Parameter Simulation on the Control Strategy for a Parallel Hybrid Electric Vehicle by CRUISE

The purpose of a parallel hybrid electric vehicle(PHEV) is for the best energy distribution between internal-combustion engine(ICE) and electric motor though the appropriate control strategy.It can not only keep the advantage of the ultra-low emission of electric vehicles(EV),but also take advantages of the hyperbaric energy of ICE.Simulation model for PHEV is built based on CRUISE,an auxiliary control strategy is designed,and then parameter simulation study on the control strategy is performed.The simulation results show that according to the different control requirements,the vehicle performance can be improved by adjusting!the corresponding control parameters.     

人在环路模拟驾驶仿真实验系统研发

汽车是人机协同控制的复杂系统,基于NI PXIe8108实时控制器、PXI7842R数据采集卡、模拟驾驶输入设备及相关软硬件搭建了驾驶模拟仿真系统;用LabVIEW编程语言建立了车辆动力学模型;用虚拟引擎Unity3D软件开发了视景系统;并通过数据库技术使仿真过程与视景系统相结合,实现仿真过程与三维动画实时视景系统的数据交互。结果表明：通过人在环路模拟驾驶仿真实验,使仿真过程中引入了驾驶模拟操纵,实现了人在环路的人机交互式仿真,得到汽车相关性能仿真结果,为驾驶过程中人和汽车协同控制仿真和极端工况下的仿真,提供了一种安全、可靠的人车协同控制仿真环境。     

Dynamic Modeling and Simulation of 440 t/h Steam-cooled Cyclone Separator for CFB Boiler

A dynamic mathematical model of the steam-cooled cyclone separator in a 440 t/h CFB boiler has been established.Based on the mathematical model,simulation model of the cyclone separator is created with the advanced continuous simulation language(ACSL).The validity of this model has been verified by the simulation experiments and analysis.This model can provide a theoretical guidance for operation and optimal design of the cyclone separator.     

Calculating the Hollowing-center Grounding Device Resistance Based on the Surface Charge Simulation Method

An equivalent model for hollowing-center grounding device is proposed, the hollowing-center grounding device resistance is calculated with the surface charge simulation method and the computer programme is programmed based on this model. The accuracy of the model and method is validated by experimentation.     

Numerical Analysis and Optimization of a Small Vehicle Heat Exchanger

This paper analyzes the fluid flow and heat transfer of the heat exchanger, and obtainsd the distribution of fluid field, heat field and pressure field in heat exchanger. According the analysis result, some modify measure is adopted, such as decreasing the number of tube bundle, the size of baffle plate and increasing the diameter of exchange heat tube. In the new heat exchanger, the resistance decreased 32.3%, is 103.2 Pa and the temperature of the exit is 130 K. The new heat exchanger satisfies the requirement of exchanging heat. The study indicates that adopting the numerical simulation method could get temperature, pressure and fluid - velocity of anywhere of the heat exchanger, and understand effecfing of structure parameter on fluid flied and heat flied of the heat exchanger. Therefore, it provides a new method for optimization design of heat exchanger.     

STUDY OF DIGITAL SIMULATION MODEL FOR THE MAGNETIZING CHARACTERISTIC OF REACTANCE TRANSFORMER

Based on the experiment, magnetizing characteristic and its mathematical model of iron for the reactance transformer DKB has been studied in this paper. Its simulating calculation model has been achieved and implemented by program. The result of the simulation is satisfactory compared with that of the experiment.     

Monitoring and Assessment of Tie on the Caiyuanba Yangtze Bridge

The monitoring and assessment scheme of the Caiyuanba Yangtze Bridge is present by sensitivity analysis. The mechanics character of the six ties is studied by numerical simulation, and then the sensor location and selection are discussed considering the technique of sensor and construction situation. The trend of the displacement at the sensor location is analyzed according to different damage level of ties, the pattern associating with several displacements which are sensitive to damage at ties is bring forward to improve assessment reliability. The result can assist implement of structural health monitoring system to the same type as this bridge.     

Soft-switching Analysis Phase-Shifted-FB-ZVS-PWM DC-DC Converter With Saturable Inductor

Compared with the traditional full-bridge(FB)zero-voltage-switched(ZVS) pulsewidth-modulated(PWM) converter, the FB-ZVS-PWM converter with a saturable inductor has a wider load range with ZVS and smaller circulating energy as well as smaller duty cycle loss. By analyzing the operation principle of the converter, this paper studies design considerations of the parameter bringing about ZVS and dead time of the switch, and gives out the design method, finally simulation testing has been carried out.     

Harmonic Analysis and Suppression of High-frequency Welding Devices

This paper analyzes the structure and line current waveform of 3-phase AC voltage regulation circuit. As an application of 3-phase AC voltage regulation circuit, a high-frequency welding device's simulation model and harmonic analysis of line current are presented. Results of simulation are compared to field measurements. The two are in a good agreement, so this simulation model is correct. Two single-tuning filters and one second-order HPF are designed according to the device's harmonic condition. Simulation results of the circuit with filters indicate decrease of the harmonics in current of power supply, and the waveform is close to sinusoidal wave, which prove correctness of the solution to harmonics pollution.     

Design Process Simulation Based On Information Dependency

A modeling method based on DSM is introduced. In circumstance of iterative task, the ways concerning about the input of data,the generation of stochastic variables and the set of the simulation clock are dipicted. While considering the learning curve of activities, the way is studied express the movable process of a single project and then list the corresponding Monte Carlo simulative block diagram .The program based of EXCEL VBA is also written. The result of a given simulative example shows that the method can simulate complex design activities and plan the project in terms of scientific basis.