壤团聚体有机碳研究进展

土壤有机碳是衡量土壤肥力的重要指标,对于促进土壤养分循环、增加养分有效性有重要作用。土壤团聚体是土壤的重要组成部分,是组成土壤结构的最小单元,受到自然因素和人为因素的影响,其形成转化过程与土壤固碳过程息息相关,因而研究团聚体和有机碳的关系及团聚体有机碳影响因素对于土壤结构的改善和土壤质量的提升具有重要意义。本文通过对文献的总结,明晰了土壤团聚体和有机碳的关系,阐述了土壤类型、施肥方式、土地利用和矿区复垦对土壤团聚体有机碳的影响,并从生物质炭的长期定位研究和复垦矿区的土壤修复两方面对土壤团聚体有机碳的研究进行展望,研究结果可为合理的农业生产提供科学依据。     

基于准静态同轴探头模型的土壤复介电测量方法

末端开路同轴探头法测量土壤复介电值用于表征土壤含水率具有准确、快捷的优点。针对目前土壤介电同轴探头集总测量模型没有充分考虑探头的参数以及土壤体积对测量结果影响等问题，基于电磁场理论，对末端开路同轴探头建立了准静态数学模型，适用于土壤的复介电常数准确测量。通过全波软件仿真和模型计算结果对比，以无水乙醇介电实测值和理论值对比，验证模型的准确性。采用本文介电测量模型对不同含水率的黄绵土进行测量计算，复介电常数实部与实测土壤含水率二阶多项式拟合决定系数大于0.965，表明本文所提土壤介电测量方法适用于土壤复介电常数和含水率的测量。     

不同施肥处理对马铃薯农田土壤理化性状及产量的影响

为了探究不同施肥处理对马铃薯农田土壤理化性状及产量的影响,试验地采用马铃薯连作模式,设置3个施肥处理,即：单施化肥(T)、有机肥配施化肥(YTF 1/2)、全量有机肥(YTF)。结果表明：在不同施肥处理下马铃薯农田土壤的理化性质和马铃薯产量发生了变化,其中变化最为明显的土壤指标有土壤容重、孔隙度、饱和导水率、有效磷。YTF处理较T处理可分别显著(P<0.05)降低土壤容重16.8%,增加土壤孔隙度12.7%,提升饱和导水率25.3%。YTF处理可显著提升土壤有效磷含量43.0%,但各处理间土壤pH、有机碳、全氮、全磷、碱解氮、速效钾之间差异并未达到显著水平。同时,较之T处理,YTF处理亦可显著提升土壤团聚体含量。YTF和YTF 1/2处理可分别较T处理提升马铃薯产量24.6%和12.8%。因此,施用有机肥不仅可以改善土壤结构,改良土壤物理性状,亦能促产增收。     

马尾松叶表微生物多样性

为发掘对林木生长发育有利的优良微生物资源,并筛选适合叶表微生物的收集方法,以马尾松针叶为试验材料,分别用悬摇法和超声波法收集马尾松叶表微生物,用扩增子高通量测序技术、MUSCLE和Qiime软件研究马尾松叶表微生物的多样性。结果表明:扫描电镜观测结果显示,马尾松针叶表面定殖有大量微生物,包括真菌(菌丝及孢子)和细菌。扩增子高通量测序结果表明,马尾松叶表微生物物种丰富,包含细菌运算分类单位(OTUs)490个,真菌OTUs 1273个。马尾松叶表细菌以未分类的蓝细菌属(unidentified_Cyanobacteria)(36.53%)、未分类的拜叶林克氏菌属(unidentified_Beijerinckia)(28.60%)、鞘氨醇单胞菌属(Sphingomonas)(2.35%)为优势属;叶表真菌以枝孢属(Cladosporium)(2.45%)、拟盘多毛孢属(Pestalotiopsis)(0.92%)、无头孢菌属(Capnobotryella)(0.91%)为优势属。针对叶表细菌多样性的研究表明,悬摇法和超声波法均有较高的物种检出度;在叶表真菌多样性的研究中超声波法优于悬摇法,但超声波法样品间数据变异性较大,测定结果不稳定。     

墨脱县农田土壤养分现状与分布特征

本研究利用2017年墨脱县农田测土配方项目土壤调查数据,运用地统计学方法研究了墨脱县耕层土壤有机质(SOM)、碱解氮(AN)、速效磷(AP)和速效钾(AK)养分含量现状及分布特征,以期为墨脱县耕地土壤科学合理施肥提供理论依据。结果表明:当前墨脱全县土壤SOM、AN、AP和AK平均含量为89.18 g/kg、201.25 mg/kg、11.23 mg/kg、313.17 mg/kg;90%的土壤样本有机质含量处于丰富水平;83%的土壤样本碱解氮含量处于丰富、稍丰等级;84%的土壤样本速效磷含量在中等及中等以下肥力水平;46%的土壤样本速效钾含量处于中等及以下水平。从空间分布来看,土壤SOM、AK总体上呈现西高东低,AN含量由北至南呈升高趋势,土壤AP整体上没有明显的空间变化规律。墨脱县耕地土壤养分整体表现为有机质含量丰富,氮素养分较丰富,磷素养分缺乏现象普遍,钾素养分部分区域缺乏。为提升墨脱县耕地土壤肥力水平,各乡镇应该因地制宜进行土壤培肥。     

