海贝柱自动晾晒设备设计

针对当前传统人工晾晒海贝柱效率低下、容易造成污染等问题。设计了海贝柱自动晾晒机械,采用阶梯式晾晒生产线对湿海贝柱分级晾晒,多条晾晒生产线分时、高效的工作,机器上方设有遮板以保证晾晒作业不被污染而且不受天气条件的影响。整机采用stm32单片机、传感器等技术实现自动化作业,机器控制系统监测到生产线发生故障或海贝柱出现堆积时会立即停止工作以便于检查故障、减少损失。试验结果表明:机械晾晒不会造成海贝柱内的营养成分的流失,机械晾晒海贝柱的干基含水率达到30%仅需12h,机械晾晒海贝柱能节省大量的干燥时间,显著的提高了晾晒效率,避免了人工晾晒过程导致的二次污染和损失。该研究为海贝柱自动晾晒机械的研制提供了技术参考。     

Evaluation of a combined penetrometer for simultaneous measurement of penetration resistance and soil water content

A combined penetrometer is an appropriate tool to measure the soil cone resistance and the water‐content profile. As a relatively new technique, a combined capacitance‐penetrometer for the simultaneous measurement of cone index and soil water content was developed at the Department of Agricultural Engineering of Bonn University in 2002. The objective of this study was the evaluation of the effectiveness and applicability of the innovated penetrometer with a focus on three aspects: (1) A capacitance sensor with two electrode configurations was calibrated for silt loam, sandy loam, and sand. The calibration results show that both electrode configurations have sufficient water‐content sensitivity, but soil‐specific calibrations seem necessary. (2) Under laboratory conditions, the dynamic resolution and response of the capacitance‐penetrometer were validated, and its radius of influence was determined. (3) The field measurement results demonstrate that this measurement technique can be used to improve the interpretation quality of soil cone index data.     

木材干燥应力连续监测方法的研究

本文在卡普法的基础上，提出了木材干燥应力连续监测方法，并设计了所需的配套装置。该方法采用涡流传感器对干燥过程中卡普片的矢高进行连续测试，同时通过计算机自动采集、存储数据。结果表明：矢高与干燥时间存在精密的相关性，它们之间的相关系数大部分达到0．99以上，从而实现了木材干燥应力的自动与连续监测。     

Compatible measurements of volumetric soil water content using a neutron probe and Diviner 2000 after field calibration

Field calibrations for a neutron probe and a capacitance sensor (Diviner 2000) for measuring the soil water content of a shrinking–swelling clay soil were substantially different from commonly used default values. Using our field calibrations, the two instruments estimated similar changes in the cumulative water content of a soil profile (0–1 m depth) over one growing season.     

电阻电桥传感放大器性能的改善

在构成基本型电阻电桥传感放大器的基础上给出了三种改善其性能的方法。１）补偿法。２）补偿加放大器改进综合法。３）负反馈法。通过实验证明了理论分析和实际效果是一致的，从而对电阻传感器在非电量检测中的广泛应用具有一定的实际意义。     

双板差分冲量式谷物流量传感器设

设计了一种双板冲量式谷物流量传感器及其差分消振电路,以消除车身振动对测产精度的影响.振动试验表明,在没有谷物输入时联合收获机车身振动导致前后2个检测板产生的2个振动信号是一对共模信号,可通过电路差分的方法消除;差分后传感器的输出电压的信噪比由2.5dB提高到62dB.在零喂入量情况下,振动产生的零点误差小于0.01g/s;在联合收获机正常作业的喂入量范围内(0.5～2kg/s),实验室测量误差小于3%.田间实际测量误差不大于5%.     

甘蔗横向种植机补种系统设计与试验

针对甘蔗横向种植机在种植过程中出现的漏播问题,设计了一套基于51单片机的甘蔗实时补种系统。通过对充种、储种、供种、护种及投种过程进行运动学和动力学的仿真分析,确定了影响补种效果的主要因素,设计了补种系统的关键部件。该系统采用AT89C52单片机、3套对射型激光传感器分别对漏种、补种箱和储蔗槽中蔗种余量不足的情况进行信号采集,进行漏种计数显示和实现蔗种余量不足时的报警,步进电机作为动力源,驱动辊耙转动完成补种过程。选取行进速度和补种辊槽数为试验因素,以补种成功率和重置率为补种性能指标,进行了二因素五水平的正交旋转组合试验。结果表明,行进速度对补种成功率的影响极显著,补种辊槽数对补种成功率的影响极显著;利用Excel软件进行了二次回归方程分析,得出当行进速度为3 km/h、补种辊槽数为10个时,补种成功率达到93.97%,重置率为1.69%。设计的实时补种系统性能稳定可靠,解决了播种器工作过程中的漏种问题。     

基于无线传感网络隧道亮度信号采集系统的研究

亮度信号是高速公路隧道节能照明控制系统必须检测的物理量。本文基于zigbee的技术特点，设计了一款基于无线传感网络的隧道亮度信号采集系统。系统的传感器节点负责亮度信号的采集，经CC2530处理发送，通过逐级跳转的方式把数据传输到协调器。协调器通过RS232串口与灯具控制器通信，以此实现对亮度信号的实时采集和可靠性传输。通过实验表明，该系统达到了设计的目的，并适用于高速公路隧道节能照明控制系统。     

A calibration method of detecting soil water content based on the information-sharing in wireless sensor network

In agricultural production, there is contradiction between the cost and accuracy of detection during the course of acquiring soil water content (θ) online. This conflict is one of the core issues of automatic water-saving irrigation technology in agriculture. At the same time, capacitive soil moisture sensor (CSMS) has received considerable attention, for it can acquire θ with low cost and high precision, and meet the application requirements of wireless sensor network (WSN). But CSMS is vulnerable to the soil temperature (T_s) and salinity (S_s) in the measurement process. Therefore, this study took EC-5 sensor for example to establish water detection calibration models of soil temperature and salinity for single sensor, using Least Squares Support Vector Machines on MatLAB (LS-SVMlab) as the tool. On this basis, we explored the spatial variability of T_s and S_s, and then a method, which could be used to calibrate the output signals of sensors in multi-point network, was proposed based on the information-sharing (T_s or S_s) technology of WSN. Through laboratory experiment, we effectively reduced the impact of soil temperature and salinity on the single sensor. In example analysis, we investigated the detection precision and costs under different information-sharing radiuses (r). And the results indicated that the method we proposed based on the information-sharing technology of WSN could successfully calibrate the influence of soil temperature and salinity on sensors in multi-point network, and it was an efficacious approach to determine the balance between the calibration accuracy of moisture sensor and the investment of agricultural production. For example, while the calibration precision of soil temperature and salinity is respectively 1%, the costs can be reduced by 30%.     

农业种植养殖传感器产业发展分析

传感器技术是智慧农业建设中的一项关键技术,目前我国农业传感器的应用存在诸多问题,严重制约着农业产业化的进一步发展。本文对比了国内外农业物联网技术应用与集成的现状,并提出了相应的发展策略,最终提出了关于农业种植养殖产业的未来研究重点与发展方向的观点。