Performance Analysis of Anti-CW Interference in MC-CDMA Systems

The multicarrier-code division multiple access (MC-CDMA),which is the combination of direct sequence CDMA (DS-CDMA) and orthogonal frequency division multiplexing (OFDM) techniques, offers various advantages over single-carrier CDMA system. Some of the advantages are that MC-CDMA systems possess can remove the intersymbol interference (ISI) and enhance narrow-band interference suppression capabilities. So the MC-CDMA technique becomes a focus in the field of mobile communication. The authors introduce the typical MC-CDMA system model, discuss the decision statisticalvariable in Rayleigh fading channel included the CW interference, and give the expressions of probability of error in uplink. An approach is proposed with Modified Equal Gain Combining (MEGC) to decrease the effect of CW interference. Theoretical analysis and numerical results show that the anti-CW interference performance of MC-CDMA system can be improved used the MEGC approach.     

A Research on the Way of EMBET in the Tracking Systems'' Accuracy-analysis During Satellite Launch

In the past, the criterion for calibration has almost invariably been the stellar oriented ballistic camera,the method is a point to point comparison on the identical coordinate system. Deficiencies is follows: The request of weather is severe(cloudless night); The period is often long; the measure equipment of high precision can't be calibrated. While EMBET methods is used in calibration, it does not need criterion and it demands only that the measure elements is larger than 3,and the trajectory and many system errors of the measure elements can be simultaneously calculated with the measure data sequences. The error models of related equipments' measure elements and the EMBET of typical equipment group are given. The EMBET method is successfully used in Accuracy-analysis of Satellite Launch.     

机床传动误差测量中的空域法分析

从空间域的角度讨论了信号处理的一种特殊方法，介绍了它的特点，建立了空域傅氏变换数学模型，并且给出了实用效果。实践证明空域分析法应用于机床传动链一类的特殊场合是有效的。     

使用迭代重加权最小二乘法求解平面度误差

提出了几何误差评定的迭代重加权最小二乘（IRLS-Iterative Reweighted Least Squares)算法。该算法采用一个迭代过程求解一系列加权最小二乘问题，并在每一步迭代中按照一定的规则对权系数进行调整，使其逐步逼近最优拉格朗日乘子。对于用CMM(坐标测量机)和其他设备得到的数据，可得到平面度误差的精确值。     

计算机图解适线法

该文编制的计算机图解适线法程序,对于总体为皮尔逊Ⅲ型分布的样本系列,能够利用计算机屏幕(或绘图仪)目估适线。主要计算结果为适线法确定的参数X、CV和CS,以及任何指定频率的设计值XP。     

离心泵整体叶轮流道数控加工误差的仿真

对数控加工所获得的叶轮流道的加工误差进行仿真。首先对刀位轨迹线进行归一化处理,以此计算出脊棱高度曲线,再采用线性插值的方法得到曲面上采样点的加工误差。由于自由曲面加工中的刀位点比较密集,本文利用彩色云图将加工误差可视化,完善了对数控加工结果的计算机几何仿真。该算法已在自行研制的叶轮CAM系统中得到验证,并且与实际加工结果一致。     

单位线方法在沿渡河流域的应用研

单位线方法在水文计算及洪水预报中得到了广泛的应用，至今仍然是汇流计算的重要工具。以沿渡河流域为研究背景，分别采用分析法及矩法推求了该流域的时段单位线，并分别用这两种单位线模拟了该流域的同次洪水过程，模拟结果表明分析法得到的单位线更加适合该流域的洪水计算。最后，在详细分析两种方法误差来源的基础上，提出了相应的改进措施。     

水科学中应用数理统计方法应注意

对回归方程误差的影响因素进行了分析，导出了回归方程的均方误差与其影响因素之间的关系式。分析表明，复相关系数(或相关系数)一定时，倚变量的变差系数越大，回归方程的均方误差就越大；回归分析时，应对回归方程的误差进行分析。对于样本均值估计总体均值，给出了基于误差限制的样本容量的计算式。研究表明，应考虑样本变差系数对估计精度的影响。