Utilizing a DUALEM‐421 and inversion modelling to map baseline soil salinity along toposequences in the Hunter Valley Wine district

In the oldest commercial wine district of Australia, the Hunter Valley, there is the threat of soil salinization because marine sediments underlie the area. To understand the risk requires information about the spatial distribution of soil properties. Electromagnetic (EM) induction instruments have been used to identify and map the spatial variation of average soil salinity to a certain depth. However, soils vary with depth dependent on soil forming factors. We collected data from a single‐frequency and multiple‐coil DUALEM‐421 along a toposequence. We inverted this data using EM4Soil software and evaluated the resultant 2‐dimensional model of true electrical conductivity (σ – mS/m) with depth against electrical conductivity of saturated soil pastes (EC_p – dS/m). Using a fitted linear regression (LR) model calibration approach and by varying the forward model (cumulative function‐CF and full solution‐FS), inversion algorithm (S1 and S2), damping factor (λ) and number of arrays, we determined a suitable electromagnetic conductivity image (EMCI), which was optimal (R² = 0.82) when using the full solution, S2, λ = 3.6 and all six coil arrays. We conducted an uncertainty analysis of the LR model used to estimate the electrical conductivity of the saturated soil‐paste extract (EC_e – dS/m). Our interpretation based on estimates of EC_e suggests the approach can identify differences in salinity, how these vary with parent material and how topography influences salt distribution. The results provide information leading to insights into how soil forming factors and agricultural practices influence salinity down a toposequence and how this can guide soil management practices.     

杏鲍菇秋葵咀嚼片配方优化与质量标准研究

为了优选杏鲍菇秋葵咀嚼片配方,以杏鲍菇粗多糖、杏鲍菇超细粉为主要原料,采用全粉末直接压片技术,选取片重差异、崩解时限、硬度及脆碎度的综合评定值为评价指标,通过响应面法确定最佳配方,并制定产品的质量指标。结果表明,杏鲍菇秋葵咀嚼片的最佳配方为杏鲍菇粗多糖38%、杏鲍菇超细粉49%和黄秋葵超细粉13%,制成的咀嚼片表面光滑、色泽均匀。综上,采用多指标综合评分法优化杏鲍菇秋葵咀嚼片配方是可行的,所得工艺配方稳定可靠,这为我国咀嚼片剂工艺创新及其产业化应用研究提供了新思路。     

菠萝蜜种子淀粉制备香草兰微胶囊的工艺研究

以菠萝蜜种子淀粉为壁材,采用饱和水溶液法制备香草兰精油微胶囊,以包埋产率为指标,采用响应面分析法对微胶囊的包埋条件进行优化探讨。结果表明:5个单因素中,影响最显著的因素为壁芯材比例、包埋温度和包埋时间。响应面优化得到香草兰精油微胶囊的最佳工艺条件为壁芯材比例为7.5∶1;包埋时间72 min;包埋温度54℃,此条件下的包埋产率为(95.46±0.2)%,包埋率为(76.35±0.6)%,载油量为(27.73±0.3)%。试验证明,此条件结果与模型预测值相吻合,此工艺条件可为菠萝蜜种子淀粉包埋香草兰精油微胶囊工艺提供理论依据。     

An investigation on the effect of heat-moisture treatment on baking quality of wheat by using response surface methodology

Effect of heat-moisture treatment on quality properties of two bread wheats (cvs. Tosunbey and Bayraktar) were investigated by using response surface methodology (RSM). Temperature and moisture conditions in the experimental design were in the range of 55–95 °C and 13–19%. Heat-moisture treated grains were milled into flour and quality properties were determined. The optimum moisture-temperature combination for the highest dry gluten, Zeleny sedimentation, Alveograph W and bread volume values were estimated as 14%-63 °C for Tosunbey and 19%-55 °C for Bayraktar samples. Alveograph W seems to be a good indicator of baking quality for wheats treated at higher temperatures. In order to describe the relationship between the dependent and independent variables (moisture, temperature), the response values were fitted by second order polynomial models. Significance analysis showed that the effect of both moisture and temperature on dry gluten content, sedimentation and falling number values for Tosunbey; falling number and damaged starch values for Bayraktar were significant (p < 0.05). The effect of temperature on Farinograph water absorption, W and P/G, bread volume and firmness values were significant for both cultivars (p < 0.05). It can be concluded that improvement in baking quality can be achieved and flours with different properties can be produced by heat-moisture treatments on wheat.