"双高"糖料蔗高产种植栽培技术

灵山县贯彻落实国家和自治区部署，加快推进优质高产、高糖糖料蔗基地建设，目前已建成近1333.4hm²“双高”基地，并通过实施“双高”糖料蔗高产种植栽培技术，平均亩产达到8T，蔗糖分达到14%以上。     

玉米单倍体高自然加倍材料吉Gjb335DH3的遗传分析与QTL初定位研究

玉米单倍体育种技术加倍率低的问题是单倍体育种技术应用限制条件。本研究以雄穗低自然加倍材料DHL287为母本、雄穗高自然加倍材料吉Gjb335DH³为父本，构建单倍体雄穗高自然加倍群体。根据集群分离分析法（BSA，Bulked segregant analysis），结合SNP标记，使用滑动窗口分析3组BSA混池基因型数据，最终在1、3、4、5、7号染色体上筛选出23个与雄穗高自然加倍相关的QTL位点。其中，3组BSA混池结果都在1、3、4号染色体上定位到4个共有的显著QTL区段，说明4个QTL区段具有很强的重演性。同时，在5、7号染色体上分别定位到3个、2个与单倍体雄穗高自然加倍相关的QTL位点。     

南方双季稻区小行距插秧机的改进设计与试验

针对300mm行距插秧机在南方双季稻区栽插行距过大、穴数过少及不能充分发挥机插稻的增产潜力问题,在300mm行距插秧机结构的基础上,通过机械优化设计和田间农艺技术相结合的方法,对其插植部箱体、苗箱、支架(包括左右支架和中间支架)和浮板4个关键部位技术参数改进设计,研制出了适合南方双季稻区作业的2ZS-488B型(264mm行距)插秧机,并于2012-2013年在江西省2个试验点进行不同早晚稻品种机插行距的大田对比试验。结果表明:该插秧机作业性能稳定,漂秧率、伤秧率和漏插率分别为1.55%、2.68%和1.93%,相对均匀度合格率为89.54%。与300mm行距插秧机相比,其产量平均增产529.43kg/hm2,平均增产率达8.57%。该研究结果创新了南方双季稻区新的机械化栽插方式,有利于农机农艺的有效融合。     

信息技术用于汽车纵梁制造的探讨

文章以为汽车行业的健康发展提供指导和借鉴为目的,主要对汽车的纵梁平面图纸集成化制造中诸如参数提取、纵梁3D模型构建技术和Agent的网络集成技术的应用方法等进行了相关论述,以此为实现汽车行业的可持续发展而做出贡献。     

Measurement and Analysis of Prestressed Concrete Flat Beam- Waffle Slab System During Prestressing

During the pre - stressing of the unbonded prestressed concrete wide flat beam - waffle slab system, the displacements and strains of slab and the prestressed concrete beams were site - measured and the results were analyzed. The prestressing construction was simulated by finite element program. The prestressing efficiency of the unbonded prestressed concrete wide flat beam - waffle slab system was discussed. It indicates that the prestressing efficiency was affected by the in -plane stiffness of slab.     

Intensity Comparative Analysis Based on Ideas Between Involute Gear and Double Involute Gear

Modeler and simulation modules in Ideas software are used to build the finite element models on involute gear and double involute gear with accurate tooth shape, and with the same design parameters and under the same loads, finite element contact analysis has been done. At last, the contact stress and bending stress on the two types gear transmission at the different meshing positions are solved out, and comparative analysis and study have been done. At the same time, that the ladder-shape tooth on the double involute gear how to influence contact stress and bending stress is emphatically analysed. All above offer the theoretical foundation that bring the double involute gear with ladder-shape tooth into the industry.     

A Receiving Surface of Perturbative Photon Fluxes in Interaction Between Gravitational Waves and EM Fields

According to Electrodynamics in curved spacetime, the interaction between gravitational waves (GW) and electromagnetic (EM) fields will produce perturbative electromagnetic fields. In a special EM system, namely, a Gaussian beam (Gb) propagating through a static magnetic field, the photon flux along the direction of the electric field of the Gb will be only a pure perturbative photon flux,when a GW propagates along the symmetric axis of a Gaussian beam. Detailed alanysis and calculation of the photon flux along several typical surfaces are performed, and a possible optimum plane which can receive perturbative photons up to 10~4s~(-1) is proposed. It is possible to provide an important method to detection of GW.